A SWIFTS device (Stationary Wave Integrated Fourier Transform Spectrometer) has been realized with an array of 24 Superconducting Nanowire Single Photon Detectors (SNSPD), on-chip integrated under a Si3N4 monomode rib-waveguide interferometer. Colored light around 1.55μm wavelength is introduced through end-fire coupling, producing a counter-propagative stationary interferogram over the 40nm wide, 120nm spaced, 4nm thick epi-NbN nanowire array. Modulations in the source bandwidth have been detected using individual waveguide coupled SNSPDs operating in single photon counting mode, which is a step towards light spectrum reconstruction by inverse Fourier transform of the stationary wave intensity. We report the design, fabrication process and in-situ measurement at 4.2K of light power modulation in the interferometer, obtained with variable laser wavelength. Such micro-SWIFTS configuration with 160nm sampling period over 3.84μm distance allows a spectral bandwidth of 2μm and a wavelength resolution of 170nm. The light interferences direct sampling ability is unique and raises wide interest with several potential applications like fringe-tracking, metrology, cryptography or optical tomography.
In the last years, several numerical methods have been studied and applied to the analysis of high index contrast bent waveguides. Very often, the problem is treated using a conformal mapping, which translates the bending into an equivalent graded index profile and a straight waveguide. In this article, we discuss the implementation of a full vectorial 2D mode solver by means of the Aperiodic Fourier Modal Method, developed directly in cylindrical coordinates. This does not require the conformal mapping technique. In the first part of our work, we develop a shorthand notation and the mathematical rules useful to describe the problem in a matrix form. The calculation of propagation modes is then reconducted to the search of eigenvectors of a matrix. We will at first confront our formulation in 1D with results described in the literature. In a second time, we will use the complete 2D solver to determine the resonance frequencies and the quality factors of micro-ring resonators made on silicon surrounded by silica. These characteristics are indeed related to the real and imaginary parts of the propagation constants. By comparison with 3D-FDTD analysis, we will show that our implementation can be used to accurately describe the behavior of micro-rings having a bending radius as low as 1.1 μm in the near infrared region. This technique is general and can be applied to any micro-ring having an arbitrary cross-section and a quality factor which is less than 10000. Perspectives of this work include the study of the field propagation in a bent structure, as well as the coupling between micro-ring resonators and straight waveguides.
The stationary wave integrated Fourier transform spectrometer (SWIFTS) is based on the sampling of a stationary wave using nano-scattering centers on the surface of a channel waveguide. Single nano-scale scattering centers above the waveguide surface will radiate the sampled signal with wide angular distribution, which is not compatible with the buried detection area of infrared (IR) detectors, resulting in crosstalk between pixels. An implementation of multiple diffraction nano-grooves (antenna) for each sampling center is proposed as an alternative solution to improve directivity towards the detector pixel by narrowing the scattering angle of the extracted light. Its efficiency is demonstrated from both simulated and measured far-field radiative patterns exhibiting a promising method to be used for the future integrated IR-SWIFTS.
Direct ultrafast laser photoinscription of transparent materials is a powerful technique for the development of embedded 3D photonics. This is particularly adaptable for astrophotonic devices when a number of inputs are required. The process relies essentially on volume fabrication of waveguiding structures in flexible 3D designs and refractive index contrast parameters adjustable for specific spectral ranges. This enables 3D geometry and thus avoids in-plane crossings of waveguides that can induce losses and cross talk in multi-telescope beam combiners. The additional novel capability of the technique allows for the fabrication of high aspect ratio nanostructures nonperturbatively sampling the optical field. Combining ultrafast laser micro- and nanoprocessing with engineered beams, we present here results for the development of chip-sized silica glass integrated robust 3D three-telescope beam combiners in the near-IR range, as well as embedded diffraction gratings, for phase closure analysis and spectro-interferometry applications in astronomy.
A buried straight waveguide perturbed periodically by six antennas composed of submicronic cylinder voids is entirely fabricated using ultrafast laser photoinscription. The light scattered from each antenna is oriented vertically and is detected by a short-wave IR camera bonded to the surface of the glass with no relay optics. The response of each antenna is analyzed using a wavelength tunable laser source and compared to simulated responses verifying the behavior of the antenna. These results show the good potential of the direct laser writing technique to realize monolithic embedded detectors by combining complex optical functions within a 3D design. A wavelength meter application with a spectral resolution of 150 pm is proposed to demonstrate this combination.
Integrated optics technologies are an attractive alternative to classical bulk optics for the beam combination function of an interferometer. We propose a new integrated optics combiner for three apertures giving access to the closure phase on each output. It uses a multimode interference combination scheme realized by ion exchange on a glass substrate. This paper describes the theoretical behaviour of the beam combiner and its design constraints. Its interferometric behaviour is simulated and first experimental results using for the first time, as far as we know, a Near field Scanning Optical Measurement (NSOM) technique are discussed.