A new manufacturing paradigm is showcased to exclude conventional mold‐dependent manufacturing of pressure sensors, which typically requires a series of complex and expensive patterning processes. This mold‐free manufacturing leverages high‐resolution 3D‐printed multiscale microstructures as the substrate and a gas‐phase conformal polymer coating technique to complete the mold‐free sensing platform. The array of dome and spike structures with a controlled spike density of a 3D‐printed substrate ensures a large contact surface with pressures applied and extended linearity in a wider pressure range. For uniform coating of sensing elements on the microstructured surface, oxidative chemical vapor deposition is employed to deposit a highly conformal and conductive sensing element, poly(3,4‐ethylenedioxythiophene) at low temperatures (<60 °C). The fabricated pressure sensor reacts sensitively to various ranges of pressures (up to 185 kPa−1) depending on the density of the multiscale features and shows an ultrafast response time (≈36 µs). The mechanism investigations through the finite element analysis identify the effect of the multiscale structure on the figure‐of‐merit sensing performance. These unique findings are expected to be of significant relevance to technology that requires higher sensing capability, scalability, and facile adjustment of a sensor geometry in a cost‐effective manufacturing manner.
Though 3D printing shows potential in fabricating complex optical components rapidly, its poor surface quality and dimensional accuracy render it unqualified for industrial optics applications. The layer steps in the building direction and the pixelated steps on each layer's contour result in inevitable microscale defects on the 3D‐printed surface, far away from the nanoscale roughness required for optics. This paper reports a customized vat photopolymerization‐based lens printing process, integrating unfocused image projection and precision spin coating to solve lateral and vertical stair‐stepping defects. A precision aspherical lens with less than 1 nm surface roughness and 1 µm profile accuracy is demonstrated. The 3D‐printed convex lens achieves a maximum MTF resolution of 347.7 lp mm−1. A mathematical model is established to predict and control the spin coating process on 3D‐printed surfaces precisely. Leveraging this low‐cost yet highly robust and repeatable 3D printing process, the precision fabrication of multi‐scale spherical, aspherical, and axicon lenses are showcased with sizes ranging from 3 to 70 mm using high clear photocuring resins. Additionally, molds are also printed to form multi‐scale PDMS‐based lenses.
4 September 2024 in IEEE Transactions on Reliability
Lifetime distributions, such as Weibull and log-logistic distributions, are critical for parametric and semi-parametric analysis in reliability engineering. This article promotes a promising but understated distribution, q-Weibull distribution, to the reliability engineering community by providing new perspectives and demonstrating potential applications. We interpreted the physical meanings of the parameter “ q ” from multiple perspectives, including internal interactions in nonextensive mechanics, dependence among components in a series system, and the frailty (heterogeneity) in field failure data. Also, we showed that q-Weibull distributions belong to a closed function family under three different operations: minimal ordered statistics, accelerated failure time and proportional hazards for modeling accelerated life test data. Then, q-Weibull distributions are found to be an interpolation between Weibull and log-logistics distributions, and an interpolation between Weibull and Power law distributions. Moreover, this article presented a new approach to estimating parameters more accurately and robustly, by combing maximum likelihood estimation and robust linear regression. Finally, q-Weibull distributions show superior performance for a list of reliability applications, such as modeling lifetime, material strength, accelerated life test, frailty in field failure data, repairable systems, and reliability growth. To promote wider usage of this lifetime distribution, we open source all the codes for parameter estimations and reliability applications and all the datasets collected.
6 August 2021 in Journal of Manufacturing Science and Engineering
Microscale surface structures are commonly found on macroscale bodies of natural creatures for their unique functions. However, it is difficult to fabricate such multi-scale geometry with conventional stereolithography processes that rely on either laser or digital micromirror device (DMD). More specifically, the DMD-based mask projection method displays the image of a cross section of the part on the resin to fabricate the entire layer efficiently; however, its display resolution is limited by the building area. In comparison, the laser-based vector scanning method builds smooth features using a focused laser beam with desired beam-width resolution; however, it has less throughput for its sequential nature. In this paper, we studied the hybrid-light-source stereolithography process that integrates both optical light sources to facilitate the fabrication of macro-objects with microscale surface structures (called micro-textures in the paper). The hardware system uses a novel calibration approach that ensures pixel-level dimensional accuracy across the two light sources. The software system enables designing the distribution and density of specific microscale textures on a macro-object by generating projection images and laser toolpaths for the two integrated light sources. Several test cases were fabricated to demonstrate the capability of the developed process. A large fabrication area (76.8–80.0 mm) with 50 μm micro-features can be achieved with a high throughput.
We present Fluxable, a tool for making custom sensors and actuators 3D printable with customer-grade Stereolithography (SLA) 3D printers. With this tool, the user converts an arbitrary 3D model into a deformable body with integrated helix-and-lattice structures, which comprise a hollow helical channel in the center, lattice paddings, and a wireframe structure on the surface. The tool allows for the parameterization of the helix for sensing performance and customization of the lattice for actuation. By inserting a conductive shape-memory alloy (SMA) into a printed object through the helical channel, the converted shape becomes a sensor to detect various shape-changing behaviors using inductive sensing or an actuator to trigger movements through temperature control. We demonstrated our tool with a series of example sensors and actuators, including an interactive timer, a DJ station, and a caterpillar robot.
29 August 2023 in Journal of Manufacturing Science and Engineering
3D-printed blocks with drop coating could work as diffraction gratings while the layer stepping serves as the grooves of the gratings. This paper reports 3D-printed diffraction gratings coated with different resins. A collimated laser with a wavelength of 520 nm passed through the gratings and generated diffraction patterns. Optical path differences and surface profiles of the samples were measured to analyze the mechanism of the diffraction phenomenon. The as-printed samples had a grating height of about 8 µm induced by layer stepping, which could not generate clear diffraction patterns because of too large optical path difference. After being coated with different resins on the surfaces, the printed samples generated diffraction patterns. We experimentally showed that the magnitude of optical path differences became close to the wavelength of the laser and that the diffraction phenomenon was mainly caused by the difference in the refractive indices between the as-printed part and the drop-coated part. This novel method enables low-cost 3D printers to fabricate diffractive optical elements for visible light.