Two options, in regard to applying microbial fuel cells (MFCs) in water treatment, are under discussion, namely the conversion of the chemical energy of organic substrates to electricity, as well as the use their potential to reduce different species, such as the ionic form of copper (Cu2+ converted to metal copper) and iron (Fe3+ converted to Fe2+). The high reduction potential of Cu2+ and Fe3+ makes the processes of electricity production and metal reduction, to be performed simultaneously in MFC, achievable. The electrical yield measurement during the experiments of anodic organic matter degradation by MFC in treating an artificial wastewater with chemical oxygen demand (COD) 0.6 and 1.6 g O2·dm−3, as initial COD, are given. It is demonstrated that the higher organic load is associated with better electrical yield. A comparison of MFC and conventional anaerobic digestion performance is discussed, as well. Experimental proofs of copper removal and phosphate mobilization, following the iron reduction of FePO4, are also reported.
Bio-electrochemical systems have increasingly become the focus of research due to their potential in environmental biotechnology, particularly in the domains of waste utilization and energy recovery. A prominent method within this domain is the transformation of organic matter into hydrogen via microbial electrolysis cells (MECs). This study offers a thorough analysis of MEC performance, employing exergy analysis and incorporating relevant data from the existing literature. The findings of this research indicate a relationship between process efficiency and effective electron transfer originating from biological oxidation to the cathode reaction, facilitating hydrogen generation. The assessment performed revealed that the exergy efficiency of the process varies by a wide range, depending on conditions such as substrate type and concentration, applied external voltage, and the presence of specific inhibitors. This interplay between substrate concentration, overall efficiency, and energy requirement underlines the complex dynamics of optimizing MEC performance. Our insights provide understanding of the challenges in bio-electrochemical systems, offering implications for their sustainable and efficient use in environmental biotechnology. The theoretical analysis involved assessing the utilization of glucose and glycerol, along with the evaluation of electrical energy consumption and hydrogen yield. Our results demonstrate that a higher applied voltage is associated with greater exergy efficiency. Furthermore, after comparing the use of glucose and glycerol as substrates, our study supports the preferential application of glucose for enhanced efficiency.
1 March 2022 in Journal of the Electrochemical Society
Carbon-based porous materials are most widely used for Microbial Fuel Cells (MFC) based on their unique properties facilitating and allowing the development of high surface area electrode. The electrochemically active layer of the electrode was prepared using two types of catalysts: activated carbon (Norit NK) and activated carbon promoted with CoTMPP (AC/CoTMPP). Mobilization of phosphate ions in the liquid phase was observed during the process of livestock manure treatment. From 20 mg l −1 initially, the concentration of dissolved phosphates reached 100 mg l −1 after 96 h. Increased concentration of ammonium ions in the medium was also observed, indicating ongoing anaerobic mineralization of the organic matter. The processes taking place in the bio electrochemical reactor used result in recovery of nutrients and production of energy. A maximum current density of 140 μ А cm −2 was reached during the MFC operation. The chemical oxygen demand (COD) removal rates were relatively high (above 2 g O 2 /L/h) for both differently catalyzed cathode configurations. As widely reported elsewhere, the electrochemical results confirm that a gas-diffusion electrode using activated carbon catalyst is very well suited as a positive electrode for use in bio electrochemical systems.
1 January 2022 in Journal of the Serbian Chemical Society
Microbial fuel cell (MFC) is a hybrid technology that produces electricity and recovers resources from wastewater through biocatalytic and electrochemical reactions. Metallurgical facilities in Bor, Serbia, are a source of copper-rich metallurgical wastewater, and the Town of Bor is a source of municipal wastewater rich in organic matter. The aim of this paper is to investigate the possibility of application of MFC for the treatment of metallurgical and municipal wastewater that are released into the Bor River in Serbia. A prototype of MFC was constructed for this study, and 3 sets of experiments were performed using model solutions and real wastewater. Copper was successfully removed from the treated model solution with 99.42 % efficiency. Solid copper particles were obtained with a particle size of about 1 ?m. Maximum chemical oxygen demand (COD) removal rate of 191.7 mg L-1 h-1 was observed in the anodic compartment. The impact of this study is significant because MFC was implemented for the simultaneous treatment of two types of wastewaters, one containing metals and the other containing organic matter, and both types of wastewater are released into the same river.