Modern optical measurement technologies such as structured light microscopy or fringe-projection profilometry rely fundamentally on structured illumination of the specimen or probe. Miniaturizing the applied illumination concept enables the availability of these methodologies even in spatial domains that have remained inaccessible so far. Here we introduce a design methodology to realize complex illumination patterns with high diffraction efficiencies in a strongly miniaturized and functional integrated approach. This is achieved by combining the advantages of refractive freeform wavefront tailoring and diffractive beam shaping. This novel concept overcomes classical stray light issues known from conventional diffractive beam shaping and remains valid for micro-optical systems, i.e., beyond the geometric optical regime. Moreover, the design process is in particular optimized to reduce the aspect ratio of the obtained surface features. This strongly improves the manufacturability and as-built performance of the designed optical element, and the feasibility of the approach is demonstrated by the design and realization of monolithic beam shaping units on the tips of optical fibers via two-photon direct laser writing. This provides the means to realize complex illumination patterns in an integrated and mechanically flexible approach.
In-bulk processing of materials by laser radiation has largely evolved over the last decades and still opens up new scientific and industrial potentials. The development of any in-bulk processing application relies on the knowledge of laser propagation and especially the volumetric field distribution near the focus. Many commercial programs can simulate this, but, to adapt them, or to develop new methods, one usually must create a specific software. Besides, most of the time people also need to measure the actual field distribution near the focus to evaluate their assumptions in the simulation. To easily get access to this knowledge, we present our high-precision field distribution measuring method and release our in-house software InFocus [https://github.com/QF06/InFocus], under the Creative Commons 4.0 license. Our measurements provide 300 nm longitudinal resolution and diffraction limited lateral resolution. The in-house software allows fast vectorial analysis of the focused volumetric field distribution in bulk. Simulations of the linear propagation of light under different conditions (focusing optics, wavelength, spatial shape, and propagation medium) are in excellent agreement with propagation imaging experiments. The aberrations provoked by the refractive index mismatch as well as those induced by the focusing optics are both taken into account. The results indicate that our proposed model is suitable for the precise evaluation of energy deposition.
For scanning systems the resolution, distortion as well as the telecentricity are important performance criteria. For two-dimensional scanning systems, scan mirrors deflecting in only one transverse direction are not allowing for telecentricity in x and y simultaneously in case of an axisymmetric system. It is possible to achieve two-dimensional telecentricity by splitting the pupils in x- and y-direction and shifting the principal planes in one dimension by changing the focal power using an anamorphic setup. However, for higher specifications concerning a large aperture and wide scanning angle, using cylindrical lenses are not enough to achieve a good system quality. It has been proved in many researches that freeform surfaces are effective to improve the resolution of systems without rotational symmetry. In this work, a systematic case study is presented to investigate the potential of freeform surfaces to improve the resolution, telecentricity, and distortion simultaneously. It is shown as a result that freeform surfaces offer large correction ability in all the three aspects concerning high specifications of 2D-telecentric anamorphic scan systems. This contribution provides the insight into the application of freeform surfaces in non-rotationally symmetric optical systems with refractive components.
A new method for the characterization of coherent laser beams is proposed. It is based on the non-iterative solution of the transport-of-intensity-equation. The phase to recover is decomposed into paraxial properties of laser beams and a set of lateral shifted radial basis functions, which allows for the derivation of a direct solution of the phase by a least-squares fit without the need of an initial guess. The method is tested with synthetic data to deduce an accuracy metric. Additionally, two real laser beams are characterized. Including the real light source in terms of the reconstructed field allows for a more holistic simulation of optical systems.
The correction of spatial resolution and distortion in imaging spectrometer systems is of great importance due to their significant impact on efficiency and quality. In this study, we analyze the corrective power of freeforms added at different positions in various spectrometer systems for high-performance requirements. The results show that the combination of a freeform prism and a second freeform close to the image has the best correction of distortion while preserving spot size.
16 December 2019 in Journal of the Optical Society of America A
Many applications of ultrashort laser pulses require manipulation and control of the pulse parameters by propagating them through different optical components before the target. This requires methods of simulating the pulse propagation taking into account all effects of dispersion, diffraction, and system aberrations. In this paper, we propose a method of propagating ultrashort pulses through a real optical system by using the Gaussian pulsed beam decomposition. An input pulse with arbitrary spatial and temporal (spectral) profiles is decomposed into a set of elementary Gaussian pulsed beams in the spatiospectral domain. The final scalar electric field of the ultrashort pulse after propagation is then obtained by performing the phase correct superposition of the electric fields all-Gaussian pulsed beams, which are propagated independently through the optical system. We demonstrate the application of the method by propagating an ultrashort pulse through a focusing aspherical lens with large chromatic aberration and a Bessel-X pulse generating axicon lens.