Shijuan Gao

Ms. Shijuan Gao

School of Geoscience and Info-physics, Central South University

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 July 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
YLYi Li
Yi Li
Haiqiang FuHaiqiang Fu
Haiqiang Fu
JZJianjun Zhu
Jianjun Zhu
KWKeFu Wu
KeFu Wu
PYPanfeng Yang
Panfeng Yang
SGShijuan Gao
Shijuan Gao
The past decade has witnessed the rapid development of the SRTM (Shuttle Radar Topography Mission) DEM (digital elevation model) in engineering applications and scientific research. The near-global SRTM DEM was generated based on radar interference theory. The latest version of the SRTM DEM with a resolution of 1 arc-second has been widely used in various applications. However, many studies have shown the poor elevation accuracy of the SRTM DEM in forested areas. Recent developments in the field of spaceborne lidar have provided an additional chance to correct the elevation error of the SRTM DEM in forested areas. We developed an easy-to-use method to correct the elevation error of the SRTM DEM based on the spatial interpolation method using the recent Ice, Cloud and land Elevation Satellite-2 data. First, an ICESat-2 terrain control point selection criterion was proposed to reject some erroneous ICESat-2 terrains caused by many factors. Second, we derived the elevation correction surface based on the interpolation method using the refined ICESat-2 terrain. Finally, a corrected SRTM DEM of forested areas was generated through the obtained elevation correction surface. The proposed method was tested in the typical forested area located in Massachusetts, USA. The results show that the RMSE of the selected terrain control points in vegetation areas and non-vegetation areas are 1.03 and 0.68 m, respectively. The corrected SRTM DEM have an RMSE of 4.2 m which is significantly less than that of the original SRTM DEM with an RMSE of 9.8 m, which demonstrates the proposed method is feasible to correct the elevation error in forested areas. It can be concluded that the proposed method obviously decreases the elevation error of the original SRTM DEM.

31 August 2024 in Forests
Verified
Journal Article
Open access
PDF file
YLYi Li
Yi Li
SGShijuan Gao
Shijuan Gao
Haiqiang FuHaiqiang Fu
Haiqiang Fu
JZJianjun Zhu
Jianjun Zhu
QHQing Hu
Qing Hu
YWYonghui Wei
Yonghui Wei
Various error factors influence the inversion of forest canopy height using GEDI full-waveform LiDAR data, and the interaction of these factors impacts the accuracy of forest canopy height estimation. From an error perspective, there is still a lack of methods to fully correct the impact of various error factors on the retrieval of forest canopy height from GEDI. From the modeling perspective, establishing clear coupling models between various environments, collection parameters, and GEDI forest canopy height errors is challenging. Understanding the comprehensive impact of various environments and collection parameters on the accuracy of GEDI data is crucial for extracting high-quality and precise forest canopy heights. First, we quantitatively assessed the accuracy of GEDI L2A data in forest canopy height inversion and conducted an error analysis. A GEDI forest canopy height error correction model has been developed, taking into account both forest density and terrain effects. This study elucidated the influence of forest density and terrain on the error in forest canopy height estimation, ultimately leading to an improvement in the accuracy of forest canopy height inversion. In light of the identified error patterns, quality control criteria for GEDI footprints are formulated, and a correction model for GEDI forest canopy height is established to achieve high-precision inversion. We selected 19 forest areas located in the United States with high-accuracy Digital Terrain Models (DTMs) and Canopy Height Models (CHMs) to analyze the error factors of GEDI forest canopy heights and assess the proposed accuracy improvement for GEDI forest canopy heights. The findings reveal a decrease in the corrected RMSE value of forest canopy height from 5.60 m to 4.19 m, indicating a 25.18% improvement in accuracy.

25 April 2022 in Forests
Verified
Journal Article
Open access
PDF file
YLYi Li
Yi Li
JZJun Zhu
Jun Zhu
Haiqiang FuHaiqiang Fu
Haiqiang Fu
SGShijuan Gao
Shijuan Gao
CWChangcheng Wang
Changcheng Wang
The Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) was successfully launched. Due to its small spot size, multibeam configuration, high sampling rate, and strong immunity to terrain slopes, it has been regarded as a powerful tool for forest resources surveying and managing. However, the ICESat-2 photon cloud data contain considerable background photons, which discretely distribute in the background space of signal photons. Therefore, it is necessary to filter these noise photons. In this study, photons are divided into three categories: signal photons, noise photons far away from signal photons, and noise photons adjacent to signal photons. Based on the existing research, forward and backward elliptical distances were used to express the spatial relationship between two photons, and backward local density (BLD) was used to describe the density distribution of the photons. However, the single statistical parameter cannot clearly distinguish three types of photon cloud. Therefore, forward local density (FLD) and neighboring forward local density difference (NFLDD) also were defined to describe the density distribution of the photons. Finally, by combining the support vector machine (SVM), the above three density parameters were used to classify the photons by signal and noise photons. The proposed method was validated with photon cloud data acquired by the Simulated Advanced Terrain Laser Altimeter System (MATLAS), the Multiple Altimeter Beam Experimental Lidar (MABEL), and the ICESat-2 systems over different forested areas. The results demonstrated that the proposed method can well remove the noise photons and retain the signal photons without depending on any statistical assumptions or thresholds. The comprehensive accuracy of the three test sites was 0.99, 0.98, and 0.99, respectively, which was higher than those of the existing method. In addition, the total errors corresponding to the three test sites were about 0.4%, 0.5%, and 1.0% respectively, which were lower than those of the existing method.

16 June 2022 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
SGShijuan Gao
Shijuan Gao
YLYi Li
Yi Li
JZJianjun Zhu
Jianjun Zhu
Haiqiang FuHaiqiang Fu
Haiqiang Fu
CZCui Zhou
Cui Zhou
Lots of noise photons limit the application of Ice, Cloud and land Elevation Satellite-2 (ICESat-2) in forest canopy height retrieval. Abundant noise photons lead to unstable filtering results, thus affecting the canopy top photons classification. Therefore, this study proposes a method that takes account of the background noise level in the photon cloud. First, we propose an improved Differential, Regressive, and Gaussian Adaptive Nearest Neighbor (DRAGANN) filtering approach based on the DRAGANN filtering method. To obtain a more stable filtering result, large-scale and small-scale search radiuses are combined to improve the DRAGANN filtering performance. Second, we retrieve sub-canopy terrain topography by the multi-scale window detection method from the filtered photon cloud. Finally, a robust photon acquisition criterion based on the elevation difference of the filtered photons and the uneven density of signal photons is proposed to extract the canopy-top surface, which aims to mitigate the influence of inconsistencies of residual noise photons along the track. In addition, considering the fluctuation of the canopy surface, we use a non-spline interpolation method to obtain a continuous canopy surface, which avoids the Runge phenomenon caused by the spline interpolation method. The ICESat-2 data acquired in the Harvard Forest Region (HARV) is selected to assess the proposed method. The filtering performance of the improved DRAGANN approach shows stable than that of the DRAGANN approach. The proposed method’s root means square error (RMSE) and coefficient of determination (R2) reach 3.85 m and 0.55, respectively. The results indicate that the proposed method can retrieve reliable forest canopy height from the ICESat-2 data and performs significantly better than the ATL08 canopy height product in the test site.

29 July 2022 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
YLYi Li
Yi Li
Haiqiang FuHaiqiang Fu
Haiqiang Fu
SGShijuan Gao
Shijuan Gao
JZJianjun Zhu
Jianjun Zhu
LWLi Wang
Li Wang
CWChangcheng Wang
Changcheng Wang
Vegetation height estimation of desert ecosystems is important for understanding the groundwater cycle. Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) provides an opportunity to measure vegetation heights on a global scale. This letter proposed a method for retrieving low and sparse vegetation heights in desert ecosystems. Considering the significant difference in density between the vegetation and ground photons, the ground photons were removed based on the terrain-adaptive method first. The localized density parameter was then introduced to distinguish the vegetation and noise photons. Finally, the vegetation heights were obtained by the elevation percentile approach. The proposed method was tested using the ICESat-2 data acquired over a desert located in Arizona. The vegetation height results derived by the proposed method have an RMSE of 0.78 m that is significantly less than that of ATL08 with an RMSE of 4.26 m, which demonstrates that it is feasible to extract low and sparse vegetation height in desert areas. The results showed that ICESat-2 photon cloud LiDAR data are suitable for low and sparse vegetation height investigations in desert ecosystems.

20 June 2023 in Forests
Verified
Journal Article
Open access
PDF file
SGShijuan Gao
Shijuan Gao
JZJianjun Zhu
Jianjun Zhu
Haiqiang FuHaiqiang Fu
Haiqiang Fu
Continuous and extensive monitoring of forest height is essential for estimating forest above-ground biomass and predicting the ability of forests to absorb CO2. In particular, forest height at the national scale is an important indicator reflecting the national forestry economic construction, environmental governance, and ecological balance. However, the lack of inventory data restricts large-scale monitoring of forest height to some extent. Conducting manual surveys of forest height for large-scale areas would be labor-intensive and time-consuming. The successful launch of the new generation of spaceborne light detection and ranging (LiDAR) (The Ice, Cloud, and Land Elevation Satellite-2/the Advanced Topographic Laser Altimeter System, ICESat-2/ATLAS) has brought new opportunities for national-scale forestry resource surveys. This paper explores a method to survey national forest canopy height from the new generation of ICESat-2/ATLAS data. In view of the sparse sampling and little overlap between repeated spaceborne LiDAR data, a strategy for assessing the overall change of canopy height for large scales is provided. Some spatially continuous ancillary data were used to assist ICESat-2/ATLAS data to generate a wall-to-wall (spatially continuous) forest canopy height map in China by using the machine learning approach and then quantifying the analysis of forest canopy height in various provinces. The results show that there is a good correlation between the model forest height and the verification data, with a root mean squared error (RMSE) of 3.30 m and a coefficient of determination (R2) of 0.87. This indicates that the method for retrieving national forest canopy height is reliable. There are some limitations in areas with lower vegetation coverage or complex topography which need additional filtering or terrain correction to achieve higher accuracy in measuring forest canopy height. Our analysis suggests that ICESat-2/ATLAS data can achieve the retrieval of national forest height at an overall level, and it would be feasible to use ICESAT-2/ATLAS products to estimate forest canopy height change for large-scale areas.