Wireless sensor networks (WSNs) can be used in agriculture to provide farmers with a large amount of information. Precision agriculture (PA) is a management strategy that employs information technology to improve quality and production. Utilizing wireless sensor technologies and management tools can lead to a highly effective, green agriculture. Based on PA management, the same routine to a crop regardless of site environments can be avoided. From several perspectives, field management can improve PA, including the provision of adequate nutrients for crops and the wastage of pesticides for the effective control of weeds, pests, and diseases. This review outlines the recent applications of WSNs in agriculture research as well as classifies and compares various wireless communication protocols, the taxonomy of energy-efficient and energy harvesting techniques for WSNs that can be used in agricultural monitoring systems, and comparison between early research works on agriculture-based WSNs. The challenges and limitations of WSNs in the agricultural domain are explored, and several power reduction and agricultural management techniques for long-term monitoring are highlighted. These approaches may also increase the number of opportunities for processing Internet of Things (IoT) data.

Traditional power supply cords have become less important because they prevent large-scale utilization and mobility. In addition, the use of batteries as a substitute for power cords is not an optimal solution because batteries have a short lifetime, thereby increasing the cost, weight, and ecological footprint of the hardware implementation. Their recharging or replacement is impractical and incurs operational costs. Recent progress has allowed electromagnetic wave energy to be transferred from power sources (i.e., transmitters) to destinations (i.e., receivers) wirelessly, the so-called wireless power transfer (WPT) technique. New developments in WPT technique motivate new avenues of research in different applications. Recently, WPT has been used in mobile phones, electric vehicles, medical implants, wireless sensor network, unmanned aerial vehicles, and so on. This review highlights up-to-date studies that are specific to near-field WPT, which include the classification, comparison, and potential applications of these techniques in the real world. In addition, limitations and challenges of these techniques are highlighted at the end of the article.

Drones can be used in agriculture applications to monitor crop yield and climate conditions and to extend the communication range of wireless sensor networks in monitoring areas. However, monitoring the climate conditions in agriculture applications faces challenges and limitations, such as drone flight time, power consumption, and communication distance, which are addressed in this study. Wireless power transfer (WPT) can be used to charge drone batteries. WPT using a magnetic resonant coupling (MRC) technique was considered in this study because it allows high transfer power and efficiency with tens of centimeters, power transfers can be achieved in misalignment situations, charging several devices simultaneously, and unaffected by weather conditions. WPT was practically implemented based on a solar cell using a proposed flat spiral coil (FSC) in the transmitter circuit and multiturn coil (MTC) in a receiver circuit (drone) for the alignment and misalignment of two coils at different distances. FSC and MTC improved power transfer and efficiency to 20.46 W and 85.25%, respectively, at 0 cm with the loaded system under alignment condition. In addition, the two coils achieved appropriate transfer efficiencies and power for charging the drone battery under misaligned conditions. The maximum power transfer and efficiency were 17.1 W and 71% for the misalignment condition, at an air gap of 1 cm between two coils when the system was loaded with the drone battery. Moreover, the battery life of the drone was extended to 851 minutes based on the proposed sleep/active strategy relative to the traditional operation (i.e., 25.84 minutes). Consequently, a 96.9% battery power saving was achieved based on this strategy. Comparison results showed that the proposed system outperformed some present techniques in terms of the transfer power, transfer efficiency, and drone battery life. The proposed WPT technique developed in this study has been proven to solve the misalignment issue. Thus it offers a great opportunity as a key deployment component for the automation of farming practices toward the Internet of Farming applications.

Wireless sensor networks (WSNs) have received significant attention in the last few years in the agriculture field. Among the major challenges for sensor nodes’ deployment in agriculture is the path loss in the presence of dense grass or the height of trees. This results in degradation of communication link quality due to absorption, scattering, and attenuation through the crop’s foliage or trees. In this study, two new path-loss models were formulated based on the MATLAB curve-fitting tool for ZigBee WSN in a farm field. The path loss between the router node (mounted on a drone) and the coordinator node was modeled and derived based on the received signal strength indicator (RSSI) measurements with the particle swarm optimization (PSO) algorithm in the farm field. Two path-loss models were formulated based on exponential (EXP) and polynomial (POLY) functions. Both functions were combined with PSO, namely, the hybrid EXP-PSO and POLY-PSO algorithms, to find the optimal coefficients of functions that would result in accurate path-loss models. The results show that the hybrid EXP-PSO and POLY-PSO models noticeably improved the coefficient of determination (R2) of the regression line, with the mean absolute error (MAE) found to be 1.6 and 2.7 dBm for EXP-PSO and POLY-PSO algorithms. The achieved R2 in this study outperformed the previous state-of-the-art models. An accurate path-loss model is essential for smart agriculture application to determine the behavior of the propagated signals and to deploy the nodes in the WSN in a position that ensures data communication without unnecessary packets’ loss between nodes.

Falls are the main source of injury for elderly patients with epilepsy and Parkinson’s disease. Elderly people who carry battery powered health monitoring systems can move unhindered from one place to another according to their activities, thus improving their quality of life. This paper aims to detect when an elderly individual falls and to provide accurate location of the incident while the individual is moving in indoor environments such as in houses, medical health care centers, and hospitals. Fall detection is accurately determined based on a proposed sensor-based fall detection algorithm, whereas the localization of the elderly person is determined based on an artificial neural network (ANN). In addition, the power consumption of the fall detection system (FDS) is minimized based on a data-driven algorithm. Results show that an elderly fall can be detected with accuracy levels of 100% and 92.5% for line-of-sight (LOS) and non-line-of-sight (NLOS) environments, respectively. In addition, elderly indoor localization error is improved with a mean absolute error of 0.0094 and 0.0454 m for LOS and NLOS, respectively, after the application of the ANN optimization technique. Moreover, the battery life of the FDS is improved relative to conventional implementation due to reduced computational effort. The proposed FDS outperforms existing systems in terms of fall detection accuracy, localization errors, and power consumption.

When localizing wireless sensor networks (WSNs), estimating the distances of sensor nodes according to the known locations of the anchor nodes remains a challenge. As nodes may transfer from one place to another, a localization technique that can measure or determine the location of a mobile node is necessary. In this paper, the distance between a bicycle when moves on the cycling track and a coordinator node (i.e., coach), which positioned on the middle of the cycling field was estimated for the indoor and outdoor velodromes. The distance was determined based on two methods. First, the raw estimate is done by using the Log-Normal Shadowing Model (LNSM) and later, the intelligence technique, based on Adaptive Neural Fuzzy Inference System (ANFIS) is applied to improve the distance estimation accuracy, especially in an indoor environment, which the signal is severely dominated by the effect of wireless multipath impairments. The received signal strength indicator (RSSI) from anchor nodes based on ZigBee wireless protocol are employed as inputs to the ANFIS and LNSM. In addition, the parameters of the propagation channel, such as standard deviation and path loss exponent were measured. The results shown that the distance estimation accuracy was improved by 84% and 99% for indoor and outdoor velodromes, respectively, after applying the ANFIS optimization, relative to the rough estimate by the LNSM method. Moreover, the proposed ANFIS technique outperforms the previous studies in terms of errors of estimated distance with minimal mean absolute error (MAE) of 0.023 m (outdoor velodrome) and 0.283 m (indoor velodrome).