The process of rapid gas heating in the region of distributed pulsed sliding surface gas discharge (plasma sheet) of nanosecond duration has been studied. The fraction of electric energy converted into heat during the passage of discharge current has been estimated from a detailed analysis of the dynamics of shock wave fields arising upon the initiation of discharge. Experiments are performed in quiescent gases (air, nitrogen, helium) and in supersonic airflows behind a plane shock wave in a shock tube at gas densities within 0.04–0.45 kg/m3 and flow velocities up to 1600 m/s.
Results are presented from experimental studies of the plasma layer structure of a distributed sliding surface discharge excited in quiescent air and in a uniform gas flow behind a plane shock wave at gas densities of 0.03–0.30 kg/m3. The dynamics of weak shock waves generated after discharge initiation was studied. According to the experimental and simulation results, 40% of the discharge energy transforms into heat within a surface gas layer in the energy input stage, which lasts up to 200 ns.
15 February 2018 in Journal of Physics D: Applied Physics
This paper presents experimental and numerical investigations of high-current sliding surface discharges of nanosecond duration and their effect on high-speed flow as plasma actuators in a shock tube. This study deals with the effectiveness of a sliding surface discharge at low and medium air pressure. Results cover the electrical characteristics of the discharge and optical visualization of the discharge and high-speed post-discharge flow. A sliding surface discharge is first studied in quiescent air conditions and then in high-speed flow, being initiated in the boundary layer at a transverse flow velocity of 50–950 m s −1 behind a flat shock wave in air of density 0.04–0.45 kg m −3 . The discharge is powered by a pulse voltage of 25–30 kV and the electric current is ~0.5 kA. Shadow imaging and particle image velocimetry (PIV) are used to measure the flow field parameters after the pulse surface discharge. Shadow imaging reveals shock waves originating from the channels of the discharge configurations. PIV is used to measure the velocity field resulting from the discharge in quiescent air and to determine the homogeneity of energy release along the sliding discharge channel. Semicylindrical shock waves from the channels of the sliding discharge have an initial velocity of more than 600 m s −1 . The shock-wave configuration floats in the flow along the streamlined surface. Numerical simulation based on the equations of hydrodynamics matched with the experiment showed that 25%–50% of the discharge energy is instantly transformed into heat energy in a high-speed airflow, leading to the formation of shock waves. This energy is comparable to the flow enthalpy and can result in significant modification of the boundary layer and the entire flow.
1 January 2014 in Moscow University Physics Bulletin
The space-time characteristics of a nanosecond combined volume discharge with preionization from a plasma sheet with a nanosecond duration in air (∼200 ns) are investigated. The integral discharge radiation, radiation spectrum, and discharge current under conditions within the discharge volume, including gas-dynamic flow with a planar shock wave, are analyzed. It is shown that the volume discharge glow is homogeneous in the master phase. The glow in the area of the shock-wave front increases and its duration may be more than 2 μs.
When particle-based velocimetry techniques are applied to complex high-speed flows, the non-ideal tracing capability of seeding particles becomes most prominent. Here, we present a numerical particle tracking methodology to predict the bias errors associated with particle image velocimetry (PIV) of flows with moving shocks. The methodology involves performing computational fluid dynamics simulations that yield time-varying flow fields, which are then used to compute the actual paths and velocities of the seeding particles. We test this approach on PIV measurements of the velocity field behind an expanding semi-cylindrical shock wave, generated by a pulsed sliding discharge. Although in transient high-speed compressible flows the PIV imaging accuracy is still hindered by the finite particle response, the proposed methodology allows for both a successful quantification of PIV errors as well as a direct comparison between particle-based velocimetry and numerical simulations.
Gasdynamic perturbations arising during the initiation of a pulsed surface (plasma sheet) discharge have been experimentally studied in a shock tube. The evolution of flow was also numerically simulated within the framework of a thermal energy deposition model. Experimental values of the velocity of perturbations well agree with the results of calculations obtained assuming that about 50% of the energy deposited in the surface layer is converted into heat in the stage of energy supply.