Wireless power transmission (WPT) is a critical technology that provides an alternative for wireless power and communication with implantable medical devices (IMDs). This article provides a study concentrating on popular WPT techniques for IMDs including inductive coupling, microwave, ultrasound, and hybrid wireless power transmission (HWPT) systems. Moreover, an overview of the major works is analyzed with a comparison of the symmetric and asymmetric design elements, operating frequency, distance, efficiency, and harvested power. In general, with respect to the operating frequency, it is concluded that the ultrasound-based and inductive-based WPTs have a low operating frequency of less than 50 MHz, whereas the microwave-based WPT works at a higher frequency. Moreover, it can be seen that most of the implanted receiver’s dimension is less than 30 mm for all the WPT-based methods. Furthermore, the HWPT system has a larger receiver size compared to the other methods used. In terms of efficiency, the maximum power transfer efficiency is conducted via inductive-based WPT at 95%, compared to the achievable frequencies of 78%, 50%, and 17% for microwave-based, ultrasound-based, and hybrid WPT, respectively. In general, the inductive coupling tactic is mostly employed for transmission of energy to neuro-stimulators, and the ultrasonic method is used for deep-seated implants.
24 August 2022 in IEEE Antennas and Wireless Propagation Letters
In this paper, a low-profile flexible dual-band quasi-isotropic antenna based on half-wavelength crossed dipoles is developed for unmanned aerial vehicle (UAV) applications. Specifically, to decrease the antenna profile, a coaxial structure is used to feed the antenna and no external balun is applied. Theoretical and numerical analyses of the designed antenna were conducted. To validate the design concept, an antenna prototype was fabricated and characterized. Good agreements have been observed between simulations and measurements. The measured radiation patterns show that the gain deviations across the whole spherical radiation surface are less than 7.5 dBi at 2.4 GHz and less than 8.7 dBi at 4.6 GHz. For the purpose of system demonstration, a 2 × 2 MIMO system employing the proposed antenna was assembled. The resulting dual-band MIMO system was deployed on a UAV for ground test, validating its potential for performance improvement of UAV communications.
In this work, a dual-band printed planar antenna, operating at two ultra-high frequency bands (2.5 GHz/4.5 GHz), is proposed for wireless power transfer for wearable applications. The receiving antenna is printed on a Kapton polyimide-based flexible substrate, and the transmitting antenna is on FR-4 substrate. The receiver antenna occupies 2.1 area. Antennas were simulated using ANSYS HFSS software and the simulation results are compared with the measurement results.
Tunable metasurfaces are of great potential for the next-generation electromagnetic systems (e.g. beamforming systems due to the capabilities for ultra-fast reconfiguration speed and agile beam programming on the go). The fundamental aspects of tunable metasurfaces laid on their freedom in manipulating the phase and amplitude of the outgoing wavefront. However, the current research heavily focused on the phase manipulation while left the amplitude manipulation capabilities of the metasurfaces barely explored. To unlock the full potential of tunable metasurfaces, in this article, a novel tunable metasurface design with the capability to control both amplitude and phase of transmitted wavefront has been designed, simulated, and characterized experimentally. By incorporating individual phase and amplitude control modules under the guidance of equivalent circuit models, the proposed metasurface achieved the arbitrary phase and amplitude tuning while maintaining reasonably low physical profile. The measurement results of fabricated samples validated the design procedure and fulfilled the flexibility in terms of phase and amplitude tuning, also paved the way towards achieving more powerful dynamic metasurfaces.
22 July 2022 in IEEE Transactions on Microwave Theory and Techniques
This article presents a novel method for the forward modeling and inverse design of a class of Schiffman phase shifters using deep neural networks (DNNs). Since DNNs are capable of mapping the highly nonlinear correlations between inputs and outputs, we constructed a fully connected DNN to predict the electromagnetic (EM) responses of Schiffman phase shifters given their physical dimensions. Based on this fast and accurate modeling tool, a cascaded inverse design DNN was then built and trained to achieve instant on-demand phase shifter designs. This approach is versatile and can be easily modified to accomplish different design goals. To demonstrate its efficacy, we trained two DNNs to realize Schiffman phase shifter designs with different bandwidths (40% and 60%) and arbitrary phase shift targets (0 $^{\circ}$ –180 $^{\circ})$ . Simulation results and experimental verifications substantiate that their performances are comparable with the state-of-the-art designs. Moreover, we discussed the proposed methods’ potential in dealing with design tasks that are nonintuitive and beyond the scope of the existing approaches. We envision that this DNN approach can be extended to the design of various EM components including but not limited to antennas, filters, power dividers, and frequency selective surfaces (FSS).
1 January 2018 in Progress in Electromagnetics Research C