In the present work, the adsorption behavior of Eriochrome Black T (EBT) on waste hemp activated carbon (WHAC) was examined. The surface of the WHAC was modified by H3PO4 acid treatment. The surface and structural characterization of the adsorbents was carried out using Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) analysis. The effect of influential adsorption parameters (pH, contact time, dosage, and initial concentration) on the adsorption of EBT onto WHAC was examined in batch experiments; some adsorption parameters such as pH, concentration and dose were improved by new mathematical models. The adsorption behavior of EBT on the surfaces of WHAC was evaluated by applying different isotherm models (Langmuir, Freundlich, Temkin and Dubinin–Radushkevich) to equilibrium data. The adsorption kinetics was studied by using pseudo-first-order, pseudo-second-order, Elovich and intraparticle models on the model. Adsorption followed the pseudo-second-order rate kinetics. The maximum removal of EBT was found to be 44–62.08% by WHAC at pH = 7, adsorbent dose of 10–70 mg, contact time of 3 h and initial dye concentration of 10 mg.L−1. The maximum adsorption capacities were 14.025 mg.g−1 obtained by calculating according to the Langmuir model, while the maximum removal efficiency was obtained at 70 mg equal to 62.08% for the WHAC. The adsorption process is physical in the monolayer and multilayer.
Activated carbons from argan nutshells were prepared by chemical activation using phosphoric acid H3PO4. This material was characterized by thermogravimetric analysis, infrared spectrometry, and the Brunauer–Emmett–Teller method. The adsorption of two emerging compounds, a stimulant caffeine and an anti-inflammatory drug diclofenac, from distilled water through batch and dynamic tests was investigated. Batch mode experiments were conducted to assess the capacity of adsorption of caffeine and diclofenac from an aqueous solution using the carbon above. Adsorption tests showed that the equilibrium time is 60 and 90 min for diclofenac and caffeine, respectively. The adsorption of diclofenac and caffeine on activated carbon from argan nutshells is described by a pseudo-second-order kinetic model. The highest adsorption capacity determined by the mathematical model of Langmuir is about 126 mg/g for diclofenac and 210 mg/g for caffeine. The thermodynamic parameters attached to the studied absorbent/adsorbate system indicate that the adsorption process is spontaneous and exothermic for diclofenac and endothermic for caffeine.
Phenol red (X-PR) and malachite green carbinol (MGC) are two textile finishing dyes, which are present in aquatic environments through industrial effluents. Due to the toxic nature of both dyes, they are harmful to human health. In the present study, two materials, barley seeds and the biochar of barley (Hordeum vulgare L.), were used to remove the dyes in an aqueous solution. The materials used are characterized by AFM, FTIR, SEM, XRD and EDX techniques. In this study, the parameters studied are the adsorbent dose, pH, initial adsorbate concentration and contact time. The maximum equilibrium time was found to be 90 min for all dyes. Kinetic studies revealed that the adsorption of X-PR and MGC on barley seeds (BS-HVL) and the biochar of barley (BC-HVL) followed pseudo-second-order kinetics and that both porous and intraparticle diffusion mechanisms were involved. The adsorption equilibrium data were well fitted to the Langmuir and Freundlich isotherm model for both materials, and the maximum adsorption capacity of monolayer and multilayers for X-PR and MGC were 71.642 mg g−1 and 50 mg g−1 on BS-HVL, and 44.843 mg g−1 and 121.95 mg g−1 on BC-HVL, respectively. The thermodynamic results reveal that the dye removal on barley was endothermic and spontaneous in nature.
The Markov models and stochastic Petri nets have demonstrated their capabilities for the concrete analysis of reliability in many industrial processes. However,