Sensing the acceleration with high dynamic range follows space and size limitations and many errors and inconveniences caused by using multiple accelerometers on a single structure. A novel MEMS capacitive accelerometer with a dual-spring system has been proposed to address this issue. Such a design is a single device with two sensitivities in different sensing ranges. It increases the dynamic range of the sensing by incorporating the supporting springs at high accelerations. Therefore, the sensor can sense a more comprehensive dynamic range while maintaining the required resolution in different ranges. The design parameters of the sensor, such as the thickness of the structural layer, the size of the sensor, and the width of the spring beams, have been investigated. The mechanical sensitivity in the first range is 0.082 μm g−1. For the second range, it is 0.0015 to 0.0091 μm g−1 depending on the supportive springs’ width. Moreover, the natural frequency of the device is 1740 Hz. The capacitance change of the proposed sensor is 7 fF g−1 on average for the first range and 0.08 to 0. 48 fF g−1 for different configurations in the second range. Utilizing such sensors with changeable stiffness in different ranges can reduce the sensor footprint and fabrication cost and increase reliability.
The metallic layers are an essential part of MEMS (micro electromechanical system) devices, and their deposition process must be accurately controlled; this may lead to difficulties as there are many input parameters for such a process. This research focuses on the input parameters’ effects on the Ni pulse-reverse electroplating. A neural network was constructed to characterize the pulse-reverse nickel electroforming process parameters. The sample training has accurately established the mapping relationship between input and output parameters. The nickel layer thickness and surface roughness prediction in the pulse-reverse electroplating process was realized and verified by experimental tests with a test error of 3.3%. Then, the effect of direct and reverse current density, deposition time, structure width, and stirring speed as input parameters on the thickness and surface roughness are investigated. Finally, a novel 4D diagram has been developed to derive the optimal values of direct and reverse current density relative to thickness, surface roughness, and deposition time. This diagram can help researchers and industries find suitable parameters to achieve the desired deposited Ni layer’s properties.
SUMMARY: Nature has always inspired engineers. This research tries to understand the contribution of snake anatomy in its locomotion from engineering point of view to be adopted in the design of snake robots. Rib design and muscular structure of snake robots will have a great impact on snake robot flexibility, weight, and actuators' torque. It will help to eliminate wheels in snake robots during serpentine locomotion. The result of this research shows that snakes can establish the required peg points on smooth surfaces by deflecting the body and ribs. The results are verified by both field observations and simulation.
This paper presents the design, sim-ulation, and fabrication of a novel dual-range MEMS capacitive accelerometer that utilizes a dual-flexural suspension system for enhanced dynamic perfor-mance. The device inte-grates two sensing modes—low-g and high-g—within a unified archi-tecture to achieve both high sensitivity and wide dynamic range. Through systematic design optimization using COMSOL Multiphysics, the proposed accelerometer exhibits a high degree of linearity and stability across both operational ranges. Based on UV-Liga technology, the fabrication process is detailed alongside the results of the fabricated sensor's structure. Experimental results demon-strate successful mode switching with a sensitivity of 0.9 mV/g and 0.2 mV/g for low-g and high-g modes, respectively, validating the viability of the dual-mode concept for advanced inertial sensing applications such as navigation and structural monitoring.
The design of MEMS inertial switches is a challenging issue that is studied from different points of view, such as threshold acceleration, directional sensitivity, shock resistance, etc. For a reliable design, this paper presents a systematic approach for designing the switch derived from the outcomes of the theoretical modeling. First, the switch’s dynamic model based on a mass-spring system is created. Then, the spring stiffness coefficient equations in the x, y, and z directions are extracted. Next, the interrelation between design parameters and the impact of variable modifications on these parameters are examined. The study highlights the crucial role of the natural frequency in the design of the inertial switch structure. To achieve an optimal design, this parameter must be carefully selected in conjunction with considerations of pulse width, electrodes spacing, and response time. By formulating equations for the spring stiffness coefficients in the three orthogonal directions, it becomes possible to determine the geometric parameters of the spring that minimize off-axis sensitivity. The analysis and comparison of the variables’ influence in kx, ky and kz demonstrate that increasing the thickness of the structure is the most efficacious factor in facilitating the development of an optimal design.
This paper presents an innovative, history‐agnostic framework for lithium‐ion battery prognostics that addresses critical limitations of existing methods by removing the necessity for historical degradation data through the application of Bayesian neural networks (BNNs) and feature‐fusion techniques. A significant contribution is the introduction of four new health indicators (HIs) based on the voltage–time derivative (), which are fused with six other well‐established HIs derived from a single charge‐discharge cycle as inputs to the BNN. This comprehensive feature set facilitates two distinct BNNs to perform direct, non‐iterative predictions of the state of health (SoH) and remaining useful life (RUL), complete with principled uncertainty quantification. The effectiveness of the framework is validated through experiments conducted on the Oxford battery degradation dataset, employing a leave‐one‐out cross‐validation strategy. The results indicate exceptional performance, with the SoH model achieving values exceeding 0.998 and MAE below 0.002 across all test cells. The direct RUL prediction model also demonstrates high accuracy, with values consistently above 0.97 and a MAPE as low as 8.5%. By offering robust, uncertainty‐aware predictions without reliance on historical data, this approach presents a practical and scalable solution for real‐world battery management systems, particularly in applications involving second‐life batteries.