Ultrafast laser welding is a fast, clean, and contactless technique for joining a broad range of materials. Nevertheless, this technique cannot be applied for bonding semiconductors and metals. By investigating the nonlinear propagation of picosecond laser pulses in silicon, it is elucidated how the evolution of filaments during propagation prevents the energy deposition at the semiconductor–metal interface. While the restrictions imposed by nonlinear propagation effects in semiconductors usually inhibit countless applications, the possibility to perform semiconductor–metal ultrafast laser welding is demonstrated. This technique relies on the determination and the precompensation of the nonlinear focal shift for relocating filaments and thus optimizing the energy deposition at the interface between the materials. The resulting welds show remarkable shear joining strengths (up to 2.2 MPa) compatible with applications in microelectronics. Material analyses shed light on the physical mechanisms involved during the interaction.
Direct three-dimensional (3D) laser writing of waveguides is highly advanced in a wide range of bandgap materials, but has no equivalent in silicon so far. We show that nanosecond laser single-pass irradiation is capable of producing channel micro-modifications deep into crystalline silicon. With an appropriate shot overlap, a relative change of the refractive index exceeding is obtained without apparent nonuniformity at the micrometer scale. Despite the remaining challenge of propagation losses, we show that the created structures form, to the best of our knowledge, the first laser-written waveguides in the bulk of monolithic silicon samples. This paves the way toward the capability of producing 3D architectures for the rapidly growing field of silicon photonics.
In order to control the length of micro-channels ablated at the surface of dielectrics, we use annular filtering apertures for tailoring the depth of focus of micrometric Gaussian-Bessel beams. We identify experimentally and numerically the appropriate beam truncation that promotes a smooth axial distribution of intensity with a small elongation, suitable for processing micro-channels of small aspect ratio. Single-shot channel fabrication is demonstrated on the front surface of a fused silica sample, with sub-micron diameter, high-quality opening, and depth of few micrometers, using 1 ps low-energy (< 0.45 µJ) pulse. Finally, we realize 10 × 10 matrices of densely packed channels with aspect ratio ~5 and a spatial period down to 1.5 μm, as a prospective demonstration of direct laser fabrication of 2D photonic-crystal structures.
In-bulk processing of materials by laser radiation has largely evolved over the last decades and still opens up new scientific and industrial potentials. The development of any in-bulk processing application relies on the knowledge of laser propagation and especially the volumetric field distribution near the focus. Many commercial programs can simulate this, but, to adapt them, or to develop new methods, one usually must create a specific software. Besides, most of the time people also need to measure the actual field distribution near the focus to evaluate their assumptions in the simulation. To easily get access to this knowledge, we present our high-precision field distribution measuring method and release our in-house software InFocus [https://github.com/QF06/InFocus], under the Creative Commons 4.0 license. Our measurements provide 300 nm longitudinal resolution and diffraction limited lateral resolution. The in-house software allows fast vectorial analysis of the focused volumetric field distribution in bulk. Simulations of the linear propagation of light under different conditions (focusing optics, wavelength, spatial shape, and propagation medium) are in excellent agreement with propagation imaging experiments. The aberrations provoked by the refractive index mismatch as well as those induced by the focusing optics are both taken into account. The results indicate that our proposed model is suitable for the precise evaluation of energy deposition.
In-volume ultrafast laser direct writing of silicon is generally limited by strong nonlinear propagation effects preventing the production of modifications. By using advantageous spectral, temporal, and spatial conditions, we demonstrate that modifications can be repeatably produced inside silicon. Our approach relies on irradiation at wavelength with temporally distorted femtosecond pulses. These pulses are focused in a way that spherical aberrations of different origins mutually balance, as predicted by point spread function analyses and in good agreement with nonlinear propagation simulations. We also establish the laws governing modification growth on a pulse-to-pulse basis, which allows us to demonstrate transverse inscription inside silicon with various line morphologies depending on the irradiation conditions. We finally show that the production of single-pulse repeatable modifications is a necessary condition for reliable transverse inscription inside silicon.
When the energy of a short laser pulse is localized in a fluid material, a flow motion is induced that can lead to the generation of free-surface jets. This nozzle-free jetting process is exploited to print conductive materials, typically metal nanoparticle inks, but this approach remains limited to the transfer of low viscosity fluids with a minimum feature size of few micrometers. We introduce a dual-laser method to achieve reproducible high-aspect-ratio jets from thin solid films. A first laser irradiation induces the melting of copper thin films and a second synchronized short pulse irradiation initiates the jetting process. Using time-resolved microscopy, we investigate the influence of the film thickness on the flow motion mechanisms and the ejection dynamics. For a wide range of laser fluences, we present observations similar to those obtained when the jets are generated by a single laser pulse from liquid donor films. The use of a solid film allows reducing the film thickness and then the volume of transferred material. Finally, we analyze these results in the perspective of using this double pulse LIFT technique for additive manufacturing of nano-micro-structures. Stable jets are formed from the copper films over distances exceeding 50-μm and are exploited to demonstrate periodic printing of 1.5-μm diameter droplets.