Bruno Diogo Tibúrcio

Mr. Bruno Diogo Tibúrcio

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 July 2022 in Energies
Verified
Journal Article
Open access
PDF file
DGDário Machado Garcia
Dário Machado Garcia
Dawei LiangDawei Liang
Dawei Liang
CVCláudia R. Vistas
Cláudia R. Vistas
HCHugo Costa
Hugo Costa
MCMiguel Trindade Catela
Miguel Trindade Catela
JAJoana Almeida
Joana Almeida
The efficiency potential of a small-size solar-pumped laser is studied here. The solar laser head was composed of a fused silica aspheric lens and a conical pump cavity, which coupled and redistributed the concentrated solar radiation from the focal zone of a parabolic mirror with an effective collection area of 0.293 m2 to end-side pump a Ce (0.1 at%):Nd (1.1 at%):YAG rod of 2.5 mm diameter and 25 mm length. Optimum solar laser design parameters were found through Zemax© non-sequential ray-tracing and LASCAD™ analysis. The utilization of the Ce:Nd:YAG medium with small diameter pumped by a small-scale solar concentrator was essential to significantly enhance the end-side pump solar laser efficiency and thermal performance. For 249 W incoming solar power at an irradiance of 850 W/m2, 11.2 W multimode solar laser power was measured, corresponding to the record solar-to-laser power conversion efficiency of 4.50%, being, to the best of our knowledge, 1.22 times higher than the previous record. Moreover, the highest solar laser collection efficiency of 38.22 W/m2 and slope efficiency of 6.8% were obtained, which are 1.18 and 1.02 times, respectively, higher than the previous records. The lowest threshold solar power of a Ce:Nd:YAG solar-pumped laser is also reported here.

13 May 2022 in Energies
Verified
Journal Article
Open access
PDF file
CVCláudia R. Vistas
Cláudia R. Vistas
Dawei LiangDawei Liang
Dawei Liang
DGDário Machado Garcia
Dário Machado Garcia
MCMiguel Trindade Catela
Miguel Trindade Catela
Bruno Diogo TibúrcioBruno Diogo Tibúrcio
Bruno Diogo Tibúrcio
JAJoana Almeida
Joana Almeida
The Ce:Nd:YAG is a recent active medium in solar-pumped lasers with great potential. This study focuses on the influence of two secondary concentrators: a fused silica aspherical lens and a rectangular fused silica light guide; and consequent pump light distribution on the output performance of a Ce:Nd:YAG side-pumped solar laser. The solar laser head with the aspherical lens concentrated the incident pump light on the central region of the rod, producing the highest continuous-wave 1064 nm solar laser power of 19.6 W from the Ce:Nd:YAG medium. However, the non-uniformity of the absorbed pump profile produced by the aspherical lens led to the rod fracture because of the high thermal load, limiting the maximum laser power. Nevertheless, the solar laser head with the light guide uniformly spread the pump light along the laser rod, minimizing the thermal load issues and producing a maximum laser power of 17.4 W. Despite the slight decrease in laser power, the use of the light guide avoided the laser rod fracture, demonstrating its potential to scale to higher laser power. Therefore, the pumping distribution on the rod may play a fundamental role for Ce:Nd:YAG solar laser systems design.

29 May 2022 in Energies
Verified
Journal Article
Open access
PDF file
JAJoana Almeida
Joana Almeida
Dawei LiangDawei Liang
Dawei Liang
DGDário Machado Garcia
Dário Machado Garcia
Bruno Diogo TibúrcioBruno Diogo Tibúrcio
Bruno Diogo Tibúrcio
HCHugo Costa
Hugo Costa
CVCláudia R. Vistas
Cláudia R. Vistas
The solar laser power scaling potential of a side-pumped Ce:Nd:YAG solar laser through a rectangular fused silica light guide was investigated by using a 2 m diameter parabolic concentrator. The laser head was formed by the light guide and a V-shaped pump cavity to efficiently couple and redistribute the concentrated solar radiation from the parabolic mirror to a 4 mm diameter, 35 mm length Ce(0.1 at.%):Nd(1.1 at.%):YAG laser rod. The rectangular light guide ensured a homogeneous distribution of the solar radiation along the laser rod, allowing it to withstand highly concentrated solar energy. With the full collection area of the parabolic mirror, the maximum continuous wave (cw) solar laser power of 40 W was measured. This, to the best of our knowledge, corresponds to the highest cw laser power obtained from a Ce:Nd:YAG medium pumped by solar radiation, representing an enhancement of two times over that of the previous side-pumped Ce:Nd:YAG solar laser and 1.19 times over the highest Cr:Nd:YAG solar laser power with a rectangular light-guide. This research proved that, with an appropriate pumping configuration, the Ce:Nd:YAG medium is very promising for scaling solar laser output power to a higher level.

1 August 2018 in Optics Communications
Verified
Journal Article
Closed access
RMR. Matos
R. Matos
Dawei LiangDawei Liang
Dawei Liang
JAJoana Almeida
Joana Almeida
Bruno Diogo TibúrcioBruno Diogo Tibúrcio
Bruno Diogo Tibúrcio
CVCláudia R. Vistas
Cláudia R. Vistas

1 June 2021 in Journal of Solar Energy Engineering
Verified
Journal Article
Closed access
PDF file
Dawei LiangDawei Liang
Dawei Liang
JAJoana Almeida
Joana Almeida
Bruno Diogo TibúrcioBruno Diogo Tibúrcio
Bruno Diogo Tibúrcio
MCMiguel Trindade Catela
Miguel Trindade Catela
DGDário Machado Garcia
Dário Machado Garcia
CVCláudia R. Vistas
Cláudia R. Vistas
A seven-rod/seven-TEM00 mode beam Fresnel lens solar laser pumping approach is here proposed. The Fresnel lens with 4.0 m2 collection area was used as the primary solar concentrator to pump seven 2.5 mm diameter, 15 mm length Nd:YAG rods within a conical pump cavity through a secondary fused silica aspheric concentrator. Within the pump cavity, solar pump rays not completely absorbed by one of the seven rods were furtherly absorbed by other rods, ensuring hence a high absorption efficiency and avoiding the serious thermal lensing and thermal stress issues associated with classical large rod solar lasers. Seven individual plane-concave large-mode resonators were adopted to enable a good overlap between solar pump mode and TEM00 laser oscillating mode. By using both zemax® and lascad® software, the maximum total TEM00 mode solar laser power of 54.65 W was numerically calculated by optimizing the radius parameter of the Fresnel lens, the diameter of the laser rod, and the radius of curvature of the laser resonator output mirror. TEM00 mode solar laser collection efficiency of 13.66 W/m2 and solar power-to-TEM00 mode laser power conversion efficiency of 1.44% were calculated, representing substantial enhancements of 4.66 times and 4.38 times, respectively, as compared with previous experimental records of the TEM00 mode solar laser pumped through a Fresnel lens with 0.785 m2 collection area. The feasibility of TEM00 mode solar laser power delivery by hollow-core photonic crystal fibers was finally studied.

2 December 2022 in Energies
Verified
Journal Article
Open access
PDF file
HCHugo Costa
Hugo Costa
Dawei LiangDawei Liang
Dawei Liang
JAJoana Almeida
Joana Almeida
MCMiguel Trindade Catela
Miguel Trindade Catela
DGDário Machado Garcia
Dário Machado Garcia
CVCláudia R. Vistas
Cláudia R. Vistas
A seven-rod solar laser head was conceptualized and numerically studied to improve the tracking error compensation capacity and power stability in end-side-pumping schemes. It was composed of a first-stage heliostat–parabolic mirror system, a second-stage fused silica aspheric lens and a third-stage conical pumping cavity, within which seven Nd:YAG rods were mounted. Highly stable solar laser emission, with a power loss inferior to 5% for tracking errors up to ±0.4°, could potentially be enabled with seven 4 mm diameter, 13 mm length rods. The tracking error width at 10% laser power loss was about 1.0°, which is 1.65 times higher than the experimental record, attained by a dual-rod side-pumping prototype. Furthermore, a total multimode laser power of about 41.2 W could also be achieved, corresponding to 23.3 W/m2 collection and 2.5% solar-to-laser power conversion efficiencies, which are 1.65 and 1.36 times higher than those obtained with the dual-rod side-pumping prototype. They are also 1.27 and 1.12 times higher than the multirod experimental records in multimode regime for the same rod material.