The past decade has witnessed the rapid development of the SRTM (Shuttle Radar Topography Mission) DEM (digital elevation model) in engineering applications and scientific research. The near-global SRTM DEM was generated based on radar interference theory. The latest version of the SRTM DEM with a resolution of 1 arc-second has been widely used in various applications. However, many studies have shown the poor elevation accuracy of the SRTM DEM in forested areas. Recent developments in the field of spaceborne lidar have provided an additional chance to correct the elevation error of the SRTM DEM in forested areas. We developed an easy-to-use method to correct the elevation error of the SRTM DEM based on the spatial interpolation method using the recent Ice, Cloud and land Elevation Satellite-2 data. First, an ICESat-2 terrain control point selection criterion was proposed to reject some erroneous ICESat-2 terrains caused by many factors. Second, we derived the elevation correction surface based on the interpolation method using the refined ICESat-2 terrain. Finally, a corrected SRTM DEM of forested areas was generated through the obtained elevation correction surface. The proposed method was tested in the typical forested area located in Massachusetts, USA. The results show that the RMSE of the selected terrain control points in vegetation areas and non-vegetation areas are 1.03 and 0.68 m, respectively. The corrected SRTM DEM have an RMSE of 4.2 m which is significantly less than that of the original SRTM DEM with an RMSE of 9.8 m, which demonstrates the proposed method is feasible to correct the elevation error in forested areas. It can be concluded that the proposed method obviously decreases the elevation error of the original SRTM DEM.

The Ice, Cloud, and land Elevation Satellite-2 (ICESat-2), launched in May 2019, increased the availability of different types of spaceborne laser altimetry data. But the obtained photon point cloud, especially those for the forest area with steep terrains, contains a lot of background noise that may greatly decrease the accuracy of the extracted digital elevation model (DEM) and forest height. Therefore, removing the background noise photons mixed up with the signal photons is necessary. We proposed a method for photon point cloud filtering using the backward elliptical distance (BED). First, we used the BED to express the spatial distance of the photon point cloud. On this basis, the backward local density was derived to identify signal photons and noise photons. Then we divided the data into several segments and set a local threshold for each segment to identify signal photons and noise photons. We validated the proposed method in the forested area with steep terrains in Washington State and Spain, and compared the results with that of other filtering methods. The comparison shows that the proposed method separates signal photons and noise photons better than other methods. The comprehensive evaluation indexes $F$ in Spain and that of the left, center, and right channels in Washington reach 0.9892, 0.9899, 0.9905, and 0.9915, respectively. In addition, compared with the global threshold selection, the local threshold selection is more stable.

Various error factors influence the inversion of forest canopy height using GEDI full-waveform LiDAR data, and the interaction of these factors impacts the accuracy of forest canopy height estimation. From an error perspective, there is still a lack of methods to fully correct the impact of various error factors on the retrieval of forest canopy height from GEDI. From the modeling perspective, establishing clear coupling models between various environments, collection parameters, and GEDI forest canopy height errors is challenging. Understanding the comprehensive impact of various environments and collection parameters on the accuracy of GEDI data is crucial for extracting high-quality and precise forest canopy heights. First, we quantitatively assessed the accuracy of GEDI L2A data in forest canopy height inversion and conducted an error analysis. A GEDI forest canopy height error correction model has been developed, taking into account both forest density and terrain effects. This study elucidated the influence of forest density and terrain on the error in forest canopy height estimation, ultimately leading to an improvement in the accuracy of forest canopy height inversion. In light of the identified error patterns, quality control criteria for GEDI footprints are formulated, and a correction model for GEDI forest canopy height is established to achieve high-precision inversion. We selected 19 forest areas located in the United States with high-accuracy Digital Terrain Models (DTMs) and Canopy Height Models (CHMs) to analyze the error factors of GEDI forest canopy heights and assess the proposed accuracy improvement for GEDI forest canopy heights. The findings reveal a decrease in the corrected RMSE value of forest canopy height from 5.60 m to 4.19 m, indicating a 25.18% improvement in accuracy.

The Sentinel-1 imaging radar mission provides a short revisit-time, continuous all-weather, and day-and-night imagery at the C-band, which brings opportunities for the dynamic extraction of lake water areas. For wetland-type lakes, it is difficult to distinguish between the water, submerged plants, and mudflats at the edge of a lake, which leads to difficulty in recognizing the water edge of a lake and affects the accuracy of lake water area extraction. In this paper, a water area extraction and water level prediction algorithm based on Sentinel-1 dual-polarization data decomposition is proposed to solve the problem. We can accurately extract lake water through generalized Stokes polarization decomposition. At the same time, we can verify the accuracy of water area extraction by establishing the water area and in situ water level elevation (A–E) relationship, and predicting the water level according to the calculated water area. In this study, dual-polarization Sentinel-1 time series SAR data covering the Dongting Lake wetland from 2018 to 2022 are used to verify the proposed water area extraction algorithm and establish the A–E relationship of the East Dongting Lake basin. The results show that the generalized Stokes decomposition parameters are very sensitive to the water boundary, and the R² of the water area and the water level can reach 0.98 by using the piecewise linear function. It confirms the accuracy of the water area inversion, which is of extremely important significance for the high-precision monitoring of the water area of Dongting Lake with long-term Sentinel-1 data. Meanwhile, the predicted lake water level acquired using the A–E relationship established in this paper is compared with the field water level, with an RMSE of 0.4857 m and R² of 0.9930. This means that the water level derived using the method in this study is quite compatible with the field observations, which provides a good idea for the water level monitoring of lakes lacking hydrological monitoring stations.

Photon cloud data filtering is crucial when obtaining forest vertical structure parameters from photon-counting LiDAR data. The proposed method, for the first time, takes into account the influence of the density difference between canopy photons and ground photons. A moving overlapping window approach is introduced to reduce the impact of an uneven background noise environment first. In each window, a modified elevation histogram statistics vector in the elevation direction is proposed to increase the density difference between signal and noise photons while also reducing the density difference between canopy and ground photons. The filtering results show that the average overall accuracy (OA) and standard deviation of the proposed method reach almost 0.99 and 0.01, respectively, which are much better results than those of the other existing filtering methods. Specifically, with the increase in the ratio of canopy photons to ground photons, the F-measure value of the proposed method reaches almost 0.99, and is also stable, which demonstrates that the proposed approach can almost completely eliminate the influence of the density difference between canopy photons and ground photons on the filtering results. In addition, the forest canopy heights obtained based on the proposed filtering method achieve the lowest root-mean-square error (RMSE) value of 3.18 m, compared to the other filtering methods. In summary, the proposed photon cloud data filtering method can retrieve reliable forest canopy height information from photon cloud data, and outperforms the other compared filtering methods in the given test site.