Weiping Liu

Weiping Liu


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 February 2023 in Aerospace
Verified
Journal Article
Open access
PDF file
YCYonglin Chen
Yonglin Chen
JZJunming Zhang
Junming Zhang
ZLZefu Li
Zefu Li
ZHZhang Huliang
Zhang Huliang
JCJiping Chen
Jiping Chen
Yan LiYan Li
Yan Li
Lightweight fiber-reinforced composite structures have been applied in aerospace for decades. Their mechanical properties are crucial for the safety of aircraft and mainly depend on manufacturing technologies such as autoclave, resin transfer molding and automated layup technology. In recent years, the rapid development of intelligent technology such as big data, deep learning, and machine learning has encouraged the development of manufacturing technologies to become low-cost, automatic, and intelligent. However, the current situation and intellectualization of manufacturing technologies is not well summarized. This paper reviews the advances in manufacturing technologies for fiber-reinforced composite structures, including autoclave, out of autoclave, resin transfer molding technologies, automated layup technology and additive manufacturing technology. Then, these technologies are compared in advantages and disadvantages, and their intellectualization development and challenges are also discussed. Finally, the development trend of intelligent manufacturing technologies and intelligent composite structures are discussed. This work can provide a reference for researchers in the related filed.

30 March 2022 in Polymers
Verified
Journal Article
Open access
PDF file
QSQinghua Song
Qinghua Song
WLWeiping Liu
Weiping Liu
JCJiping Chen
Jiping Chen
DZDacheng Zhao
Dacheng Zhao
CYCheng Yi
Cheng Yi
YYYuhui Yuan
Yuhui Yuan
Automated fiber placement (AFP) in situ consolidation of continuous CF/high-performance thermoplastic composite is the key technology for efficient and low-cost manufacturing of large thermoplastic composites. However, the void in the in situ composite is difficult to eliminate because of the high pressure and the short consolidation time; the void content percentage consequently is the important defect that determines the performance of the thermoplastic composite parts. In this paper, based on the two-dimensional Newtonian fluid extrusion flow model, the void dynamics model and boundary conditions were established. The changes of the void content percentage were predicted by the cyclic iteration method. It was found that the void content percentage increased gradually along the direction of the layers’ thickness. With the increasing of the laying speed, the void content percentage increased gradually. With the increasing of the pressure of the roller, the void content percentage gradually decreased. When the AFP speed was 11 m/min and the pressure of the compaction roller reached 2000 N, the void content percentage of the layers fell below 2%. It was verified by the AFP test that the measured results of the layers’ thickness were in good agreement with the predicted results of the model, and the test results of the void content percentage were basically equivalent to the predicted results at different AFP speeds, which indicates that the kinetic model established in this paper is representative to predict the void content percentage. According to the metallographic observation, it was also found that the repeated pressure of the roller was helpful to reduce the void content percentage.

1 July 2024 in Polymers
Verified
Journal Article
Open access
PDF file
WLWeibo Liu
Weibo Liu
CWCaiyun Wang
Caiyun Wang
YFYu Feng
Yu Feng
YCYongfeng Chen
Yongfeng Chen
LWLiqiang Wan
Liqiang Wan
WLWeiping Liu
Weiping Liu
Most toughening methods for epoxy resins are usually used at the expense of other properties. Some polyhedral oligomeric silsesquioxanes (POSSs) with both a rigid Si-O-Si structure and flexible organic chain segments could be expected to be effective toughening agents. In this study, three reactive polyhedral oligomeric silsesquioxanes with a thiol group (OMPPS), a carboxyl group (OCOPS), and an epoxy group (OGCPS) were synthesized and characterized. They were utilized as modifiers to toughen 3-(oxiran-2-ylmethoxy)-N,N-bis(oxiran-2-ylmethyl)aniline (AFG-90MH)/4,4′-methylenebis(2-ethylaniline) (MOEA) (epoxy resin) with different molar ratios to obtain hybrid resins named OMPPS-EP-i, OCOPS-EP-j, and OGCPS-EP-k. The effects of the amount of modifier added and the length of the organic chain on the cage structure on various properties of the hybrid resins were investigated. The results show that all three modifiers show good compatibility with the epoxy resin. The hybrid resins have a low viscosity at 45~85 °C and can be cured at a low temperature (110 °C). The cured hybrid resins display improved toughness. Typically, the critical stress intensity factor (KIC) and impact strength of OGCPS-EP-0.6-C are 2.54 MPa∙m−1/2 and 19.33 kJ∙m−2, respectively, which increased by 58.75% and 22.48% compared with the pristine epoxy resin, respectively. In addition, the glass transition temperature and flexural strength of the hybrid resins are basically unchanged.

13 May 2025 in Polymers
Verified
Journal Article
Open access
PDF file
ZLzhefu li
zhefu li
QSQinghua Song
Qinghua Song
JLJun Liu
Jun Liu
WLWeiping Liu
Weiping Liu
PCP. Chen
P. Chen
GYGuangquan Yue
Guangquan Yue
Hot press preforming of unidirectional prepreg composites plays a key role in the manufacturing of aerospace components. However, defect prevention remains challenging due to complex fiber reorientation and inter-ply friction phenomena that occur during the forming process. To address these challenges, this study proposes an integrated modeling approach comprising three key components: (1) a simplified linear friction model for characterization of inter-ply slip behavior, (2) a fiber-tracking algorithm that accounts for anisotropic deformation characteristics, and (3) a coupled linear shell–membrane formulation for simultaneous modeling of in-plane and out-of-plane deformation behaviors. The proposed approach is validated through comprehensive material characterization, finite element simulation, and experimental comparisons based on a 2 m Ω-stringer geometry. Simulation results align well with experiments, showing the model’s ability to predict defects. Parametric analysis also identifies temperature as a key factor in controlling interfacial friction and improving formability, with optimal results at 75 °C. This integrated modeling approach provides an effective approach for defect prediction and process optimization, contributing to reduced material waste and improved efficiency in aerospace composite manufacturing.

Verified
Journal Article
Open access
PDF file
WDWei Du
Wei Du
JLJun Liu
Jun Liu
HSHao Song
Hao Song
MJMinqiang Jiang
Minqiang Jiang
BNBo Ning
Bo Ning
JYJianyong Yu
Jianyong Yu
To investigate the resin infusion molding process for novel dry fiber-reinforced epoxy composite wing skin, dry fiber preforms were fabricated via an automated fiber placement (AFP) system, and the out-of-plane permeability of the preforms at different lay-up speeds was measured using the ultrasonic transmission method to determine the optimal lay-up parameters. A scaled-down composite wing skin structure was modeled and meshed via numerical simulation, and different resin infusion schemes were simulated and analyzed using PAM-RTM software. The optimal infusion scheme was determined by comparing the infusion time, infusion pressure and defect formation during resin flow for different schemes, and the wing skin component was fabricated through the vacuum-assisted resin infusion (VARI) process. Results indicate that the infusion time predicted by PAM-RTM simulation is 3883 s, while the actual measured value in the VARI process is 3611 s with an error of approximately 7% within a reasonable range. Both simulation and actual wing skin fabrication exhibited no significant defects, validating the accuracy of the three-dimensional permeability measurement of dry fiber preforms as well as the reliability of the simulation results.

1 March 2024 in Materials Research Express
Verified
Journal Article
Open access
JLJun Liu
Jun Liu
ZLZhefu Li
Zhefu Li
GYGuangquan Yue
Guangquan Yue
WLWeiping Liu
Weiping Liu
ZCZitong Cheng
Zitong Cheng
In the hot-stamp molding and hot diaphragm forming processes of composites, pressure significantly influences shaping quality. This study establishes a novel parallel fractional-order viscoelastic (PFOV) model with two Scott-Blair elements, achieving remarkable accuracy (R2 = 0.99) with fewer parameters. Unlike traditional models, it incorporates the force history of prepreg, providing a more precise representation of its mechanical response. Comparative analysis against established models underscores its superior ability to capture intricate stress relaxation behaviors. Notably, the model’s reduced parameters enhance its physical interpretability, offering a significant advantage in simulating and predicting prepreg material compression behavior for diverse manufacturing processes.