Epoxy resin-impregnated insulation paper (RIP) composites are used as the inner insulation of dry condenser bushing in the ultra-high voltage direct current (UHVDC) power transmission system. To improve the dielectric properties and heat conductivity of RIP, hexagonal boron nitride (h-BN) nano-flakes are added to the insulation paper at concentrations of 0–50 wt % before impregnation with pure epoxy resin. X-ray diffraction (XRD), scanning electron microscopy (SEM) observations, thermal conductivity as well as the typical dielectric properties of direct current (DC) volume conductivity. DC breakdown strength and space charge characteristics were obtained. The maximum of nano-h-BN modified heat conductivity reach 0.478 W/(m·K), increased by 139% compared with unmodified RIP. The DC breakdown electric field strength of the nano-h-BN modified RIP does not reduce much. The conductivity of nano-h-BN modified is less sensitive to temperature. As well, the space charge is suppressed when the content is 50 wt %. Therefore, the nano-h-BN modified RIP is potentially useful in practical dry DC bushing application.

Epoxy resin-impregnated insulation paper (RIP) composites are used as the inner insulation of dry condenser bushing in the ultra-high voltage direct current (UHVDC) power transmission system. To improve the dielectric properties of RIP, nano-SiO₂ is added to the insulation paper at concentrations of 0–4wt % before impregnation with pure epoxy resin. X-ray diffraction (XRD), scanning electron microscopy observations as well as the typical dielectric properties of relative permittivity, DC volume conductivity, DC breakdown strength, and thermally stimulated depolarization current (TSDC), were obtained. The effects of trap parameters on the breakdown field strength and volume conductivity were investigated. The DC breakdown electric field strength of the sample increased as the trap level increased. The maximum DC breakdown strength of nano-SiO₂-modified RIP was increased by 10.6% the nano-SiO₂ content of 2 wt %. The relative permittivity and DC volume conductivity were first decreased and then increased with increasing nano-SiO₂ content. These changes occurred near the interfaces between nano-SiO₂ and RIP. The increased DC breakdown strength was mainly attributed to the increased trap level.

In order to study the influence of trap parameters on dielectric characteristics of nano-modified pressboards, pressboards were made using the nano doping method with different nanoparticle components. The dielectric characteristics of the modified pressboards were measured, and the trap parameters were investigated using the thermally stimulated current (TSC) method. The test results indicated that the conductivity initially declined and then rose with the increase of nano-Al₂O₃ content, whereas it solely rose with the increase of nano-SiC content. Moreover, the conductivity exhibited nonlinear characteristics with the enhancement of electric field stress at high nanoparticle content. The relative permittivity of modified pressboard declines initially and then rises with the increase of nanoparticle content. In addition, the breakdown strength of modified pressboards exhibited a pattern of incline followed by decline with the increase of nano-Al₂O₃ content, while it always declined with the increase of nano-SiC content. The analysis based on the energy band theory on trap parameters of the constructed multi-core model concludes that the nanoparticle components added in pressboard altered both the depth and density of traps. It is therefore concluded that trap parameters have significant influence on the dielectric characteristics of nano-modified insulation pressboard.

In the industrial field, a cross-bonding (CB) connection is adopted in long-distance multiphase transmission cables to reduce the induced voltage of metal sheath. Due to the mutual coupling of signals in the three-phase cable sheath, it is difficult to diagnose and locate the defects of CB cables. Therefore, this article proposes a location method for CB cable defects based on multiphase high-frequency high-voltage collaborative excitation. A novel high-frequency high-voltage cascade topology circuit is proposed, which breaks the gain–bandwidth product limit of traditional amplifiers and solves the severe attenuation problem that the signal amplitude is too low for long-distance CB cables. A multiphase differential frequency collaborative excitation testing system was constructed based on this topology, achieving synchronous triggering and injection of three-phase isolated differential frequency sinusoidal excitations into the initial terminals of the CB cables. The three-phase impedance spectrum under different defect location is synchronously obtained based on the proposed CB cables transmission line decoupling model and impedance spectrum difference-frequency decoupling algorithm. The experiment shows that the location error rate is no higher than 0.127% through the synchronous transformation location algorithm, which demonstrates the extremely high location accuracy and testing efficiency.

Polypropylene undergoes permanent alterations during the processing and manufacture of cables due to shear effects, which in turn affect all of its qualities. There are currently few research papers on the modulation of material structure and many performance parameters by the shear stress field. In this study, we examined the impact of various shear levels on the structural, mechanical, and electrical properties of polypropylene, as well as their relationships. The results indicated that shear strength decreased the material’s viscosity and oxidation resistance. As shear duration increased, crystallinity began to diminish. In the meantime, the crystallinity improved as the shear temperature rose. The thermal elongations of the sheared samples were all about 5%. Short-term shearing boosted the material’s toughness, but as the degree of shear continued to increase, the material’s toughness and rigidity steadily decreased. The storage modulus of the material decreased with increasing shear, the loss peak initially increased and subsequently decreased, the peak position shifted from low to high temperature, and the loss factor was relatively small. In samples sheared for brief periods, an accumulation of space charge and an increase in its nonlinear threshold field strength were observed. With increasing shear time, the material’s space charge accumulation was repressed, the current density initially grew and then reduced, and the nonlinear threshold field strength initially fell and then increased. Under shearing, the electrical strength of the material increased by approximately 2%. In addition, the presence of an antioxidant improved all of the aforementioned features.