The main aim of our research was to investigate antiadhesive and antibiofilm properties of nanocrystalline apatites doped and co-doped with noble metal ions (Ag⁺, Au⁺, and Pd²⁺) against selected drug-resistant strains of Enterococcus faecalis and Staphylococcus aureus. The materials with the structure of apatite (hydroxyapatite, nHAp; hydroxy-chlor-apatites, OH-Cl-Ap) containing 1 mol% and 2 mol% of dopants and co-dopants were successfully obtained by the wet chemistry method. The majority of them contained an additional phase of metallic nanoparticles, in particular, AuNPs and PdNPs, which was confirmed by the XRPD, FTIR, UV–Vis, and SEM–EDS techniques. Extensive microbiological tests of the nanoapatites were carried out determining their MIC, MBC value, and FICI. The antiadhesive and antibiofilm properties of the tested nanoapatites were determined in detail with the use of fluorescence microscopy and computer image analysis. The results showed that almost all tested nanoapatites strongly inhibit adhesion and biofilm production of the tested bacterial strains. Biomaterials have not shown any significant cytotoxic effect on fibroblasts and even increased their survival when co-incubated with bacterial biofilms. Performed analyses confirmed that the nanoapatites doped and co-doped with noble metal ions are safe and excellent antiadhesive and antibiofilm biomaterials with potential use in the future in medical sectors.

The aim of this research was to investigate the photothermal ability of nanocrystalline hydroxyapatite (nHAp) incorporated with silver and gold. It was studied by using a recently developed technique evaluating the photothermal conversion efficiency. The heating performance of aqueous dispersions was examined under 445 and 532 nm excitation. The largest increase in temperature was found for the 2% Ag-nHAp and reached above 2 °C per mg/mL of sample (445 nm) under 90 mW laser continuous irradiation and an external light-to-heat conversion efficiency of 0.11 L/g cm. The obtained results have shown a new functionality of nanosized apatites that has not been considered before. The studied materials have also been characterized by XRPD, TEM, BET, and UV-Vis techniques. Finally, in this work, a new idea for their application was proposed: photothermal therapy.

Background: Alveolar bone augmentation is a complex process influenced by a multitude of factors. The materials applied in augmentation procedures must be confirmed as non-toxic, and their physicochemical properties should allow proper bone reconstruction. The specifics of oral surgical procedures require the use of regenerative biomaterials with antimicrobial properties. This study focuses on the physicochemical characteristics of chosen nanosized biomaterials, as well as their cytotoxicity and antimicrobial properties. Methods: nanosized hydroxyapatite and fluorapatite (abbreviated as nHAp and nFAp) pellets were manufactured using a microwave hydrothermal synthesis method. The impact on Candida albicans, Streptococcus mutans, and Lactobacillus rhamnosus strains activity and adherence to apatites was tested. Cytotoxic evaluation was performed based on the differentiation process of MC3T3 cells. The effectiveness of MC3T3 differentiation was confirmed by Alizarin Red staining. Results: Contact with both biomaterials caused a reduction in the mean microbial count of S. mutans and C. albicans strains, as observed. Studied biomaterials demonstrated enhanced proliferation of MC3T3 cells, with the exception of the 1:1 nFAp concentration. Conclusions: Both biomaterials enhance the proliferation of fibroblasts and limit the activity of specific oral pathogens in vitro. The research clearly demonstrates the advantage of nFAp over nHAp, with a notable reduction in microbial count of Candida albicans and Streptococcus mutans over time. The lowest microbial count reduction was observed in the case of L. rhamnosus. Further research is required in order to fully understand the specifics of nHAp and nFAp antimicrobial action. However, the results were found to be more favourable for nFAp biomaterial.

The most common methods of reducing mercury emissions are the use of fixed bed granular sorbents and sorbent injection. However, both of these methods have disadvantages, such as increasing the flow resistance or the need to remove the sorbent from flue gas, respectively. These disadvantages can be eliminated by using sorbents permanently bound to construction materials (fixed sorbent materials—FSMs) or mixed with construction materials (sorbent polymer composites—SPCs). The approach is unique in the world literature as well as the development of three stands and procedures enabling the testing of FSMs or SPC materials based on Tarflen as a construction material. In order to further tests of FSMs and SPCs, the system for laboratory tests and two systems for industrial tests are developed. These stands and procedures enable determination of the influence of: FSM or SPC module shapes, flue gas properties (e.g., composition, temperature, flow rate), and mercury concentration on the effectiveness of mercury removal by SPCs and FSMs. In this paper, the influence of module shapes, gas velocity, and temperature is particularly considered. In the final industrial tests, the FSM removes 99.5% Hg after 42 days and the SPC removes from 99.5% to 82.3% after 34 days.