Jilei Chao

Dr. Jilei Chao


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 January 2023 in Coatings
Verified
Journal Article
Open access
PDF file
JCJilei Chao
Jilei Chao
RSRuizhi Shi
Ruizhi Shi
FCFuqiang Chu
Fuqiang Chu
YGYanling Guo
Yanling Guo
QDQian Deng
Qian Deng
BSBing Sun
Bing Sun
As a functional decorative material on the surface of printing and packaging, coating plays the role of increasing gloss, wear resistance, and antifouling. It has broad application prospects in high-end printed materials such as posters, art reproductions, and maps. In this paper, dodecafluoroheptyl methacrylate was used as the fluorine-containing monomer, which was used to modify the epoxy resin and introduce fluoride first. Under the action of polymerization inhibitor and catalyst, the epoxy resin was further modified by ring opening, esterification, and neutralization with acrylic acid, maleic anhydride, and organic base as raw materials. Additionally, a fluorine-containing coating with hydrophobic and oleophobic properties was obtained finally. The effects of fluorine modification of epoxy resin and synthetic polymer were characterized by infrared spectrometer and photoelectron spectroscopy. The results showed that fluorine monomer could be successfully grafted to the molecular body of epoxy resin, and fluorine had been introduced into the surface of the polymer film. Using the contact angle tester, combined with the performance parameters such as grafting rate, thermal stability, adhesion, and gloss, the effects of the amount of fluorine monomer on the properties of the synthetic coating were discussed. The results showed that the hydrophobic and oleophobic properties of the copolymer film surface were closely related to the amount of fluorine monomer. When the molar ratio of the epoxy group to dodecafluoroheptyl methacrylate was 26:1, the mass fraction of fluorine on the film surface was 18.09%, and the contact angles of water and ethylene glycol were 121.8° and 78.2° respectively. At the same time, the printability of self-made hydrophobic and oleophobic coating was tested in this paper. The liquid repellency of inkjet printing before and after glazing and the influence of the coating on the optical properties of printed images were discussed and studied too. The results showed that the coating synthesized by the experiment was suitable for inkjet printing. It had improved the printing quality performance and the functional modification on the surface of inkjet printings, such as liquid repellency, gloss, and color reproduction.

13 December 2024 in Coatings
Verified
Journal Article
Open access
PDF file
FCFuqiang Chu
Fuqiang Chu
HZHaikuo Zhang
Haikuo Zhang
XZXu Zhou
Xu Zhou
YFYuhang Fu
Yuhang Fu
HDHang Dong
Hang Dong
XWXin Wang
Xin Wang
In this work, a coating method was used to prepare a liquid crystal physical gel with a high orientation of liquid crystal molecules, excellent electrical conductivity, and mechanical stability. The liquid crystal matrix used was nematic phase liquid crystal (5CB), the gel factor was polyvinyl alcohol (PVA), and the conductive filler was carbon nanotubes/polyaniline (CNT/PANI). Chemical in situ polymerization was used to create CNT/PANI composites, wherein polyaniline encapsulates the carbon nanotubes to enhance their dispersion. At 4 mm/s, 7.2 N of coating pressure, and 72 s of interval duration, the shear flow-induced orientation was achieved. The consistent and large-area orientation of the liquid crystal molecules was realized and the orientation direction of the liquid crystal molecules was parallel to the coating direction. Additionally, a type of stress sensor assembly based on multiple coating demonstrated a good sensor performance in the 90° bending test and high sensitivity in the 20% tensile test, with a sensor sensitivity of 23.25. Regarding the use of liquid crystal materials in flexible electronic devices, it is quite important.

8 March 2022 in Coatings
Verified
Journal Article
Open access
PDF file
JCJilei Chao
Jilei Chao
RSRuizhi Shi
Ruizhi Shi
YGYanling Guo
Yanling Guo
FCFuqiang Chu
Fuqiang Chu
JCJilei Chao
Jilei Chao
As an environmentally friendly coating, waterborne coatings have broad application prospects in paper packaging products in food and medicine. In this paper, a waterborne coating is synthesized from epoxy resin, polypropylene glycol diglycidyl ether, acrylic acid, trimellitic anhydride, maleic anhydride, and organic amine by three steps: ring opening reaction, esterification reaction, and neutralization reaction. Using viscosity, particle size, thermal stability, adhesion, and friction resistance as performance evaluation factors, the effects of the ratios of epoxy resin and polypropylene glycol diglycidyl ether in the polymerization system on the performance of synthetic waterborne coatings were discussed. Taking water solubility, water absorption, and water resistance as performance evaluation factors, the effects of the amount of ratio of anhydride groups to hydroxyl groups in the epoxy acrylic resin, which were produced in the second step of the reaction, were considered on the performance of synthetic waterborne coatings. The experimental results showed that when the molar ratio of the epoxy group in the epoxy resin and polypropylene glycol diglycidyl ether was about 1:1, and the molar ratio of anhydride in maleic anhydride to hydroxyl in the epoxy acrylic resin generated in the second step of reaction was about 0.9:1, the performance of the prepared waterborne coatings was comprehensively better. At the same time, the applicability of self-made waterborne coatings was tested. The results showed that when the coating amount was about 3.60 g/m2, the properties of the packaging base paper were greatly improved with respect to air resistance, oxygen resistance, oil resistance, and color reproducibility.

4 January 2025 in Coatings
Verified
Journal Article
Open access
PDF file
FCFuqiang Chu
Fuqiang Chu
HDHang Dong
Hang Dong
JCJilei Chao
Jilei Chao
SWShuo Wang
Shuo Wang
BSBing Sun
Bing Sun
QHQiqi Huang
Qiqi Huang
This study employs 3-aminopropyltriethoxysilane (APTS) to eliminate the hydrophilic hydroxyl groups on the surface of silica, followed by the use of defunctionalized silica as a filler and boric acid (BA) as a crosslinking agent to prepare a polyvinyl alcohol (PVA)/silica coating. The experimental results indicate that the coating not only reduces the inherent hydrophilicity of PVA, but also enhances the uniformity and film forming properties of the coating, providing a solid foundation for patterning leather surfaces. The characterization results show that, when the mass ratio of silica-APTS is 3.0 wt% and boric acid is 2.0 wt%, the resulting coating exhibits stable physical properties, low water absorption, moderate viscosity, and excellent smoothness. Moreover, it forms a dense film on a leather surface, effectively covering pores and smoothing the texture. Furthermore, directly printing on the modified leather surface enables the creation of clear patterns that meet the requirements for fine printing, offering an experimental basis for developing leather surface coatings with superior water resistance and printability.

15 February 2024 in Pacific International Journal
Verified
Journal Article
Open access
PDF file
JCJilei Chao
Jilei Chao
With the rapid development of new technologies such as mobile internet, big data, and artificial intelligence, new media has become an important force in the communication field. It is imperative to build a complete undergraduate teaching system of new media technology and cultivate versatile talents to meet the needs of industry development. Taking the majors of new media technology and new media (big data news communication direction) at Qilu University of Technology as an example, this study analyzes the issues in talent training objectives, curriculum setting, teaching content and teaching methods through literature review, questionnaires and interviews. It is proposed to build a modularized and flexible curriculum system oriented to ability training, increase cutting-edge new media technology courses, and strengthen the cultivation of software and hardware platform application abilities. In terms of teaching methods, project-driven teaching methods are implemented, distinctive project training courses are set up to promote knowledge application and comprehensive ability training. The research shows that building an open, flexible undergraduate teaching system of new media technology that emphasizes cross integration will help improve the quality of talent cultivation and enable talents to better meet the needs of new media industry development. This study provides theoretical support and practical approaches for promoting the teaching reform of the new media technology major.