Capturing particulate matter (PM) is an important issue due to the protection of human health and the quality of their life. This paper describes the innovation of an affordable particulate matter capture device for small heat sources to reduce particulate matter emissions. The design of two investigated variants of the device is based on the principle of a tubular electrostatic precipitator with one charging electrode placed in the chimney. The design of the precipitators is aimed at increasing the area of the collecting electrodes by elements dividing precipitation space, with a simultaneously increased number of charging electrodes. The influence of the elements’ application on the pressure drop and the gas flow velocity through the devices is analyzed by computational fluid dynamics (CFD). The work is further focused on the economic evaluation of precipitators and design adjustments for lower energy consumption. The achieved results show the right direction of efforts to improve the equipment designed to capture PM emissions.

On the way to reducing emissions released into the atmosphere, there is an obstacle in the form of the emissions of solid pollutants produced by households, namely the burning of solid fuels in small heat sources. In this article, the authors deal with the development of a low-cost electrostatic precipitator, which would be able to significantly reduce the production of particulate matter. This is a tubular precipitator concept, which is enhanced by dividing the precipitation space into four chambers, each of which has an ionization electrode. With the investigated structural arrangement, it is possible to increase the size of the collection area without affecting the external dimensions of the separator. The essence of this article was to focus on the design of an ionization electrode, which, in addition to the function of a negative electrode, would also fulfill the function of a structural element of the proposed geometry. The work contains a technical design for the shape of the ionization electrode, which was subsequently examined using ANSYS Fluent software. The conditions under which a corona discharge will occur on the electrodes and how particulate matter is captured in the separation device were investigated with the help of simulations of the electric field intensity. According to the achieved simulation results, calculations were made for the theoretical efficiency of particle collection, which reached a value of approximately 78%.

Spiral plate heat exchangers (SPHEs) are used in industrial applications due to their enhanced thermal performance and tolerance to a soiled stream. The coupling of several SPHEs in series might further improve performance in terms of the effectiveness parameter. In the present study, a compact connection of several SPHE modules is proposed and investigated. For this purpose, a numerical model for the prediction of the effectiveness parameter of a modular SPHE was developed. The model predicted a 2.9% increase in the maximal effectiveness for a two-module SPHE in comparison to a conventional single module SPHE. The temperature profiles of particular streams within the two-module SPHE were predicted. The improved thermal performance and compactness of the modular SPHE configuration observed is advantageous for space-constrained applications.

The article deals with the design of the diameter and the simulation of the distribution of the intensity of the electric field of the charging electrode of the electrostatic precipitator, given the supplied DC voltage. The purpose was to calculate the value of the critical intensity of the electric field, which must be exceeded when trying to achieve the state of corona discharge on the electrode, which is a condition for electrostatic separation. Subsequently, CFD simulations of two 3D models with electrode diameters of 1 and 4 mm were created, on which the distributions of the electric field intensity were observed at a DC voltage of 20 kV. The simulations confirmed the results of the calculations that the corona discharge at a voltage of 20 kV will occur only on an electrode with a diameter of 1 mm.

This article describes the design of an experimental device for simulating pipe expansion. The device consisted of various variants of compensating elements and types of piping materials. Based on this, a 3D model was developed, together with numerical design calculations of compensators. Subsequently, a more complex analysis was performed by using the CAE Pipe calculation program, which performed calculations of dilatations, forces at fixed points and stresses in the pipeline.