Hyunjae Park

Mr. Hyunjae Park

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 April 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JSJinha Shin
Jinha Shin
YCYong-Sup Choi
Yong-Sup Choi
HPHyunjae Park
Hyunjae Park
The objective of this study is to investigate the synthesis and influence of MoS2 on carbon nanowalls (CNWs) as supercapacitor electrodes. The synthesis of MoS2 on CNW was achieved by the introduction of hydrogen remote plasma from ammonium tetrathiomolybdate (ATTM) without deterioration of the CNWs. The topographical surface structures and electrochemical characteristics of the MoS2–CNW composite electrodes were explored using two ATTM-dispersed organic solvents—acetonitrile and dimethylformamide (DMF). In this study, CNW and MoS2 were synthesized using an electron cyclotron resonance plasma. However, hydrogen radicals, which transform ATTM into MoS2, were provided in the form of a remote plasma source. The electrochemical performances of MoS2–CNW hybrid electrodes with various morphologies—depending on the solvent and ATTM concentration—were evaluated using a three-electrode system. The results revealed that the morphology of the synthesized MoS2 was influenced by the organic solvent used and affected both the electrochemical performance and topographical characteristics. Notably, considerable enhancement of the specific capacitance was observed for the MoS2 with open top edges synthesized from DMF. These encouraging results may motivate additional research on hybrid supercapacitor electrodes and the rapid synthesis of MoS2 and other transition metal dichalcogenides.

29 June 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
IKIn Je Kang
In Je Kang
CCChang-Hyun Cho
Chang-Hyun Cho
HCHyonu Chang
Hyonu Chang
SJSoo-Ouk Jang
Soo-Ouk Jang
HPHyunjae Park
Hyunjae Park
JKJi Hun Kim
Ji Hun Kim
To validate the possibility of the developed microwave plasma source with a novel structure for plasma aerosol deposition, the characteristics of the plasma flow velocity generated from the microwave plasma source were investigated by a Mach probe with pressure variation. Simulation with the turbulent model was introduced to deduce calibration factor of the Mach probe and to compare experimental measurements for analyses of collisional plasma conditions. The results show calibration factor does not seem to be a constant parameter and highly dependent on the collision parameter. The measured plasma flow velocity, which witnessed fluctuations produced by a shock flow, was between 400 and 700 m/s. The optimized conditions for microwave plasma assisted aerosol deposition were derived by the results obtained from analyses of the parameters of microwave plasma jet. Under the optimized conditions, Y2O3 coatings deposited on an aluminum substrate were investigated using scanning electron microscope. The results presented in this study show the microwave plasma assisted aerosol deposition with the developed microwave plasma source is highly feasible for thick films with >50 μm.

8 April 2022 in Current Applied Physics
Verified
Journal Article
Closed access
IKIn Je Kang
In Je Kang
HCHyonu Chang
Hyonu Chang
YCYong-Sup Choi
Yong-Sup Choi
SJSoo Ouk Jang
Soo Ouk Jang
CCChang Hyun Cho
Chang Hyun Cho
HPHyunjae Park
Hyunjae Park

2 December 2022 in Ceramics
Verified
Journal Article
Open access
PDF file
SJSoo-Ouk Jang
Soo-Ouk Jang
CCChanghyun Cho
Changhyun Cho
JKJi Hun Kim
Ji Hun Kim
IKIn Je Kang
In Je Kang
HCHyonu Chang
Hyonu Chang
HSHye Won Seok
Hye Won Seok
To improve plasma and chemical resistance on various vacuum components used for semiconductor manufacturing equipment, various ceramic coating techniques have been applied. Among these methods for ceramic coating, the well-known atmospheric plasma spray (APS) is advantageous for providing thick film (100 µm or more) deposition. However, there are problems associated with the phase transition of the coating film and poor film quality due to formation of voids. To solve these problems, the aerosol deposition (AD) method has been developed. This method provides nice ceramic film quality. However, the coating rate is quite slow and has difficulty producing thick films (>30 µm). To overcome these limitations, microwave plasma-assisted aerosol deposition (μ-PAD) is applied at low vacuum conditions without the AD nozzle. This method uses a microwave plasma source during the AD process. After enduring a long-term durability test, as a trial run, μ-PAD has been applied on the actual process site. With the Al2O3 powder, μ-PAD shows a coating rate that is 12 times higher than the AD method. In addition, the formation of a thicker film (96 µm) deposition has been demonstrated. On the other hand, the coating film hardness, porosity, adhesion, and withstand voltage characteristics were confirmed to be less than the AD method.

12 February 2024 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
HPHyunjae Park
Hyunjae Park
SJSoo Ouk Jang
Soo Ouk Jang
JSJin-Ha Shin
Jin-Ha Shin
KLKang Il Lee
Kang Il Lee
YCYong Sup Choi
Yong Sup Choi
We synthesized carbon nanowall (CNW) films on a copper substrate using an upgraded ReSLAN plasma source. The morphology and structural characteristics of CNWs synthesized according to the position of the copper substrate ( XY plane and ZX plane) were analyzed using FE-SEM and Raman spectroscopy. When synthesized in the ZX plane, it was possible to achieve a surface area synthesis of 450 mm, but the uniformity of the CNWs film synthesized between the slits and magnets was low. The CNW film synthesized in the XY plane had a smaller area, approximately 60 $\times$ 240 mm, compared to the ZX plane synthesis, but it exhibited a very good uniformity with a graphitization uniformity of 5.8%. We propose a roll-to-roll process system for continuous CNWs synthesis to be conducted in the future.