Hyusein Yemendzhiev

Dr. Hyusein Yemendzhiev

orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 August 2008 in Journal of Industrial Microbiology and Biotechnology
Verified
Journal Article
Closed access
PDF file
Hyusein YemendzhievHyusein Yemendzhiev
Hyusein Yemendzhiev
MGM. Gerginova
M. Gerginova
Albert KrastanovAlbert Krastanov
Albert Krastanov
ISI. Stoilova
I. Stoilova
ZAZlatka Alexieva
Zlatka Alexieva
Trametes versicolor 1 was shown to grow on phenol as its sole carbon and energy source. The culture growth and degradation ability dependence on culture medium pH value was observed. The optimal pH value of a liquid Czapek salt medium was 6.5. The investigated strain utilized completely 0.5 g/l phenol in 6 days. The dynamics of the phenol degradation process was investigated. The process was characterized by specific growth rate μmax 0.33 h−1, metabolic coefficient k = 4.4, yield coefficient Y x/s = 0.23 and rate of degradation Q = 0.506 h−1. The intracellular activities of phenol hydroxylase (0.333 U/mg protein) and cis,cis-muconate lactonizing enzyme (0.41 U/mg protein) were demonstrated for the first time in this fungus. In an attempt to estimate the occurrence of gene sequences in T. versicolor 1 related to phenol degradation pathway a dot blot analysis with total DNA isolated from this strain was performed. Two synthetic oligonucleotides were used as hybridizing probes. One of the probes was homologous to the 5′end of phyA gene coding for phenol hydroxylase in Trichosporon cutaneum ATCC 46490. The other probe was created on the basis of cis,cis-muconate lactonizing enzyme coding gene in T. cutaneum ATCC 58094. The results of these investigations showed that T. versicolor 1 may carry genes similar to those of Trichosporon cutaneum capable to degrade phenol.

5 June 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GAGalena Angelova
Galena Angelova
Hyusein YemendzhievHyusein Yemendzhiev
Hyusein Yemendzhiev
RZRoumiana Zaharieva
Roumiana Zaharieva
Mariya BrazkovaMariya Brazkova
Mariya Brazkova
Ralitza KolevaRalitza Koleva
Ralitza Koleva
Albert KrastanovAlbert Krastanov
Albert Krastanov
The bio-fabrication of sustainable mycelium-based composites (MBCs) from renewable plant by-products offers a promising approach to reducing resource depletion and supporting the transition to a circular economy. In this research, MBCs were obtained by cultivating Ganoderma resinaceum GA1M on essential oils and agricultural by-products: hexane-extracted rose flowers (HERF), steam-distilled lavender straw (SDLS), wheat straw (WS), and pine sawdust (PS), used as single or mixed substrates. The basic physical and mechanical properties revealed that MBCs perform comparably to high-efficiency thermal insulating and conventional construction materials. The relatively low apparent density, ranging from 110 kg/m3 for WS-based to 250 kg/m3 for HERF-based composites, results in thermal conductivity values between 0.043 W/mK and 0.054 W/mK. Compression stress (40–180 kPa at 10% deformation) also revealed the good performance of the composites. The MBCs had high water absorption due to open porosity, necessitating further optimization to reduce hydrophilicity and meet intended use requirements. An aerobic biodegradation test using respirometry indicated ongoing microbial decomposition for all tested bio-composites. Notably, composites from mixed HERF and WS (50:50) showed the most rapid degradation, achieving over 46% of theoretical oxygen consumption for complete mineralization. The practical applications of MBCs depend on achieving a balance between biodegradability and stability.

3 June 2025 in Biomass
Verified
Journal Article
Open access
PDF file
VGVelyana G. Georgieva
Velyana G. Georgieva
Lenia-Nezaet de Brito GonsalveshLenia-Nezaet de Brito Gonsalvesh
Lenia-Nezaet de Brito Gonsalvesh
SMSonia Mileva
Sonia Mileva
MHMariyana Hamanova
Mariyana Hamanova
Hyusein YemendzhievHyusein Yemendzhiev
Hyusein Yemendzhiev
This study investigates the potential of biochars derived from agricultural waste biomass for the removal of heavy metal ions from aqueous solutions. Biochars were produced via slow pyrolysis at 793 K using almond shells (AS), walnut shells (WS), pistachio shells (PS), and rice husks (RH) as feedstocks. The physicochemical properties and adsorption performance of the resulting materials were evaluated with respect to Cd(II), Mn(II), Co(II), Ni(II), Zn(II), total Iron (Fetot), total Arsenic (Astot), and total Chromium (Crtot) in model solutions. Surface morphology, porosity, and surface chemistry of the biochars were characterized by scanning electron microscopy (SEM), nitrogen adsorption at 77 K (for specific surface area and pore structure), Fourier-transform infrared spectroscopy (FTIR), and determination of the point of zero charge (pHpzc). Based on their textural properties, biochars derived from WS, PS, and AS were classified as predominantly microporous, while RH-derived biochar exhibited mesoporous characteristics. The highest Brunauer–Emmett–Teller (SBET) surface area was recorded for PS biochar, while RH biochar showed the lowest. The pistachio shell biochar exhibited the highest specific surface area (440 m2/g), while the rice husk biochar was predominantly mesoporous. Batch adsorption experiments were conducted at 25 °C, with an adsorbent dose of 3 g/L and a contact time of 24 h. The experiments in multicomponent systems revealed removal efficiencies exceeding 87% for all tested metals, with maximum values reaching 99.9% for Cd(II) and 97.5% for Fetot. The study highlights strong correlations between physicochemical properties and sorption performance, demonstrating the suitability of these biochars as low-cost sorbents for complex water treatment applications.

23 March 2022 in Biotechnology & Biotechnological Equipment
Verified
Journal Article
Open access
YMYana Mersinkova
Yana Mersinkova
Hyusein YemendzhievHyusein Yemendzhiev
Hyusein Yemendzhiev
VNValentin Nenov
Valentin Nenov
In this study the influence of the external circuit resistance on the metabolic behaviour of anodic biofilm in Microbial fuel cell (MFC) was studied. The results obtained demonstrated that extremely low and extremely high circuit loads could deteriorate the bio-electrochemistry of anodic respiration by shifting the microbial metabolism towards typical fermentation of the substrates. The best conditions for respiration and efficient substrate mineralisation of nearly 70% were found in the MFC reactor with 0.1 kΩ resistance in the anode and cathode connecting circuit. Two species of electrochemically active bacteria were isolated from the anodic community and were taxonomically affiliated to Pseudomonas and Bacillus genera based on 16 s rRNA genes amplification and sequencing.

28 February 2022 in Processes
Verified
Journal Article
Open access
PDF file
RKRalitza Koleva
Ralitza Koleva
GPGergana Peeva
Gergana Peeva
Hyusein YemendzhievHyusein Yemendzhiev
Hyusein Yemendzhiev
Valentin NenovValentin Nenov
Valentin Nenov
Two options, in regard to applying microbial fuel cells (MFCs) in water treatment, are under discussion, namely the conversion of the chemical energy of organic substrates to electricity, as well as the use their potential to reduce different species, such as the ionic form of copper (Cu2+ converted to metal copper) and iron (Fe3+ converted to Fe2+). The high reduction potential of Cu2+ and Fe3+ makes the processes of electricity production and metal reduction, to be performed simultaneously in MFC, achievable. The electrical yield measurement during the experiments of anodic organic matter degradation by MFC in treating an artificial wastewater with chemical oxygen demand (COD) 0.6 and 1.6 g O2·dm−3, as initial COD, are given. It is demonstrated that the higher organic load is associated with better electrical yield. A comparison of MFC and conventional anaerobic digestion performance is discussed, as well. Experimental proofs of copper removal and phosphate mobilization, following the iron reduction of FePO4, are also reported.

1 January 2011 in Biotechnology & Biotechnological Equipment
Verified
Journal Article
Open access
Hyusein YemendzhievHyusein Yemendzhiev
Hyusein Yemendzhiev
ATAnna Terziyska
Anna Terziyska
JMJordan Manasiev
Jordan Manasiev
ZAZlatka Alexieva
Zlatka Alexieva
One of the most distributed groups of industrial pollutants consists of aromatic hydrocarbons. Because of the complex nature of such wastes the obtaining of new strains able to degrade different toxic aromatic compounds in mixtures is a challenge to many scientists exploring the area of environmental microbiology.In this study the strain of white rot fungus Trametes versicolor was cultivated in a medium comprising a mixture of phenol (0.2 g/l), resorcinol (0.1 g/l), p-cresol (0.1 g/l), and o-nitrophenol (0.14 g/l). Phenol, resorcinol and p-cresol were degraded in 24 hours and then a slow o-nitrophenol degradation was observed. There was about 50% decrease of o-nitrophenol concentration in 144 hours.The degradation of the tested concentrations of phenol, resorcinol and p-cresol in a mixture showed similar characteristics as in the experiments with each of them used as a single carbon substrate. The data showed that the presence of o-nitrophenol does not influence the biodegradation rate of other co...