Hooman Rad

Dr. Hooman Rad

Charles Darwin University
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 March 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
AMAiman Fahd Mahmood Mohammed
Aiman Fahd Mahmood Mohammed
Muhammad Atiq Ur Rehman TariqMuhammad Atiq Ur Rehman Tariq
Muhammad Atiq Ur Rehman Tariq
Anne NgAnne Ng
Anne Ng
ZZZeeshan Zaheer
Zeeshan Zaheer
SAFWAN SADEQ MAHMOOD ALISAFWAN SADEQ MAHMOOD ALI
SAFWAN SADEQ MAHMOOD ALI
Hooman RadHooman Rad
Hooman Rad
It is estimated that almost 40% of the world’s energy is consumed by buildings’ heating, ventilation, and air conditioning systems. This consumption increases by 3% every year and will reach 70% by 2050 due to rapid urbanisation and population growth. In Darwin, building energy consumption is even higher and accounts for up to 55% due to the hot and humid weather conditions. Singapore has the same weather conditions but less energy consumption, with only 38% compared to Darwin. Solar radiation can be defined as electromagnetic radiation emitted by the Sun and the Darwin area receives a large amount of solar radiation; building energy consumption can be reduced hugely if this radiation is blocked effectively by analysing appropriate shading devices. This study investigated the influence of different types of shading devices on the cooling load of a town hall building located in Darwin, Australia, and proposed the optimal shading device. The results showed that the horizontal fins led to a 5% reduction in the cooling load of the building. In contrast, adding a variation to the device angles and length increased the savings to 8%. The results demonstrated that the overhangs were more efficient than the fins, contributing 9.2% energy savings, and the cooling reduction savings were increased to 15.5% with design and length variations.

8 March 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Punita SangwanPunita Sangwan
Punita Sangwan
Hooman RadHooman Rad
Hooman Rad
Anne NgAnne Ng
Anne Ng
Muhammad Atiq Ur Rehman TariqMuhammad Atiq Ur Rehman Tariq
Muhammad Atiq Ur Rehman Tariq
RAPHAEL CHUKWUKA NNACHIRAPHAEL CHUKWUKA NNACHI
RAPHAEL CHUKWUKA NNACHI
Tropical region such as Darwin has similar weather patterns throughout the year, thus creating higher energy demands in residential buildings. Typically, buildings consume about 40 per cent of the total energy consumption for indoor heating and cooling. Therefore, building envelopes are linked with design strategies such as the use of thermal energy storage and phase change materials (PCM) to minimize this energy consumption by storing a large amount of thermal energy. Primarily, PCMs are targeted by researchers for use in different components of buildings for thermal efficiency; thus, this study aimed to provide a suitable PCM to optimize indoor thermal comfort and minimize the cooling loads of residential buildings in tropical climates through simulation of a tropical climate building and provide optimum thickness for the selected material. Microencapsulated PCM mixed with gypsum in wallboards were used to reduce the cooling load of a building located in Darwin. The cooling load of the building was calculated using Revit software. A comparison of the cooling load of the building was carried out using PCM-incorporated wallboards of thicknesses of 0 cm, 1 cm and 2 cm in Energy Plus software. The total cooling load decreased by 1.1% when the 1-centimetre-thickness was applied to the wall, whereas a 1.5% reduction was obtained when a 2-centimetre-thick PCM layer was applied. Furthermore, the reduced cooling loads due to impregnation of the PCM-based gypsum wallboard gave reduced energy consumption. Ultimately, the 2-centimetre-thickness PCM-based gypsum wallboard gave a maximum reduction in cooling load with a 7.6% reduction in total site energy and 4.76% energy saving in USD/m2/year.

15 January 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
KIRAN SREEDHAR RAMKIRAN SREEDHAR RAM
KIRAN SREEDHAR RAM
Hooman RadHooman Rad
Hooman Rad
David OmpongDavid Ompong
David Ompong
DSDaniel Dodzi Setsoafia
Daniel Dodzi Setsoafia
Jai SinghJai Singh
Jai Singh
In this paper, characterisation of exciton generation is carried out in three bulk-heterojunction organic solar cells (BHJ OSCs)—OSC1: an inverted non-fullerene (NF) BHJ OSC; OSC2: a conventional NF BHJ OSC; and OSC3: a conventional fullerene BHJ OSC. It is found that the overlap of the regions of strong constructive interference of incident and reflected electric fields of electromagnetic waves and those of high photon absorption within the active layer depends on the active layer thickness. An optimal thickness of the active layer can thus be obtained at which this overlap is maximum. We have simulated the rates of total exciton generation and position dependent exciton generation within the active layer as a function of the thicknesses of all the layers in all three OSCs and optimised their structures. Based on our simulated results, the inverted NF BHJ OSC1 is found to have better short circuit current density which may lead to better photovoltaic performance than the other two. It is expected that the results of this paper may provide guidance in fabricating highly efficient and cost effective BHJ OSCs.

19 February 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Hooman RadHooman Rad
Hooman Rad
TCTaimoor Ahmad Choudhry
Taimoor Ahmad Choudhry
Anne NgAnne Ng
Anne Ng
Zohreh RajabiZohreh Rajabi
Zohreh Rajabi
MRMuhammad Farooq Rais
Muhammad Farooq Rais
Muhammad Atiq Ur Rehman TariqMuhammad Atiq Ur Rehman Tariq
Muhammad Atiq Ur Rehman Tariq
A total of 40% of the world’s energy produced is utilized to maintain thermal comfort for the occupants of the building. Governments are taking measures collectively to regulate energy efficient buildings to reduce carbon emissions globally. Windows account for more than half of total energy losses in the buildings. The employment of energy efficient glazing in the construction industry is not common in Australia. This paper investigates several types of commercially available windows and their effectiveness in the hot and humid climate of Darwin. Although extensive literature is available for cold regions, these windows have not been studied in hot and humid climates such as the climate in Darwin. Building cooling loads of an academic building were calculated using Autodesk Revit Architecture and Carrier HAP. Double glazed variants offered approximately a 5% reduction in cooling loads and had a payback period of nearly 7 to 9 years, depending on the type of gas used to fill the pane cavity. The results indicate that triple glazed, or aerogel-based windows will provide about 11–12 % of energy saving in cooling loads. These can be a viable alternative and have a payback period of 11 years, while their average service life expectancy is 30 years. It was found that the feasibility of efficient glazing depends on market price, building usage, and energy efficiency of an overall building envelope.

19 October 2023 in International Journal of Energy Research
Verified
Journal Article
Open access
PDF file
DSDaniel Dodzi yao Setsoafia
Daniel Dodzi yao Setsoafia
KIRAN SREEDHAR RAMKIRAN SREEDHAR RAM
KIRAN SREEDHAR RAM
Hooman RadHooman Rad
Hooman Rad
David OmpongDavid Ompong
David Ompong
Jai SinghJai Singh
Jai Singh
Using the density functional theory (DFT), the influence of substitution of electron-donating (OCH3 and OH) and electron-accepting (F and Cl) groups on the peripheral thiophene units of DRTB-T donor molecule is studied. By optimizing the geometric structure, HOMO and LUMO energies, reorganization energies, optical properties, and photovoltaic properties are simulated. It is found that the ionization potential of the electron-donating derivatives (DRTB-4OCH3 and DRTB-4OH) reduces, but it increases for the electron-accepting derivatives (DRTB-4F and DRTB-4Cl) in comparison with that of DRTB-T. It is also found that the absorption spectra of the electron-donating derivatives (DRTB-4OCH3 and DRTB-4OH) get redshifted, but these get blue shifted for the electron-accepting derivatives (DRTB-4F and DRTB-4Cl) in comparison with those of DRTB-T. These changes in the electronic and optical properties of the modified structures result in higher PCE in BHJ OSCs with the blended active layer of DRTB-4F: NITI, DRTB-4Cl: NITI, in comparison with that of OSC with the active layer of DRTB-T: NITI and the highest being 15.0 in DRTB-4Cl: NITI. Our results may be expected to provide valuable insights into design optimization, leading to the fabrication of more efficient OSCs.

26 August 2019 in Materials
Verified
Journal Article
Open access
PDF file
Hooman RadHooman Rad
Hooman Rad
Jai SinghJai Singh
Jai Singh
In this paper, by developing a mathematical model, the temperature of PSCs under different operating conditions has been calculated. It is found that by reducing the density of tail states at the interfaces through some passivation mechanisms, the operating temperature can be decreased significantly at higher applied voltages. The results show that if the density of tail states at the interfaces is reduced by three orders of magnitude through some passivation mechanisms, then the active layer may not undergo any phase change up to an ambient temperature 300 K and it may not degrade up to 320 K. The calculated heat generation at the interfaces at different applied voltages with and without passivation shows reduced heat generation after reducing the density of tail states at the interfaces. It is expected that this study provides a deeper understanding of the influence of interface passivation on the operating temperature of PSCs.