This study aimed to investigate the effects of different magnitudes and durations of static tensile strain on human periodontal ligament cells (hPDLCs), focusing on osteogenesis, mechanosensing and inflammation. Static tensile strain magnitudes of 0%, 3%, 6%, 10%, 15% and 20% were applied to hPDLCs for 1, 2 and 3 days. Cell viability was confirmed via live/dead cell staining. Reference genes were tested by reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR) and assessed. The expressions of TNFRSF11B, ALPL, RUNX2, BGLAP, SP7, FOS, IL6, PTGS2, TNF, IL1B, IL8, IL10 and PGE2 were analyzed by RT-qPCR and/or enzyme-linked immunosorbent assay (ELISA). ALPL and RUNX2 both peaked after 1 day, reaching their maximum at 3%, whereas BGLAP peaked after 3 days with its maximum at 10%. SP7 peaked after 1 day at 6%, 10% and 15%. FOS peaked after 3 days with its maximum at 3%, 6% and 15%. The expressions of IL6 and PTGS2 both peaked after 1 day, with their minimum at 10%. PGE2 peaked after 1 day (maximum at 20%). The ELISA of IL6 peaked after 3 days, with the minimum at 10%. In summary, the lower magnitudes promoted osteogenesis and caused less inflammation, while the higher magnitudes inhibited osteogenesis and enhanced inflammation. Among all magnitudes, 10% generally caused a lower level of inflammation with a higher level of osteogenesis.

The German Centre for Cardiovascular Research (DZHK) is one of the German Centres for Health Research and aims to conduct early and guideline-relevant studies to develop new therapies and diagnostics that impact the lives of people with cardiovascular disease. Therefore, DZHK members designed a collaboratively organised and integrated research platform connecting all sites and partners. The overarching objectives of the research platform are the standardisation of prospective data and biological sample collections among all studies and the development of a sustainable centrally standardised storage in compliance with general legal regulations and the FAIR principles. The main elements of the DZHK infrastructure are web-based and central units for data management, LIMS, IDMS, and transfer office, embedded in a framework consisting of the DZHK Use and Access Policy, and the Ethics and Data Protection Concept. This framework is characterised by a modular design allowing a high standardisation across all studies. For studies that require even tighter criteria additional quality levels are defined. In addition, the Public Open Data strategy is an important focus of DZHK. The DZHK operates as one legal entity holding all rights of data and biological sample usage, according to the DZHK Use and Access Policy. All DZHK studies collect a basic set of data and biosamples, accompanied by specific clinical and imaging data and biobanking. The DZHK infrastructure was constructed by scientists with the focus on the needs of scientists conducting clinical studies. Through this, the DZHK enables the interdisciplinary and multiple use of data and biological samples by scientists inside and outside the DZHK. So far, 27 DZHK studies recruited well over 11,200 participants suffering from major cardiovascular disorders such as myocardial infarction or heart failure. Currently, data and samples of five DZHK studies of the DZHK Heart Bank can be applied for.

Aim of this study was to determine the forces and moments during simulated initial orthodontic tooth movements using a novel biomechanical test setup. The test setup consisted of an industrial precision robot with a force-torque sensor, a maxillary model and a control computer and software. Forces and moments acting on the corresponding experimental tooth during the motion simulations were dynamically measured for two 0.016" NiTi round archwires (Sentalloy Light/Sentalloy Medium). Intrusive (#1), rotational (#2) and angular (#3) tooth movements were simulated by a control program based on the principle of force control and executed by the robot. The results were statistically analysed using K-S-test and Mann-Whitney U test with a significance level of α = 5%. Sentalloy Medium archwires generated higher forces and moments than the Sentalloy Light archwires in all simulations. In simulation #1 the mean initial forces/moments reached 1.442 N/6.781 Nmm for the Light archwires and 1.637 N/9.609 Nmm for the Medium archwires. In movement #2 Light archwires generated mean initial forces/moments of 0.302 N/-8.271 Nmm whereas Medium archwires generated 0.432 N/-9.653 Nmm. Simulation #3 showed mean initial forces/moments of -0.122 N/8.477 Nmm from the Light archwires compared to -0.300 N/11.486 Nmm for the Medium archwires. The measured forces and moments were suitable for initial orthodontic tooth movement in simulations #2 and #3, however inadequate in simulation #1. Reduced archwire dimensions (<0.016″) should be selected for initial leveling of vertical malocclusions.

Objective: The amount of apical root resorption when using the torque-segmented archwire (TSA) was investigated as well as the extent and direction of the therapeutically indicated apical movement and the treatment duration. Materials and methods: The degree of apical root resorption in 18 randomly chosen Class II and Class I patients treated with the TSA, as well as in 18 conventionally treated patients were evaluated using pre- and posttreatment panoramic radiographs. The sagittal and vertical apical movements and inclination changes were determined based on pre- and posttreatment lateral cephalograms. Nonparametric tests were applied to test between treatment groups and steps. The Mann–Whitney U test, Kruskal–Wallis, Pearson correlation and Wilcoxon signed-rank test were applied for statistical analysis (p < 0.05). Results: The incidence of root resorptions was 89–94.4% in low or moderate level. The relative root–crown ratio (rRCR) was not statistically different between the TSA and control groups except tooth 12. The axis of the incisors in the TSA group was significantly improved. The main direction of movement of the apices of the central incisors was retrusion and extrusion. No interdependence between the amount of resorption and the parameters of treatment duration, extent and direction of apical movement were found. Conclusion: The results of the study showed that the amount of apical root resorption with the TSA is slight to moderate and can be compared to conventional orthodontic treatment. The TSA is hence a suitable method for applying targeted torques to the incisors.

The purpose was to determine the effect of different environments (artificial saliva, human saliva, distilled water, dry storage) on frictional forces between various tribological systems made from self-ligating brackets in combination with stainless-steel wires (dimensions: 0.016″×0.022″, 0.018″×0.025″ and 0.019″×0.025″). An universal testing-machine applied a normal force of 1 N. Two-way ANOVA and Tukey post-hoc tests (α=5%) were used. Saliva had significantly higher frictional forces (p<0.001). Yet, the influence of the media depends on the wire dimensions. The results were not as straightforward as in 0.018″×0.025″, which had a clear order (dry storage<water<artificial saliva<human saliva, p<0.001 each). Except for human saliva, wire dimensions differed significantly from each other (p<0.001). Increasing wire cross-sections increases frictional force. Thus, saliva acts as adhesive. High frictional forces of larger wires are attributed to the contact between latch and wire. Still, in-vitro experiments can only approximate the quasi-static tooth movement and the various fluids in the mouth.

The aim of this study was the investigation of polymeric coverings to adjust frictional forces between V-shaped wires and brackets, both made of superelastic NiTi. Adjustment of frictional forces is relevant for certain stages during orthodontic therapy. Coverings able to generate frictional forces when assembled to such brackets are additively manufactured. Six different internal widths of coverings were examined in three different environments: dry condition at room temperature (RT) or body temperature (BT), or artificial saliva (AS) at RT. The different coverings significantly affected the frictional forces for all media (p < 0.001). A correlation between internal width of the covering and resulting frictional forces was found. BT and dry environment showed the lowest friction forces for all samples. The highest force was found for two covering types at RT in AS, while the remaining four covering types showed the highest values in dry environment (p < 0.001). Friction could, therefore, be adjusted by variation of bracket covering clipped onto brackets, which is useful for orthodontic therapy. Coverings delivering higher friction provide dental anchorage, while coverings with lower friction can be used for tooth movement or purely esthetic reasons. It was shown that the variation of covering width may be used for adjustment of frictional forces.