On-site determination of trace copper ions in natural waters is of great significance to environmental monitoring, and how to develop accurate and specific point-of-care test methods is one critical issue. In the study, a paper-based analytical device (PAD) being modified with a new truncated DNAzyme (CLICK-T, which was derived from a reported DNAzyme-CLICK-17) was developed for Cu ions detection. The detection mechanism was based on Cu(II)-catalyzed azide-alkyne cycloaddition (Cu(II)AAC) reaction. It can directly conduct on-site analysis of Cu(II) ions based on fluorescent signals detected using a mobile phone. In the assay, the CLICK-T was firstly modified on the PADs. Then, water samples containing Cu ions mixed with 3-azido-7-hydroxycoumarin and 3-butyn-1-ol were instantly dripped on PADs and incubated for 20 min. Finally, the PADs were excited at 365 nm and emitted fluorescence which could be analyzed on site using smart phones. The Cu(II) concentration could be quantified through RGB analysis with the aid of iPhone APP software. The limit of detection is 0.1 µM by the naked eye due to the fact that CLICK-T exhibited a good catalytic effect on Cu(II)AAC. The Cu(II) concentration could also be directly detected without using reductant, such as ascorbic acid, which is prone to be oxidized in air. This simplifies the PDA detection process improves its efficiency. The PAD is convenient for the on-site analysis of Cu ions in natural waters.
Patent big data serves as a valuable scientific research source for technological innovation, enabling breakthroughs beyond existing knowledge and fostering disruptive ideas. One key challenge in this field is how to efficiently obtain patent documents quickly and accurately. This is a critical focus in the exploration of patent search methodologies. Our approach differs from conventional patent search processes. We have developed a three-level patent classification method that utilizes a multi-step search strategy with specific constraints, alongside an innovative classification system based on the FastText algorithm. By combining these techniques with an emphasis on recall ratio, we can test the efficacy of each level of the database boundaries. This enables swift identification of target patents and allows for focused screening in specific fields, providing robust support for technical or product innovation activities. Furthermore, we applied this method to the retrieval of DBDI patent data, which represents one of the three leading commercial direct ionization ion source technologies globally. Our classification results indicate a remarkable accuracy of 96.97%, reflecting a 21.97% improvement over the TextRNN_Att text algorithm. This effectively demonstrates the success of our proposed methodology. Overall, this study offers a theoretical framework for researching multi-level classification methods in logical retrieval and provides a practical foundation for classifying direct ionization and ionization technologies.
Ambient ionization mass spectrometry (AIMS) is an emerging onsite rapid detection technique that has been applied in the area of public security. AIMS measurements of samples with complex matrices are characterized by poor reproducibility and complexity. Low reproducibility and complex background cause imprecise screening for trace drugs in hair. In this work, a rapid screening method of methamphetamine in hair is proposed. Firstly, the generalized weighted robust principal component analysis (GWRPCA) algorithm is used to remove background and extract the analytical signals. The similarity scores between the analytical signals and standard mass spectrum of methamphetamine were calculated based upon an improved Pearson’s correlation coefficient combined with the preset matching threshold to achieve rapid screening of methamphetamine in hair. The results show that this method accurately screens for this drug hair and identifies actual false positives with 100% accuracy when the analyte threshold was 0.1 ng/mg and the matching threshold was 0.6. This study provides technical support for the rapid screening for drug abuse by AIMS.
9 January 2025 in IEEE Transactions on Instrumentation and Measurement
Extraction of micro-vibration information from a single-shot speckle image is realized base on the row-by-row exposure mechanism of a rolling shutter camera and the high intensity of laser speckle. Normalized cross correlation and cubic spline interpolation algorithm is firstly used between nonoverlapping gray scales of adjacent rows to infer micro-displacement information. With number of rows set as 342, wide frequency range from 300 Hz to 20 kHz sinusoid signals are recovered with relative errors smaller than 2%. For low frequency signals from 40 Hz to 300 Hz, the relative errors of the extracted frequency are smaller than 5%. The effects of number of sampling cycles (NSC) and sampling points in unit period on the system performance are investigated and high accuracy is obtained with NSC of 4 and sampling points of 3 per signal period. In a single shot image, spatial multi points vibration detection scheme is presented and experimentally realized. The representative signals of 5 kHz, 10 kHz and 20 kHz are successfully extracted in the multidimensional scenes of 1D, 2D and 3D respectively, and the relative errors are all within 0.5%. This scheme can be potentially used in air surveillance for wide range remote sensing of interested object or sounding.