Favipiravir, molnupiravir, and ritonavir have been recently approved as the first oral antivirals for treatment of SARS‐CoV‐2 viral infections. Their combination was reported in several clinical studies, alternatively, to enhance the viral eradication and improve patient's recovery times and rates. Being all orally administered, therefore, the development of new sensitive and validated methodologies for their simultaneous determination is a necessitate. In the proposed research, a sensitive, selective, and simple high‐performance thin layer chromatography method was developed and validated for determination of favipiravir, molnupiravir, and ritonavir. Silica gel 60F254 thin layer chromatography plates were used as stationary phase for this separation using mobile phase composed of methylene chloride:ethyl acetate:methanol:25% ammonia (6:3:4:1, v/v/v/v). Densitometric detection was performed at wavelength 289 nm. Peaks of favipiravir, molnupiravir, and ritonavir were resolved at retention factors 0.22, 0.42, and 0.63, respectively. The proposed method was found linear within the specified ranges of 3.75–100.00 μg/mL for molnupiravir and favipiravir, and 2.75–100.00 μg/mL for ritonavir. Limits of detection were found to be 1.12, 1.21, and 0.89 μg/mL for favipiravir, molnupiravir, and ritonavir, respectively. This is the first method to be reported for the simultaneous determination of the cited three antiviral drugs. The method was assessed on novel greenness metrics.

Following the spread of the COVID-19 pandemic crisis, a race was initiated to find a successful regimen for postinfections. Among those trials, a recent study declared the efficacy of an antiviral combination of favipiravir (FAV) and molnupiravir (MLP). The combined regimen helped in a successful 60% eradication of the SARS-CoV-2 virus from the lungs of studied hamster models. Moreover, it prevented viral transmission to cohosted sentinels. Because both medications are orally bioavailable, the coformulation of FAV and MLP can be predicted. The developed study is aimed at developing new green and simple methods for the simultaneous determination of FAV and MLP and then at their application in the study of their dissolution behavior if coformulated together. A green micellar HPLC method was validated using an RP-C18 core-shell column (5 μm, 150 × 4.6 mm) and an isocratic mixed micellar mobile phase composed of 0.1 M SDS, 0.01 M Brij-35, and 0.02 M monobasic potassium phosphate mixture and adjusted to pH 3.1 at 1.0 mL min⁻¹ flow rate. The analytes were detected at 230 nm. The run time was less than five minutes under the optimized chromatographic conditions. Four other multivariate chemometric model methods were developed and validated, namely, classical least square (CLS), principal component regression (PCR), partial least squares (PLS-1), and genetic algorithm–partial least squares (GA–PLS-1). The developed models succeeded in resolving the great similarity and overlapping in the FAV and MLP UV spectra unlike the traditional univariate methods. All methods were organic solvent-free, did not require extraction or derivatization steps, and were applied for the construction of the simultaneous dissolution profile for FAV tablets and MLP capsules. The methods revealed that the amount of the simultaneously released cited drugs increases up until reaching a plateau after 15 and 20 min for FAV and MLP, respectively. The greenness was assessed on GAPI and found to be in harmony with green analytical chemistry concepts.

The in vitro panel of technologies to address biomolecular interactions are in play, however microscale thermophoresis is continuously increasing in use to represent a key player in this arena. This review highlights the usefulness of microscale thermophoresis in the determination of molecular and biomolecular affinity interactions. This work reviews the literature from January 2016 to January 2022 about microscale thermophoresis. It gives a summarized overview about both the state-of the art and the development in the field of microscale thermophoresis. The principle of microscale thermophoresis is also described supported with self-created illustrations. Moreover, some recent advances are mentioned that showing application of the technique in investigating biomolecular interactions in different fields. Finally, advantages as well as drawbacks of the technique in comparison with other competing techniques are summarized.

A green liquid chromatographic method is considered in this work to minimize the environmental impact of waste solvents. One important principle is to replace or eliminate the use of hazardous organic solvents. Organic impurities in any active pharmaceutical ingredient could arise either during the process of its synthesis, or as degradation products developed throughout the shelf-life. Remdesivir (RDS) is an antiviral drug, approved by the US Food and Drug Adminstration (-FDA), to treat SARS-Cov-2 virus during its pandemic crisis. We studied the stability of remdesivir against several degradation pathways using the organic solvent-free liquid chromatographic technique. Separation was performed on RP-C18 stationary phase using mixed-micellar mobile phase composed of a mixture of 0.025 M Brij-35, 0.1 M sodium lauryl sulfate (SLS), and 0.02 M disodium hydrogen phosphate, adjusted to pH 6.0. The mobile phase flow rate was 1 mL min⁻¹, and detection was carried out at a wavelength of 244 nm. We profiled the impurities that originated in mild to drastic degradation conditions. The method was then validated according to International Conference of Harmonization (ICH) guidelines within a linearity range of 5–100 μg mL⁻¹ and applied successfully for the determination of the drug in its marketed dosage form. A brief comparison was established with reported chromatographic methods, including a greenness assessment on two new metrics (GAPI and AGREE). This study is the first to be reported as eco-friendly, solvent-free, and stability indicating LC methodology for RDS determination and impurity profiling.

Fluorescence spectroscopy has gained much attention over the last few years. Its advantages cover both analytical performance as well as ecological greenness. The quality control of pharmaceuticals requires sensitive, fast and economic methodologies to provide a high throughput at desirable costs. The low energy and decreased solvent consumption make this technique green as well as economic, and hence it is much preferred by pharmaceutical industries. Remdesivir is a recent antiviral, previously used for the treatment of Ebola virus infections, which was approved by the US-FDA in 2020 for treatment of infections caused by SARS-CoV-2 virus. Formulation and wide-scale production of this drug started recently and hence methodologies related to its quality control are highly required. A smart spectrofluorimetric method was validated as per the US-FDA guidelines for the facile estimation of Remdesivir. The assay of Remdesivir was based on its native fluorescence measurements at pH 4 and wavelengths of 244/405 nm. Calibration was achieved over the range of 1.0–65.0 ng mL⁻¹. Different variables affecting the proposed methodology were studied to achieve maximum sensitivity, at limits of detection and quantification of 0.287 and 0.871 ng mL⁻¹, respectively. The developed method is regarded as the first spectrofluorimetric one for the estimation of Remdesivir. The developed method was also utilized for the determination of the drug in its formulated IV infusion and in spiked human plasma. Statistical analysis verified that this method is accurate and reproducible. Moreover, the ecological impact of the developed procedures was evaluated on two recently reported assessment metrics, the Green Analytical Procedure Index (GAPI) and AGREE-analytical greenness metric, to emphasize the greenness of the procedure.