Daniel Dodzi yao Setsoafia

Mr. Daniel Dodzi yao Setsoafia


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 October 2023 in International Journal of Energy Research
Verified
Journal Article
Open access
PDF file
DSDaniel Dodzi yao Setsoafia
Daniel Dodzi yao Setsoafia
KIRAN SREEDHAR RAMKIRAN SREEDHAR RAM
KIRAN SREEDHAR RAM
Hooman RadHooman Rad
Hooman Rad
David OmpongDavid Ompong
David Ompong
Jai SinghJai Singh
Jai Singh
Using the density functional theory (DFT), the influence of substitution of electron-donating (OCH3 and OH) and electron-accepting (F and Cl) groups on the peripheral thiophene units of DRTB-T donor molecule is studied. By optimizing the geometric structure, HOMO and LUMO energies, reorganization energies, optical properties, and photovoltaic properties are simulated. It is found that the ionization potential of the electron-donating derivatives (DRTB-4OCH3 and DRTB-4OH) reduces, but it increases for the electron-accepting derivatives (DRTB-4F and DRTB-4Cl) in comparison with that of DRTB-T. It is also found that the absorption spectra of the electron-donating derivatives (DRTB-4OCH3 and DRTB-4OH) get redshifted, but these get blue shifted for the electron-accepting derivatives (DRTB-4F and DRTB-4Cl) in comparison with those of DRTB-T. These changes in the electronic and optical properties of the modified structures result in higher PCE in BHJ OSCs with the blended active layer of DRTB-4F: NITI, DRTB-4Cl: NITI, in comparison with that of OSC with the active layer of DRTB-T: NITI and the highest being 15.0 in DRTB-4Cl: NITI. Our results may be expected to provide valuable insights into design optimization, leading to the fabrication of more efficient OSCs.

8 January 2024 in Energies
Verified
Journal Article
Open access
PDF file
DSDaniel Dodzi yao Setsoafia
Daniel Dodzi yao Setsoafia
KIRAN SREEDHAR RAMKIRAN SREEDHAR RAM
KIRAN SREEDHAR RAM
Hooman RadHooman Rad
Hooman Rad
David OmpongDavid Ompong
David Ompong
Jai SinghJai Singh
Jai Singh
We have simulated the effect of changing the end groups in BTP core with five organic units of 1,3-Indandione (IN), 2-thioxothiazolidin-4-one (Rhodanine), propanedinitrile (Malononitrile), (2-(6-oxo-5,6-dihydro-4H-cyclopenta[c]thiophen-4-ylidene)malononitrile) (CPTCN) and 2-(3-oxo-2,3-dihydroinden-1-ylidene (IC), and two halogenated units of (4F) IC and (4Cl) IC on the optical and photovoltaic properties of the BTP DA’D core molecular unit. Thus modified, seven molecular structures are considered and their optical properties, including HOMO and LUMO energies and absorption spectra are simulated in this paper. On the basis of HOMO and LUMO energies, it is found that two of the seven molecules, BTP-IN and BTP-Rhodanine, can act as donors and the other four, BTP-(4F) IC, BTP-(4Cl) IC, BTP-CPTCN and BTP-IC, as acceptors in designing bulk heterojunction (BHJ) organic solar cells (OSCs). Using these combinations of donors and acceptors in the active layer, eight BHJ OSCs, such as BTP-IN: BTP-(4F) IC, BTP-IN: BTP-(4Cl) IC, BTP-IN: BTP-CPTCN, BTP-IN: BTP-IC, BTP-Rhodanine: BTP-(4F) IC, BTP-Rhodanine: BTP-(4Cl) IC, BTP-Rhodanine: BTP-CPTCN and BTP-Rhodanine: BTP-IC, are designed, and their photovoltaic performance is simulated. The photovoltaic parameters Jsc, Voc and FF for all eight BHJ OSCs and their power conversion efficiency (PCE) are simulated. It is found that the BHJ OSC of the BTP-IN: BTP-CPTCN donor–acceptor blend gives the highest PCE (14.73%) and that of BTP-Rhodanine: BTP-(4F) IC gives the lowest PCE (12.07%). These results offer promising prospects for the fabrication of high-efficiency BHJ OSCs with the blend of both donor and acceptor based on the same core structure.

27 January 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Hooman RadHooman Rad
Hooman Rad
KIRAN SREEDHAR RAMKIRAN SREEDHAR RAM
KIRAN SREEDHAR RAM
FMFarhad Mehdizadeh-Rad
Farhad Mehdizadeh-Rad
David OmpongDavid Ompong
David Ompong
DSDaniel Dodzi yao Setsoafia
Daniel Dodzi yao Setsoafia
Jai SinghJai Singh
Jai Singh
Thermal stability, closely associated with the operating temperature, is one of the desired properties for practical applications of organic solar cells (OSCs). In this paper, an OSC of the structure of ITO/PEDOT:PSS/P3HT:PCBM/ZnO/Ag was fabricated, and its current-voltage (J-V) characteristics and operating temperature were measured. The operating temperature of the same OSC was simulated using an analytical model, taking into consideration the heat transfer, charge carrier drift-diffusion and different thermal generation processes. The simulated results agreed well with the experimental ones. It was found that the thermalization of charge carriers above the band gap had the highest influence on the operating temperature of the OSCs. The energy off-set at the donor/acceptor interface in the bulk heterojunction (BHJ) was shown to have a negligible impact on the thermal stability of the OSCs. However, the energy off-sets at the electrode/charge-transporting layer and BHJ/charge-transporting layer interfaces had greater impacts on the operating temperature of OSCs at the short circuit current and maximum power point conditions. Our results revealed that a variation over the energy off-set range from 0.1 to 0.9 eV would induce an almost 10-time increase in the corresponding thermal power generation, e.g., from 0.001 to 0.01 W, in the cells operated at the short circuit current condition, contributing to about 16.7% of the total solar power absorbed in the OSC.

19 January 2022 in Energies
Verified
Journal Article
Open access
PDF file
DSDaniel Dodzi yao Setsoafia
Daniel Dodzi yao Setsoafia
KIRAN SREEDHAR RAMKIRAN SREEDHAR RAM
KIRAN SREEDHAR RAM
Hooman RadHooman Rad
Hooman Rad
David OmpongDavid Ompong
David Ompong
NENaveen Kumar Elumalai
Naveen Kumar Elumalai
Jai SinghJai Singh
Jai Singh
Using the optical transfer matrix method, we optimized the layered structure of a conventional and an inverted BHJ OSC with the active layer made of blended PTB7-Th:PNDI-T10 by maximizing the optical absorption and, hence, the JSC. The maximum JSC thus obtained from the optimised structure of the inverted OSC was 139 Am−2 and that of the conventional OSC was 135 Am−2. Simulation of the electric field distribution in both inverted and conventional OSCs showed that the formation of a single CIP was obtained in the active layer of thickness 105 nm in both OSCs. As the light incidents from the ITO side, it was found that excitons were generated more closely to ITO electrode, which favors the efficient charge transport and collection at the opposite electrodes in the inverted OSC, which produces higher JSC.

11 September 2026 in Advanced Theory and Simulations
Verified
Journal Article
Open access
JJJunbo Jia
Junbo Jia
DSDaniel Dodzi yao Setsoafia
Daniel Dodzi yao Setsoafia
David OmpongDavid Ompong
David Ompong
Hooman RadHooman Rad
Hooman Rad
KRKiran Sreedhar Ram
Kiran Sreedhar Ram
Jai SinghJai Singh
Jai Singh
We have simulated a solar cell of lead‐free inorganic perovskite Cs 4 CuSb 2 Cl 12 of the optimized structure, FTO/WS 2 /Cs 4 CuSb 2 Cl 12 /P 3 HT/Co, which is expected to be more stable compared with solar cells containing halide perovskite. First, a few different anode, electron transport layer, and hole transport layer materials are tried, and then the above best combination is found to give the highest power conversion efficiency. Following that, the thickness of the active layer, the concentration of the defect density in the interfaces of WS 2 /Cs 4 CuSb 2 Cl 12 and Cs 4 CuSb 2 Cl 12 /P 3 HT, and in the active layer are optimized. The optimal structure of FTO/WS 2 /Cs 4 CuSb 2 Cl 12 /P 3 HT/Co thus determined reveals J SC = 23.64 mA/cm 2 , V OC = 1.44 V, FF = 84.87% and PCE = 28.97%. We have also assessed the stability of this PSC by reducing the number of interfaces, which are apparently responsible for degradation. The above PSC without both HTL and ETL reveals a lower PCE of 18.9% but may be considered more stable, and the PSC without the ETL gives a PCE of 29.3% because this structure supports better charge carrier transport. As the active layer of this PSC is inorganic, it is expected to be more stable.

27 August 2026 in Advanced Physics Research
Verified
Journal Article
Open access
PDF file
David OmpongDavid Ompong
David Ompong
MDMichael Edem Donkor
Michael Edem Donkor
EOEmmanuel Ofosu
Emmanuel Ofosu
DSDaniel Dodzi yao Setsoafia
Daniel Dodzi yao Setsoafia
Hooman RadHooman Rad
Hooman Rad
Jai SinghJai Singh
Jai Singh
Perovskite semiconductors have emerged as promising materials for nonlinear photonic, optoelectronic, and energy‐conversion applications, yet a predictive theory of two‐photon absorption (TPA) in these materials remains incomplete. The existing TPA models were primarily developed for conventional semiconductors and neglect the unique band‐structure characteristics of perovskites. In this work, we have developed an analytical model for the TPA coefficient, K 2 , in perovskite semiconductors using second‐order perturbation theory within the parabolic‐band framework, including excitonic effects. The model incorporates the inter‐ and intra‐band transitions associated with the heavy‐electron, light‐electron, and spin–orbit split‐off conduction band states. Numerical calculations performed for representative perovskite materials show good agreement between theory and experiment over a wide temperature range, including TPA coefficients at 290 and 50 K. The results highlight the importance of accounting for the band structure, excitonic and relativistic effects when analyzing TPA spectra in perovskite semiconductors and lay the foundation for the design of perovskite‐based nonlinear optical and photonic devices.