Lecture attendance data at universities is a reference in showing the credibility of each student used by lecturers as data for student grades as well as an evaluation material for the success of teaching and learning activities in lectures, but there are several examples of cases related to student attendance data currently prevalent in the world of education or lectures is the phenomenon of "Leave Absence" or better known as TA. In addition, other problems also arise from lecturers and administrative staff, namely difficulties in monitoring student attendance and efforts to validate attendance data because of the large amount of student data. Therefore in this study a system was proposed to reduce the level of fraud in filling the attendance list and effectiveness of student data processing using a system of applying the concept of the Internet of Things (IoT) with the fingerprint presence method. Existing system modeling results are expected to be able to support the service of processing academic data automatically and produce accurate and accurate statistical data and be able to reduce data manipulation factors from irresponsible parties.

This paper describes the development of smart campus using Internet of Things (IoT) technology. Through smart campus, it is possible that a campus is connected via online by the outside entity, so that the teaching approach based on technology can be conducted in real time. This research was conducted in smart education, smart parking and smart room. Observation and literature studies were applied as the research method with the related theme for the sake of system design of smart campus. The result of this research is the design of smart campus system that includes smart education development, smart parking and smart room with the sake of Universitas PGRI Yogyakarta as the case study.

The advancement in sustainable construction has stimulated wide-ranging investigation of construction materials and practices globally. With exceptional thermal properties, fire resistance performance, excellent strength, and outstanding durability, concrete is the utmost extensively utilized construction material around the world. Taking into consideration the quantity of concrete necessary for numerous constructions works, improving concrete sustainability would be an extremely attractive potential. Lightweight foamed concrete (LFC) is tremendously permeable, and its mechanical properties weaken with a growth in the volume of voids. Air-void segregation from solid cement phases by means of aging, drainage, and merging of voids can trigger and reduce the stability and consistency of the emitted pores, making the LFC less reliable for main utilization in load-bearing components and structural elements. In turn, to augment LFC mechanical properties, the LFC cementitious matrix can be adjusted by adding various nanoparticles. The influence of magnetite nanoparticles (MNP) in LFC was not examined in the past; hence, there is some vagueness considering the mechanism to which level the MNP can affect the LFC mechanical properties. Thus, the aim of this study is to investigate the influences of MNP on the compressive, splitting tensile, and flexural LFC of 1000 kg/m³ density. Six MNP weight fractions of 0.10%, 0.15%, 0.20%, 0.25%, 0.30%, and 0.35% were considered. The parameters accessed were compressive, splitting tensile and flexural strengths. The correlation between strength parameters was established as well. The results indicated that a 0.25% weight fraction of MNP gave the best performance in terms of compressive, flexural, and splitting tensile strengths. The presence of MNP in the LFC matrix enhances the viscosity and yield stress of the mixture as well as an augmented utilization of LFC cementitious binder content, which can sustain the integrity of the wet networks hence preventing further amalgamation and aging of the voids.

Measuring Enterprise Resource Planning (ERP) Systems Effectiveness in Indonesia

Malaysia, like most other developing countries, is facing an increase in the generation of waste and accompanying problems with the disposal of this waste. A large number of biomass wastes were generated due to increased activity in the agricultural and agro-industrial sectors, which led to producing environmental hazards and waste management issues. On the other situation, the energy consumption to cool the indoor building environment is high due to the building being exposed directly to solar radiation throughout the daytime, which increases the temperature outside and inside the building. Most of the low-medium cost housing schemes were constructed using metal roof covering without providing a roof insulation layer which causes a rising in indoor temperature and creates uncomfortable surroundings. Moreover, existing materials for roof insulation in the market use inorganic synthetic materials that could harm human health. The study aims to investigate the potential use of agricultural wastes for the production of roof board insulation material that can provide economic value added to agricultural waste, reduce the environmental issue and provide eco-friendly, sustainable building material. In this study, these agricultural wastes are combined in different proportions of 50% individual fibres, such as sugarcane bagasse with coconut husk, empty fruit bunch with mesocarp fibre, coconut husk with empty fruit bunch, and sugarcane bagasse with mesocarp fibre. The sample was fabricated using the hot-press machine and went through various physical and mechanical testing, which involved thickness of swelling, modulus of rupture, and thermal conductivity. The finding showed that the mixed fibre of empty fruit bunch and mesocarp fibre achieved all the criteria such as density (427 <500kg/m3); thickness of swelling (19< 20%); modulus of rupture (514<800psi), thermal conductivity (0.0856<0.25 W/m.K) met with the standard requirement in every laboratory test conducted. The outcome of this study suggests that empty fruit bunch and mesocarp fibre are the potential materials for the production of roof board thermal insulation. However, modification of physical and mechanical properties of waste fibre is required to achieve superior performance and is ready to be provided in the market. This study is aligned with the government initiative for the growth of green building materials for sustainable development in the construction industry.