The international safety regulations are pushing the manufacturers of water systems and equipment to remove lead from material compositions due to the potential human hazard of lead absorption. The usage of green lead-free brass alloys is becoming mandatory in many important markets, demanding the manufacturers to quickly adapt their production techniques both casting and machining to this new reality. Regarding machining, lead has been used to facilitate the chip control, working as a natural chip breaker and reducing the tool wear. Therefore, the reduction of lead composition in brass alloys contributes to a machinability decrease of the materials leading to higher cutting forces, long chips and higher tool wear. This work focuses on the machinability characterization of three different brass alloys (leaded, medium-leaded and minimally leaded) by means of cylindrical external turning process with polycrystalline diamond inserts. A parametric study covering three different depths of cuts, three feed rates and four cutting speeds was conducted for three brass alloys with two repetitions. Cutting forces, chip morphology and surface roughness were analysed and compared between alloys. Complementary microstructural and mechanical characterization of the alloys were performed. Analysis of variance was performed to analyse the results. Cutting forces, power consumption, specific cutting pressure, roughness and chip morphology identification were used as comparison criteria among the tested materials. Results have demonstrated the decrease of machinability with the lead reduction, with higher cutting forces and longer chips. Polycrystalline diamond tools used in this work could be a good option to overcome the machinability challenges of the lead-free brass alloys.
3 June 2023 in The International Journal of Advanced Manufacturing Technology
Metal additive manufacturing (MAM) currently allows the production of mechanical components with technical specifications suitable for structural applications with a high level of complexity. Despite the most recent technological developments, additively manufactured parts may still lack the geometrical and dimensional accuracy as well as surface integrity required for precision mechanical assemblies and system reliability. These requirements often lead to post-processing operations through precision machining technologies. The present work focuses on the machinability study of 18Ni300 maraging steel obtained by laser powder bed fusion and its comparison with the conventional counterpart. Milling tests were carried out covering a wide range of cutting parameters, aiming at understanding their influence and comparing the obtained results in terms of cutting force, specific cutting pressure, roughness and chip morphology. In depth residual stresses have been measured for different operational and metallurgical conditions and their comparison was performed. A more significant effect of the feed parameter on the analysed data is noticed, particularly regarding the affected layer depth of the residual stresses due to cutting. Moreover, the higher mechanical strength of the additively manufactured alloy does not translate into an equivalent increase in the required average specific cutting pressure.
Fibre metal laminates (FML) are significantly adopted in the aviation industry due to their convenient combination of specific strength, impact resistance and ductility. Drilling of such materials is a regular pre-requisite which enables assembly operations, typically through rivet joining. However, the hole-making operation is of increased complexity due to the dissimilarity of the involved materials, often resulting in defects (i.e., material interface delamination), which can significantly compromise the otherwise excellent fatigue strength. This work explores the potential of three different drill geometries, operating under variable cutting speeds and feeds on CFRP-AA laminates. In addition, the usage of sacrificial back support is investigated and cutting load, surface roughness and delamination extension are examined. In order to predict delamination occurrence, ADCB tests are performed, enabling the calculation of fracture energy threshold. Drill geometry presents a very significant influence on delamination occurrence. The usage of specific step-tools with secondary cutting edge showed superior performance. Despite its simplicity, the applied critical force threshold model was able to successfully predict interface delamination with good accuracy.
Inconel 718 is a highly valued material in the aerospace and nuclear industries due to the fact of its exceptional properties. However, the processing of this material is quite difficult, especially through machining processes. Machining this material results in rapid tool wear, even when low material removal rates are considered. In this study, instrumented turning experiments were employed to evaluate the machinability of Inconel 718 alloy using PCBN tools while assessing the usage of two distinct binder phases, TiN and TiC, for those cutting tools. It was found that the tool life was highly sensitive to the cutting speeds but also affected by the workpiece mechanical properties. At lower cutting speeds, notch wear significantly impacted the tool integrity, whereas at higher cutting speeds, flank wear was the primary failure mode of the tool. The flank wear of the tools with TiN-based binder outperformed TiC by almost 30%, presenting a more consistent behavior when machining.