Guodong Zhang

Prof. Guodong Zhang


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 June 2019 in Photonics Research
Verified
Journal Article
Open access
PDF file
GZGuodong Zhang
Guodong Zhang
GCGuanghua Cheng
Guanghua Cheng
MBManoj K. Bhuyan
Manoj K. Bhuyan
CDCiro D'Amico
Ciro D'Amico
YWYishan Wang
Yishan Wang
RSRazvan Stoian
Razvan Stoian
Ultrashort pulsed Bessel beams with intrinsic nondiffractive character and potential strong excitation confinement down to 100 nm can show a series of advantages over Gaussian beams in fabricating efficient Bragg grating waveguides (BGWs). In this work, we focus on parameter management for the inscription of efficient BGWs using the point-by-point method employing Bessel beams. Due to their high aspect ratio, the resulting one-dimensional void-like structures can section the waveguides and interact efficiently with the optical modes. Effective first-order BGWs with low birefringence can then be fabricated in bulk fused silica. By controlling the size and the relative location of grating voids via the Bessel pulse energy and scan velocities, the resonant behaviors of BGWs can be well regulated. A high value of 34 dB for 8 mm length is achieved. A simple predictive model for BGWs is proposed for analyzing the influences of processing parameters on the performance of BGWs. The technique permits multiplexing several gratings in the same waveguide. Up to eight grating traces were straightforwardly inscribed into the waveguide in a parallel-serial combined mode, forming the multiplex BGWs. As an application, the multiplex BGW sensor with two resonant peaks is proposed and fabricated for improving the reliability of temperature detection.

27 April 2018 in Optics Letters
Verified
Journal Article
Closed access
PDF file
GZGuodong Zhang
Guodong Zhang
GCGuanghua Cheng
Guanghua Cheng
MBM. Bhuyan
M. Bhuyan
CDC. D’amico
C. D’amico
RSRazvan Stoian
Razvan Stoian
We demonstrate highly efficient Bragg gratings written point-by-point by sequential single-pulse ultrashort Bessel laser beams in laser photoinscribed single-mode waveguides in bulk fused silica. The use of chirped non-diffractive Bessel beams determines a strong Bragg resonance in a weak-to-strong transitional regime, augmenting to a record value of 40 dB/cm at 1550 nm in the third order. The Bessel-induced refractive index modulation is negative and localized to sub-micrometer (200 nm) transverse scales. The strong light confinement in Bessel beams ensuring uniform one-dimensional void conditions thus allows for enhanced precision in the Bragg grating waveguide design. We demonstrate flexible fabrication of multiplexed waveguide gratings for multiple and tunable spectral resonances.

10 July 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
TCTianqu Chen
Tianqu Chen
GZGuodong Zhang
Guodong Zhang
YWYishan Wang
Yishan Wang
XLXuelong Li
Xuelong Li
RSRazvan Stoian
Razvan Stoian
GCGuanghua Cheng
Guanghua Cheng
Ultrafast non-diffractive Bessel laser beams provide strong light confinement and show robust advantages for fabricating high-aspect-ratio nanoscale structures inside transparent materials. They take the form of nanoscale voids with typical diameters well below the wavelength and aspect ratio of more than 1000. Delivering 3D morphologies of such nanoscale voids is an important issue to evaluate the result for fabrication. However, the characterization of such laser-induced structures is a difficult task. Here, an accurate and time-saving tomography-like methodology is proposed and adopted for reconstructing the morphology of high-aspect-ratio nano-holes. The technique allows an accurate assertion of laser parameters and position on nano-structured features. The reconstructed configuration reveals that nanoholes morphologies have a close relationship with energy distribution in the focal region. It suggests that the configuration of micro-explosion can be controlled by laser energy deposition in the process of laser-matter interaction down to the nanoscale.

30 November 2020 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JWjiang Wang
jiang Wang
YWYonggang Wang
Yonggang Wang
SLSicong Liu
Sicong Liu
GLGuangying Li
Guangying Li
GZGuodong Zhang
Guodong Zhang
GCGuanghua Cheng
Guanghua Cheng
Molybdenum carbide (Mo2C) is a two-dimensional (2D) MXene material which makes it a promising photoelectric material. In this study, reflective type MXene Mo2C thin films were coated on a silver mirror by a magnetron sputtering method and were subsequently used in a passively Q-switched solid-state pulsed laser generator at the central wavelengths of 1.06 and 1.34 μm, respectively. The fabricated thin films of reflective type MXene Mo2C exhibited large modulation depth of 6.86% and 5.38% at the central wavelengths of 1064 and 1342 nm, respectively. By inserting the Mo2C saturable absorbers (SAs) into V-shaped Nd:YAG laser, short pulses were generated having a pulse duration, pulse energy, and average output power of 254 ns, 2.96 μJ, and 275 mW, respectively, at a wavelength of 1.06 μm. Similarly, shorter laser pulses were obtained in Nd:YVO4 laser at 1.34 μm. Our results illustrated potential of the 2D MXene Mo2C films for laser applications.

5 January 2023 in ACS Applied Materials & Interfaces
Verified
Journal Article
Closed access
JWjiang Wang
jiang Wang
GLGuangying Li
Guangying Li
SLSicong Liu
Sicong Liu
JCJun-Shuai Chai
Jun-Shuai Chai
YWYonggang Wang
Yonggang Wang
XLXuelong Li
Xuelong Li

1 January 2025 in Ultrafast Science
Verified
Journal Article
Closed access
GZGuodong Zhang
Guodong Zhang
ARAnton Rudenko
Anton Rudenko
RSRazvan Stoian
Razvan Stoian
GCGuanghua Cheng
Guanghua Cheng
The ultimate feature size is key in ultrafast laser material processing. A capacity to substantially exceed optical limits and to structure below 100 nm is essential to advance ultrafast processing into the field of metamaterials. Such achievement requires combining the control of optical near-fields and of material reactions while preserving the flexibility of long working distances, compatible with a mature laser process. Using subpicosecond and picosecond nondiffractive Bessel beams, we demonstrate unprecedented feature sizes below a hundredth of the incident 1-μm wavelength over an extended focus depth of tens of micrometers. Record features sizes, down to 7 nm, result from self-generated near-field light components initiated by cavities induced by far-field radiation in a back-surface illumination geometry. This sustains the generation of more confined near-field evanescent components along the laser scan with a nanometer pitch, perpendicular to the incident field direction, driving a superresolved laser structuring process via local thermal ablation. The near-field pattern is replicated with high robustness, advancing toward a 10-nm nanoscribing tool with a micrometer-sized laser pen. The process is controllable by the field orientation. The nondiffractive irradiation develops evanescent fields over the focusing length, resulting in high-aspect-ratio trenching with a nanometer section and a micrometer depth. Higher energy doses trigger the self-organization of quasi-periodic patterns seeded by spatially modulated scattering, similarly to optical modelocking. A predictive multipulse simulation method validates the far-field-induced near-field electromagnetic scenario of void nanochannel growth and replication, indicating the processing range and resolution on the surface and in the depth.