Endar Hidayat

Mr. Endar Hidayat

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 February 2022 in Polymers
Verified
Journal Article
Open access
PDF file
EHEndar Hidayat
Endar Hidayat
HHHarada Hiroyukuki
Harada Hiroyukuki
YMYoshiharu Mitoma
Yoshiharu Mitoma
SYSeiichiro Yonemura
Seiichiro Yonemura
HHHadi Imran A Halem
Hadi Imran A Halem
In the present study, we developed a new adsorbent product with zeolite crosslinked chitosan (ZL–CH hydrogel) to remove acid red 88 (AR88) in an aqueous solution. The effects of several factors, such as the comparison of ZL–CH hydrogel and the absence of chitosan, pH, adsorbent dosage, initial AR88 concentration, contact time, and ion strength, were determined. Obtained results showed that ZL–CH hydrogel improved AR88 removal compared to the absence of chitosan, with an adsorption capacity of 332.48 mg/g in equilibrium time of 1 min, and adding ionic strength had no significant effect. However, with optimal conditions at pH 2.0, dry ZL–CH became hydrogel due to protonation of amino and hydroxyl groups through hydrogen bonds in the AR88 solution. Volume fraction and interaction force decreased with increasing porosity, leading to an increase in adsorption capacity and swelling ratio. Experimental data of the adsorption process showed the Freundlich isotherm model. The equilibrium for adsorption and swelling kinetics studies showed and fitted a pseudo-second-order model. NaOH was successful as a desorbing agent with 93.8%, and it followed the pseudo-second-order kinetics model. The recycling process indicates great potential for AR88 removal.

22 March 2023 in Materials
Verified
Journal Article
Open access
PDF file
EHEndar Hidayat
Endar Hidayat
TYTomoyuki Yoshino
Tomoyuki Yoshino
SYSeiichiro Yonemura
Seiichiro Yonemura
YMYoshiharu Mitoma
Yoshiharu Mitoma
HHHarada Hiroyukuki
Harada Hiroyukuki
To address Cu(II) and Cr(VI) water pollution, a carbonized zeolite/chitosan (C-ZLCH) composite adsorbent was produced via pyrolysis at 500 °C for two hours. C-ZLCH was characterized using scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), and zeta potential measurements. The batch experiments were performed by varying the initial pH, concentration, and contact time. The optimal pH values for Cu(II) and Cr(VI) were 8.1 and 9.6, respectively. The highest adsorption capacities for Cu(II) and Cr(VI) were 111.35 mg/g at 60 min and 104.75 mg/g at 90 min, respectively. The effects of chemicals such as sodium (Na+), glucose, ammonium (NH4+), and acid red 88 (AR88) were also studied. Statistical analysis showed that sodium had no significant effect on Cu(II) removal, in contrast to Cr(VI) removal. However, there was a significant effect of the presence of glucose, ammonium, and AR88 on both Cu(II) and Cr(VI) removal. The adsorption isotherm and kinetic models were fitted using Langmuir and pseudo-second-order models for Cu(II) and Cr(VI), respectively.

28 July 2023 in Gels
Verified
Journal Article
Open access
PDF file
Nur Maisarah Binti Mohamad SarbaniNur Maisarah Binti Mohamad Sarbani
Nur Maisarah Binti Mohamad Sarbani
EHEndar Hidayat
Endar Hidayat
KNKanako Naito
Kanako Naito
YMYoshiharu Mitoma
Yoshiharu Mitoma
HHHarada Hiroyukuki
Harada Hiroyukuki
Heavy metals, such as chromium (VI) and lead (II), are the most common pollutants found in wastewater. To solve these problems, this research was intended to synthesize magnetite hydrogel beads (CMC-CS-Fe3O4) by crosslinking carboxymethyl cellulose (CMC) and chitosan (CS) and impregnating them with iron oxide (Fe3O4) as a potential adsorbent to remove Cr (VI) and Pb (II) from water. CMC-CS-Fe3O4 was characterized by pHzpc, scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR). Batch removal experiments with different variables (CMC:CS ratio, pH, initial metals concentration, and contact time) were conducted, and the results revealed that CMC-CS-Fe3O4 with a CMC:CS (3:1) ratio had the best adsorption capacity for Cr (VI) and Pb (II) at pH levels of 2 and 4, respectively. The findings of this research revealed that the maximum adsorption capacity for Cr (VI) and Pb (II) were 3.5 mg/g and 18.26 mg/g, respectively, within 28 h at 30 ℃. The adsorption isotherm and adsorption kinetics suggested that removal of Cr (VI) and Pb (II) were fitted to Langmuir and pseudo-second orders. The highest desorption percentages for Cr (VI) and Pb (II) were 70.43% and 83.85%, achieved using 0.3 M NaOH and 0.01 M N·a2EDTA, respectively. Interestingly, after the first cycle of the adsorption–desorption process, the hydrogel showed a sudden increase in adsorption capacity for Cr (VI) and Pb (II) until it reached 7.7 mg/g and 33.0 mg/g, respectively. This outcome may have certain causes, such as entrapped metal ions providing easy access to the available sites inside the hydrogel or thinning of the outer layer of the beads leading to greater exposure toward active sites. Hence, CMC-CS-Fe3O4 hydrogel beads may have potential application in Cr (VI) and Pb (II) removal from aqueous solutions for sustainable environments.

1 September 2024 in Arabian Journal of Chemistry
Verified
Journal Article
Open access
EHEndar Hidayat
Endar Hidayat
Nur Maisarah Binti Mohamad SarbaniNur Maisarah Binti Mohamad Sarbani
Nur Maisarah Binti Mohamad Sarbani
SSSadaki Samitsu
Sadaki Samitsu
FNFerry Anggoro Ardy Nugroho
Ferry Anggoro Ardy Nugroho
SLSudip Kumar Lahiri
Sudip Kumar Lahiri
HHHiroyuki Harada
Hiroyuki Harada

Verified
Journal Article
Open access
PDF file
EHEndar Hidayat
Endar Hidayat
Nur Maisarah Binti Mohamad SarbaniNur Maisarah Binti Mohamad Sarbani
Nur Maisarah Binti Mohamad Sarbani
SYSeiichiro Yonemura
Seiichiro Yonemura
YMYoshiharu Mitoma
Yoshiharu Mitoma
HHHarada Hiroyukuki
Harada Hiroyukuki
Phosphate (PO43−) is an essential nutrient in agriculture; however, it is hazardous to the environment if discharged in excess as in wastewater discharge and runoff from agriculture. Moreover, the stability of chitosan under acidic conditions remains a concern. To address these problems, CS-ZL/ZrO/Fe3O4 was synthesized using a crosslinking method as a novel adsorbent for the removal of phosphate (PO43−) from water and to increase the stability of chitosan. The response surface methodology (RSM) with a Box–Behnken design (BBD)-based analysis of variance (ANOVA) was implemented. The ANOVA results clearly showed that the adsorption of PO43− onto CS-ZL/ZrO/Fe3O4 was significant (p ≤ 0.05), with good mechanical stability. pH, dosage, and time were the three most important factors for the removal of PO43−. Freundlich isotherm and pseudo-second-order kinetic models generated the best equivalents for PO43− adsorption. The presence of coexisting ions for PO43− removal was also studied. The results indicated no significant effect on PO43− removal (p ≤ 0.05). After adsorption, PO43− was easily released by 1 M NaOH, reaching 95.77% and exhibiting a good capability over three cycles. Thus, this concept is effective for increasing the stability of chitosan and is an alternative adsorbent for the removal of PO43− from water.

1 January 2022 in Adsorption Science & Technology
Verified
Journal Article
Open access
PDF file
EHEndar Hidayat
Endar Hidayat
SYSeiichiro Yonemura
Seiichiro Yonemura
YMYoshiharu Mitoma
Yoshiharu Mitoma
HHHarada Hiroyukuki
Harada Hiroyukuki
Developing innovative technology for removing methylene blue (MB) from water is essential since the widespread discharge of MB from industrial effluents causes problems for humans and the environment. In this study, we conducted the adsorption method, a simple technique that utilizes an adsorbent. Chitosan is cross-linked with zeolite as a promising adsorbent material and environmentally friendly. For the characterization, FTIR, SEM-EDS, DLS, and pHzpc were analyzed. It was discovered that the removal percentage reached 97% with an adsorption capacity of 242.51 mg/g for 60 minutes at pH 10. The adsorption isotherm and kinetic model were investigated. As a result, the Freundlich model and pseudo-second-order model were fitted to the adsorption process. Moreover, the effect of other ions was investigated for 5 minutes of mixing time. The results showed that the removal percentage increased in the presence of H2O2 ion. Contrary to sodium chloride, glucose, and citric acid ions, the effectiveness of H2SO4 as a desorbing agent was 99.65% for 30 minutes at 45°C.