In this article, a compact, wideband Yagi-Uda antenna and its phased array antenna is optimized by a multi-objective antenna for the millimeter-wave (mmWave) band of fifth generation (5G) communication systems. Ten geometrical parameters of a single Yagi-Uda antenna are selected to widen the 5G operating bandwidth (BW) and increase the gain together using the Kriging model builder and pipeline sequential design (PLSD) in combined sampling strategy. The single antenna element provides a wide impedance bandwidth (IBW) from 26 to $34$ GHz with $20\%$ and a peak measured gain of $5.5 dBi$ at frequency $28$ GHz. The optimized antenna provides a high growth of $27.7\%$ and a $2 dB$ increase in peak gain over the reference antenna without any effect on the structure design. Then, a low-bit phased array antenna with the optimized 5G Yagi-Uda antenna is designed and optimized with directional radiation in the horizontal plane for the $28$ GHz base-station (BS) 5G applications. The array antenna consists of three sections: the Yagi-Uda antenna elements, Wilkinson power divider, and two bits phase shifters. The total size of the proposed array antenna is $60 \times 47\ mm^{2}$ and it operates in a measured frequency range of 26.2 to $29.1$ GHz around an operating frequency of $28$ GHz which provides $10.3\%$ IBW, and a maximum measured gain is $14 dB$ . Finally, two analog and hybrid precoding methods are considered to evaluate the performance of the proposed 5G phased array antenna. In the analog precoding, gain patterns are nearly constant in the range of $[-45^{\circ }, 45^{\circ }]$ with variations around $1 dB$ and the range for hybrid precoding, is $[-60^{\circ }, 60^{\circ }]$ with a very low sidelobe level (SLL). Measurement and simulation results complied well. Finally, a dual beamforming scheme is tested for mmWave (5G) vehicle-to-vehicle (V2V) communication systems in several channel models by an experimental test that shows the compatibility of this array antenna in mmWave V2V communications.
In the evolving landscape of wireless communications for 5G, 6G, and beyond, the deployment of unmanned aerial vehicles (UAVs) has emerged as a groundbreaking strategy to expand coverage areas due to their flexibility and ease of deployment. Simultaneously, reflecting intelligent surfaces (RISs) have introduced a transformative paradigm aimed at improving key performance metrics, such as average sum-rate and energy efficiency (EE). The seamless integration of advanced technologies, including UAVs, RIS, and nonorthogonal multiple access (NOMA), presents a promising avenue for significantly boosting the performance and efficiency of next-generation communication systems. This study investigates EE maximization for two scenarios in a NOMA-enabled mmWave network: 1) multi-UAV-mounted base stations (BSs) and 2) multi-UAV-mounted distributed RIS. In both cases, each UAV serves a NOMA cluster with imperfect successive interference cancellation (SIC), capturing the impact of hardware impairments in real-world NOMA systems. For each scenario, an optimization problem is formulated to maximize EE by jointly optimizing the beamforming matrix, phase shift matrix, NOMA power allocation, and UAV 3-D placement. The nonconvex problems are tackled using both model-based and model-free deep reinforcement learning (DRL) algorithms under constraints, such as minimum Quality of Service (QoS), beamforming and phase shift limits, and UAV trajectory constraints. The simulation results demonstrate that the proposed DRL algorithms significantly enhance spectral efficiency (SE) and EE, showcasing their suitability for 6G communication systems. Furthermore, a comparative analysis with orthogonal multiple access (OMA) and spatial-division multiple access (SDMA) confirms that NOMA outperforms both techniques, achieving substantial gains in efficiency and performance.
1 March 2023 in IEEE Transactions on Communications
In this paper, a cost-effective and high-accuracy precoding technique based on ϵ-Fuzzy pareto active learning (FPAL) is proposed for millimeter wave (mmWave) massive MIMO communications. The proposed method achieves a low iteration convergence with low complexity. Two practical structures, namely fully-connected and partially-connected structures are considered for hybrid precoding. Furthermore, the effect of high and low-resolution quantization in the digital-to-analog converter, phase shifter, and imperfect channel state information are discussed. The performance results of the proposed technique and alternating minimization methods beside fully digital techniques are compared and discussed in the terms of the spectral efficiency (SE), bit error rate (BER), normalized mean square error (NMSE), energy efficiency (EE) for phase-shifter (PS) with low bit quantization, and imperfect channel state information (CSI). To address the applicability of the proposed method, experimental results are obtained from a real mmWave hardware setup compliant with 3GPP standards, and verify the simulated ones for the proposed ϵ-FPAL hybrid precoding scheme. The reduced complexity, higher performance and EE make the proposed method suitable for 5G and beyond communication systems.
3 July 2021 in Journal of Computational Electronics