Ruizhi Shi

Dr. Ruizhi Shi


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 January 2023 in Coatings
Verified
Journal Article
Open access
PDF file
JCJilei Chao
Jilei Chao
RSRuizhi Shi
Ruizhi Shi
FCFuqiang Chu
Fuqiang Chu
YGYanling Guo
Yanling Guo
QDQian Deng
Qian Deng
BSBing Sun
Bing Sun
As a functional decorative material on the surface of printing and packaging, coating plays the role of increasing gloss, wear resistance, and antifouling. It has broad application prospects in high-end printed materials such as posters, art reproductions, and maps. In this paper, dodecafluoroheptyl methacrylate was used as the fluorine-containing monomer, which was used to modify the epoxy resin and introduce fluoride first. Under the action of polymerization inhibitor and catalyst, the epoxy resin was further modified by ring opening, esterification, and neutralization with acrylic acid, maleic anhydride, and organic base as raw materials. Additionally, a fluorine-containing coating with hydrophobic and oleophobic properties was obtained finally. The effects of fluorine modification of epoxy resin and synthetic polymer were characterized by infrared spectrometer and photoelectron spectroscopy. The results showed that fluorine monomer could be successfully grafted to the molecular body of epoxy resin, and fluorine had been introduced into the surface of the polymer film. Using the contact angle tester, combined with the performance parameters such as grafting rate, thermal stability, adhesion, and gloss, the effects of the amount of fluorine monomer on the properties of the synthetic coating were discussed. The results showed that the hydrophobic and oleophobic properties of the copolymer film surface were closely related to the amount of fluorine monomer. When the molar ratio of the epoxy group to dodecafluoroheptyl methacrylate was 26:1, the mass fraction of fluorine on the film surface was 18.09%, and the contact angles of water and ethylene glycol were 121.8° and 78.2° respectively. At the same time, the printability of self-made hydrophobic and oleophobic coating was tested in this paper. The liquid repellency of inkjet printing before and after glazing and the influence of the coating on the optical properties of printed images were discussed and studied too. The results showed that the coating synthesized by the experiment was suitable for inkjet printing. It had improved the printing quality performance and the functional modification on the surface of inkjet printings, such as liquid repellency, gloss, and color reproduction.

8 March 2022 in Coatings
Verified
Journal Article
Open access
PDF file
JCJilei Chao
Jilei Chao
RSRuizhi Shi
Ruizhi Shi
YGYanling Guo
Yanling Guo
FCFuqiang Chu
Fuqiang Chu
JCJilei Chao
Jilei Chao
As an environmentally friendly coating, waterborne coatings have broad application prospects in paper packaging products in food and medicine. In this paper, a waterborne coating is synthesized from epoxy resin, polypropylene glycol diglycidyl ether, acrylic acid, trimellitic anhydride, maleic anhydride, and organic amine by three steps: ring opening reaction, esterification reaction, and neutralization reaction. Using viscosity, particle size, thermal stability, adhesion, and friction resistance as performance evaluation factors, the effects of the ratios of epoxy resin and polypropylene glycol diglycidyl ether in the polymerization system on the performance of synthetic waterborne coatings were discussed. Taking water solubility, water absorption, and water resistance as performance evaluation factors, the effects of the amount of ratio of anhydride groups to hydroxyl groups in the epoxy acrylic resin, which were produced in the second step of the reaction, were considered on the performance of synthetic waterborne coatings. The experimental results showed that when the molar ratio of the epoxy group in the epoxy resin and polypropylene glycol diglycidyl ether was about 1:1, and the molar ratio of anhydride in maleic anhydride to hydroxyl in the epoxy acrylic resin generated in the second step of reaction was about 0.9:1, the performance of the prepared waterborne coatings was comprehensively better. At the same time, the applicability of self-made waterborne coatings was tested. The results showed that when the coating amount was about 3.60 g/m2, the properties of the packaging base paper were greatly improved with respect to air resistance, oxygen resistance, oil resistance, and color reproducibility.

17 January 2018 in Lecture Notes in Electrical Engineering
Verified
Book Chapter
Closed access
PDF file
HYHui Ye
Hui Ye
RSRuizhi Shi
Ruizhi Shi
SLShenghui Li
Shenghui Li

17 January 2018
Verified
Book Chapter
Closed access
PDF file
SLShenghui Li
Shenghui Li
RSRuizhi Shi
Ruizhi Shi
HYHui Ye
Hui Ye


26 May 2021
Verified
Book Chapter
Closed access
PDF file
JCJilei Chao
Jilei Chao
RSRuizhi Shi
Ruizhi Shi
YGYanling Guo
Yanling Guo
FCFuqiang Chu
Fuqiang Chu
QDQian Deng
Qian Deng