In this paper, a low-profile flexible dual-band quasi-isotropic antenna based on half-wavelength crossed dipoles is developed for unmanned aerial vehicle (UAV) applications. Specifically, to decrease the antenna profile, a coaxial structure is used to feed the antenna and no external balun is applied. Theoretical and numerical analyses of the designed antenna were conducted. To validate the design concept, an antenna prototype was fabricated and characterized. Good agreements have been observed between simulations and measurements. The measured radiation patterns show that the gain deviations across the whole spherical radiation surface are less than 7.5 dBi at 2.4 GHz and less than 8.7 dBi at 4.6 GHz. For the purpose of system demonstration, a 2 × 2 MIMO system employing the proposed antenna was assembled. The resulting dual-band MIMO system was deployed on a UAV for ground test, validating its potential for performance improvement of UAV communications.
In this paper, we analyze quantum selection rules of intersubband transitions in quantum dots (QDs) and determine their impact on plasmonic enhancement in quantum dot infrared photodetectors (QDIPs). Photoluminescence and photocurrent spectrum measurement were performed on QD samples with different doping levels to identify the QD energy levels and associate the photodetection peaks with the intersubband transitions. The quantum selection rules of the intersubband transitions are determined by the electric-dipole interaction. To determine the impact of quantum selection rules on the plasmonic enhancement, we fabricated metallic two-dimensional subwavelength hole array (2DSHA) plasmonic structures with different periods on QDIPs for specific plasmonic enhancement of individual intersubband transitions. We found that the plasmonic enhancement ratios of different intersubband transitions are not the same. The unequal enhancement ratios are attributed to the quantum selection rules in the intersubband transitions and the dominant electric field (E-field E→) vectors induced by the 2DSHA plasmonic structure.
8 July 2020 in IEEE Transactions on Nanotechnology
We have investigated the structural and optical characteristics of planar GaN epitaxial layers on silicon substrates, formed by coalescing an array of GaN nanowires, and of In0.32Ga0.68N/GaN self-organized quantum dots grown on the GaN layer. The as-grown coalesced GaN layer is of the cubic crystalline form, with a large density of stacking faults, that transforms to the wurtzite form, devoid of most of the stacking faults, upon post-growth annealing. Multiple layers of the quantum dots emit at 550 nm. Temperature-dependent and time-resolved photoluminescence measurements have been made to determine the temperature dependent radiative and non-radiative lifetimes of the quantum dots.
Incorporating active components in photonic structures with a topological configuration has been shown to achieve lasing at topological edge states. Here, we report an electrically tunable topological edge-state laser in a one-dimensional complex Su–Schrieffer–Heeger chain. The proposed design is realized in an electrically injected Fabry–Perot (FP) laser chain. The lasing in topologically induced edge states is experimentally observed and a selective enhancement is realized by introducing a topological defect in the center. This work presents a versatile platform to investigate novel concepts such as the topological mode for mainstream photonic applications.
Parity-time (PT) symmetry breaking in counterintuitive gain/loss coupled waveguide designs is numerically and theoretically investigated. The PT symmetry mode selection conditions are determined theoretically. Single-transverse-mode broadband InAs quantum dot (QD) superluminescent light emitting diodes (SLEDs) are fabricated and characterized; the PT symmetric broad-area SLEDs contain laterally coupled gain and loss PT- symmetric waveguides. Single-transverse-mode operation is achieved by parity-time symmetry breaking. The broadband SLEDs exhibit a uniform Gaussian-like emission spectrum with the 3-dB bandwidth of 110 nm. Far-field characteristics of the coupled waveguide SLEDs exhibit a single-lobe far-field pattern when the gain and loss waveguides are biased at the injection current of 600 mA and 60 mA, respectively.