1 February 2017 in Journal of Physics D: Applied Physics
This paper explores the phenomena associated with pulsed discharge energy deposition in the near-surface gas layer in front of a shock wave from the flow control perspective. The energy is deposited in 200 ns by a high-current distributed sliding discharge of a ‘plasma sheet’ type. The discharge, covering an area of mm 2 , is mounted on the top or bottom wall of a shock tube channel. In order to analyse the time scales of the pulsed discharge effect on an unsteady supersonic flow, we consider the propagation of a planar shock wave along the discharge surface area 50–500 μ s after the discharge pulse. The processes in the discharge chamber are visualized experimentally using the shadowgraph method and modelled numerically using 2D/3D CFD simulations. The interaction between the planar shock wave and the discharge-induced thermal layer results in the formation of a lambda-shock configuration and the generation of vorticity in the flow behind the shock front. We determine the amount and spatial distribution of the electric energy rapidly transforming into heat by comparing the calculated flow patterns and the experimental shadow images. It is shown that the uniformity of the discharge energy distribution strongly affects the resulting flow dynamics. Regions of turbulent mixing in the near-surface gas are detected when the discharge energy is deposited non-uniformly along the plasma sheet. They account for the increase in the cooling rate of the discharge-induced thermal layer and significantly influence its interaction with an incident shock wave.
25 January 2022 in Physics of Fluids
Since the onset of the COVID-19 pandemic, a large number of flow visualization procedures have been proposed to assess the effect of personal protective equipment on respiratory flows. This study suggests infrared thermography as a beneficial visualization technique because it is completely noninvasive and safe and, thus, can be used on live individuals rather than mannequins or lung simulators. Here, we examine the effect of wearing either of three popular face coverings (a surgical mask, a cloth mask, or an N95 respirator with an exhalation valve) on thermal signatures of exhaled airflows near a human face while coughing, talking, or breathing. The flow visualization using a mid-wave infrared camera captures the dynamics of thermal inhomogeneities induced by increased concentrations of carbon dioxide in the exhaled air. Thermal images demonstrate that both surgical and cloth face masks allow air leakage through the edges and the fabric itself, but they decrease the initial forward velocity of a cough jet by a factor of four. The N95 respirator, on the other hand, reduces the infrared emission of carbon dioxide near the person's face almost completely. This confirms that the N95-type mask may indeed lead to excessive inhalation of carbon dioxide as suggested by some recent studies.
1 January 2018 in Physics of Fluids
When particle-based velocimetry techniques are applied to complex high-speed flows, the non-ideal tracing capability of seeding particles becomes most prominent. Here, we present a numerical particle tracking methodology to predict the bias errors associated with particle image velocimetry (PIV) of flows with moving shocks. The methodology involves performing computational fluid dynamics simulations that yield time-varying flow fields, which are then used to compute the actual paths and velocities of the seeding particles. We test this approach on PIV measurements of the velocity field behind an expanding semi-cylindrical shock wave, generated by a pulsed sliding discharge. Although in transient high-speed compressible flows the PIV imaging accuracy is still hindered by the finite particle response, the proposed methodology allows for both a successful quantification of PIV errors as well as a direct comparison between particle-based velocimetry and numerical simulations.
28 April 2016 in Shock Waves
1 August 2018 in Physics of Fluids
The paper studies, both experimentally and numerically, a high-speed transient flow induced by a pulsed volume discharge in still air at low pressure. It is shown that, in the constricted mode, the discharge is capable of producing uniform deposition of the electrical energy into a long (24 mm in length), thin (less than 2 mm in radius) plasma column. Flow visualization experiments using particle image velocimetry (PIV) and high-speed shadow imaging indicate that this pulsed localized energy deposition generates a highly symmetrical cylindrical shock wave expanding at an average speed of 550 m/s within the first 40 μs after the discharge. Three-dimensional computational fluid dynamics (CFD) simulations successfully reproduce the experimentally observed flow structures and provide better insight into the complex discharge-induced flow. Modeling the trajectories of “virtual” particles within the CFD-predicted flow yields excellent agreement between numerical and PIV flow velocity profiles, and this comparison is used to quantify the rates of “rapid” energy thermalization in the pulsed discharge.
26 January 2021 in Quantitative InfraRed Thermography Journal
As a result of physiological thermoregulation, human eccrine sweat glands produce sessile droplets on the skin. This paper studies the thermal signatures associated with droplet dynamics on the face and the fingers of an individual using a mid-wave infrared camera. The thermal image analysis focuses on the morphology and evolution of individual droplets induced by various emotional stimuli. We follow the growth and evaporation rate of droplets with different lifetimes ranging from seconds to tens of seconds. The results are of interest in the fields of medicine and psychophysiology (in the studies of human emotional sweating) or physics (for the development of models of evaporative surface cooling).