A method for analysing the vehicle–bridge interaction system with enhanced objectivity is proposed in the paper, which considers the time-variant and random characteristics and allows finding the power spectral densities (PSDs) of the system responses directly from the PSD of track irregularity. The pseudo-excitation method is adopted in the proposed framework, where the vehicle is modelled as a rigid body and the bridge is modelled using the finite element method. The vertical and lateral wheel–rail pseudo-excitations are established assuming the wheel and rail have the same displacement and using the simplified Kalker creep theory, respectively. The power spectrum function of vehicle and bridge responses is calculated by history integral. Based on the dynamic responses from the deterministic and random analyses of the interaction system, and the probability density functions for three safety factors (derailment coefficient, wheel unloading rate, and lateral wheel axle force) are obtained, and the probabilities of the safety factors exceeding the given limits are calculated. The proposed method is validated by Monte Carlo simulations using a case study of a high-speed train running over a bridge with five simply supported spans and four piers.
6 October 2022 in International Journal of Rail Transportation
This paper adopts a proficient approach to evaluate vibration and structure-borne noise and makes up for the steel-concrete composite (SCC) box girder vacancy in the SCC structure. First, the dynamic equation of the train-rail system is established, the pseudo-response of the system in the frequency domain is appropriately assessed by pseudo excitation method (PEM), and the frequency spectra of the wheel-rail force as well as the forces transmitted to the bridge are obtained. Next, applying the force to the finite element method (FEM), boundary element method (BEM), and statistical energy analysis (SEA) model. The vibration and structure-borne noise of the SCC box girder are calculated in the frequency domain. Then, the effectiveness of the method and model is verified through the comparison of the field experimental results. Finally, the effect of the ground reflection in the SEA model is considered using the sound ray-tracing method for the first time.
With the increase in train speeds on high-speed railways, the excitation frequency of track irregularities increases, which has a negative impact on train comfort and opposes the passengers’ desire for high ride comfort. In addition, the uncertainty of train comfort results from the stationary randomness of track irregularities and the different zonal distribution in the car body. Therefore, the application of the stationary random vibration method to analyze the zonal distribution of train comfort and the relevant influencing factors is important to guarantee the passengers’ comfortable experience in each ride and to provide a theoretical basis for comfort optimization. First, the train was modeled using eight independent vehicle elements. Second, the pseudo-excitation method was applied to obtain the theoretical zonal distribution of the Sperling index, an indicator of comfort, via the linearity of the power spectrum density of train acceleration. Third, considering various factors affecting train comfort, the results were compared with those calculated using the Monte Carlo method. It was found that the most comfortable area was located slightly in the front of the center of the car body. Improving track irregularities and reasonably controlling the speed of a train will increase the train’s comfort, while it will deteriorate with a loss in car-body mass and damage to the secondary suspension system.
With the continuous improvement in the operation speed of trains, the impact of train–induced vibration through the track on the bridge is increasingly prominent. In particular, when the loading frequency is the same as or close to the natural frequency of the bridge, the resonant response of the bridge will be activated, which will probably endanger the safety of the operation and the bridge structure. Normally, the traditional method to indicate the appearance of resonant response is to analyze the frequency spectrum of the response through the Fourier transform from its time history. However, it can simply reflect the contribution of different frequency components within a stationary window. Therefore, continuous wavelet transform is adopted on a 2D train–track–bridge interactive system in this article. It illustrates the evolutionary characteristics of different frequencies from the input excitation to the output response during the bridge resonance in the time–frequency domain, compared with the cases when the bridge is nonresonant. Finally, the article demonstrates the feasibility of the method. It concludes that the resonance and quasi–resonance–triggering band accounts for the highly intensified bridge response, while the staggering domination between the steady-state and the transient response is the main phenomenon for the nonresonant bridge. Additionally, within the low–frequency band, the resonant bridge will have a more significant impact on the track subsystem than the train subsystem.
25 September 2024 in International Journal of Structural Stability and Dynamics
Vibrations generated by railways may undergo amplification or reduction while traversing the foundations, floors, and spans of adjacent structures. This fluctuation in the vibration intensity, identified as a building’s coupling loss, is commonly considered in vibration forecasts through the utilization of universal frequency-independent adjustment parameters. This article employs a theoretical analytical approach to investigate the propagation characteristics of Rayleigh waves in elastic foundation soil, as well as the variations at the contact surface of buildings’ foundations. Analytical expressions for the coupling loss coefficient are derived to explore the displacement transfer relationship in the soil–structure interaction. To accurately and efficiently analyze the proposed buildings and site, the entire vibration propagation system is decoupled into substructure systems for independent analytical calculations. Theoretical analytical methods are utilized to obtain the displacement transfer functions between the soil and the structures through the refraction and transmission of waves. From a theoretical perspective, a thorough understanding of the interaction between soil and buildings is achieved. The influence of various variables related to railways and foundations on the building responses is analyzed. By comparing with measured data, the correctness of the analytical form of the coupling loss coefficient is validated, filling a gap in the literature due to the lack of analytical research on displacement transfer losses in soil–structure interactions.