A novel control approach based on Linear Parameter Varying (LPV) is designed for Electric Vehicles (EVs) to address the crucial challenge of torque derating. A high fidelity Interior Permanent Magnet Synchronous Motor (IPMSM) based EV is modelled by taking into account the influence of temperature. A closed loop torque compensation control architecture with LPV based Field Oriented Control (FOC) has been designed to mitigate the thermal effects. In order to curtail deteriorating of FOC due to parameter variation, a robust LPV observer has been proposed to estimate the degraded Permanent Magnet (PM) flux linkage and instantaneous torque production caused by uncertainties in stator resistance arises due to thermal effects. A LPV gain scheduling robust current controller for inner control loop of FOC has also been designed which ensures internal stability. The LPV observer-controller gains are computed by solving Linear Matrix Inequalities (LMIs) using convex optimization and singular value decomposition. The experiments simulations have been performed for EV operation against the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) class 3, New European Driving Cycle (NEDC) and Federal Test Procedure (FTP) driving cycles considering thermal effects in Matlab/Simulink. The efficacy of proposed control architecture for managing the derating torque of IPMSM based EV is demonstrated through the validity of results and detailed data analysis. The LPV based FOC is compared with conventional FOC control counterpart. The comparative experiments simulation results show that the overall Mean Square Error (MSE) value is exponentially reduced which establish superiority of the proposed control scheme.
15 December 2017 in IEEE/ASME Transactions on Mechatronics
Vehicle with electrified powertrains exhibit degraded performance when operated in hot environments. When the operating and surrounding temperatures rise, an electric drive suffers from torque derating as its parameters change. This paper proposes a Linear Parameter Varying (LPV) based observer controller pair to address this problem. The feedback Field Oriented Control (FOC) is the most commonly adopted instantaneous torque control method for an electrified powertrain drive system. The flux and torque performance of a conventional feedback FOC deteriorates under the vast uncertainties in rotor and stator resistance due to temperature variations during Electric Vehicle (EV) operation. To cater for these uncertain scenarios, a robust closed-loop observer is designed to estimate the thermally derated torque and flux. The stability of the whole LPV scheme is established. The efficacy of the proposed algorithm is demonstrated for an EV operating in Federal Urban Driving Schedule (FUDS) with a dynamic temperature profile. The nonlinear simulation results confirm the LPV observer capability to successfully estimate the flux and derated torque in an EV drive system. The proposed technique, after validating in simulation environment, is verified experimentally on an Induction Machine (IM) drive controlled by NI myRIO-1900.
5 October 2018 in Journal of Intelligent and Connected Vehicles
Purpose: The purpose of this paper is to investigate problems in performing stable lane changes and to find a solution to reduce energy consumption of autonomous electric vehicles. Design/methodology/approach: An optimization algorithm, model predictive control (MPC) and Karush–Kuhn–Tucker (KKT) conditions are adopted to resolve the problems of obtaining optimal lane time, tracking dynamic reference and energy-efficient allocation. In this paper, the dynamic constraints of vehicles during lane change are first established based on the longitudinal and lateral force coupling characteristics and the nominal reference trajectory. Then, by optimizing the lane change time, the yaw rate and lateral acceleration that connect with the lane change time are limed. Furthermore, to assure the dynamic properties of autonomous vehicles, the real system inputs under the restraints are obtained by using the MPC method. Based on the gained inputs and the efficient map of brushless direct-current in-wheel motors (BLDC IWMs), the nonlinear cost function which combines vehicle dynamic and energy consumption is given and the KKT-based method is adopted. Findings: The effectiveness of the proposed control system is verified by numerical simulations. Consequently, the proposed control system can successfully achieve stable trajectory planning, which means that the yaw rate and longitudinal and lateral acceleration of vehicle are within stability boundaries, which accomplishes accurate tracking control and decreases obvious energy consumption. Originality/value: This paper proposes a solution to simultaneously satisfy stable lane change maneuvering and reduction of energy consumption for autonomous electric vehicles. Different from previous path planning researches in which only the geometric constraints are involved, this paper considers vehicle dynamics, and stability boundaries are established in path planning to ensure the feasibility of the generated reference path.
The performance of an electrified powertrain in extreme operating conditions is greatly compromised. This is due to the fact that meeting the road loads, ensuring efficient powertrain operation, and minimizing the loss of lifetime (aging) of an electric machine are three essential but conflicting targets. In this paper, a unified multi-objective linear parameters varying (LPV)-based field-oriented control (FOC) framework is proposed to solve the problem of conflicting objectives mentioned above. The outer loop in a unified control framework generates the reference currents using linear matrix inequality (LMI)-based torque and flux controllers. Moreover, optimal flux is estimated using LPV observer to ensure efficient machine operations. In the inner loop of a unified control framework, the multi-objective controller (MOC) is synthesized by selecting optimal weighting functions using LMI-based convex optimization approach. The stability of the proposed unified control framework is also analyzed. The effectiveness of the proposed unified control framework is tested for a direct drive electrified powertrain of a three-wheeled vehicle commonly found in urban transportation for Asian countries. The urban driving schedule-based simulation results confirm that the lifetime of traction machine can be enhanced by appropriate control framework design without compromising its performance.