A long period fiber grating (LPFG) was inscribed in a tapered two-mode fiber (TMF) by using CO2 laser pulse point to point direct writing technique. TMF is spliced between two segments of single mode fiber, then TMF is tapered to a waist diameter of 55 μm, and this structure cannot form a fiber optic interferometer. After writing a LPFG on a tapered TMF, many resonance dips appeared. These resonance dips are formed by the coupling between different core modes and cladding modes, therefore they have different sensitivity responses to environmental parameters. In order to further improve the sensitivity of LPFG resonance dips and the mechanical strength of LPFG, the polydimethylsiloxane (PDMS) optical material is coated on the surface of LPFG. The experiment found that two resonance dips wavelength of λ 1 and λ 1 of LPFG are very sensitive to temperature and gas pressure, and the temperature and gas pressure sensitivities of λ 1 reach -0.412 nm/°C and -12.16 nm/MPa respectively, while the temperature and gas pressure sensitivities of λ 2 reach -0.484 nm/°C and -18.26 nm/MPa respectively. Due to its simple manufacturing, low cost, and robustness, this LPFG has enormous potential in highly sensitive temperature and gas pressure measurement applications.
Novel optical fiber temperature sensors, composing two cascaded Fabry-Perot interferometer (FPI) cavities have been proposed to realize ultrahigh temperature sensitivity based on the mechanism of harmonic Vernier effect (HVE). Three reference cavities, FPIr1, FPIr2, and FPIr3, were cascaded to the sensing cavity (FPIs) to fabricate sensor1, sensor2 and sensor3, respectively. Sensor1 is designed for traditional Vernier effect (TVE) based temperature experiments with almost the same detuning as sensor2 is; sensor2 and sensor3 are designed for HVE-based temperature experiments with the harmonic order i = 1 and three times the difference in detuning. The internal intersection points in the spectra of HVE-based sensors can provide accurate spectral position and shift. The single FPIs shows linear response to temperature with sensitivity of ~ 1.064 nm/°C; The TVE-based sensor1 shows temperature sensitivity of ~ -8.430 nm/°C, indicating a magnification factor of ~ -7.92; the HVE-based sensor2 shows temperature sensitivity of ~ 15.341 nm/°C, indicating a harmonic magnification factor of ~ 14.42, which is similar to (1+1) times 7.92; the sensor3, based on HVE i = 1 too, shows temperature sensitivity of ~ 50.351 nm/°C, which is 3 times larger than that of sensor2 for the three times smaller detuning. These results indicate HVE-based sensors can achieve a high sensitivity with a large detuning which means easier fabrication, and can get ultrahigh sensitivity with a small detuning. These PDMS-based temperature sensors, due to their small size and resistance to electromagnetic interference and excellent performance of PDMS, can meet different requirements for temperature.
In this study, we believe this is a novel and compact fiber optic sensor for measuring strain and vector magnetic fields that has been proposed and examined. The sensor is comprised of a sequence of two bubbles and a tapered fiber with a diameter of 31µm, offering a maximum strain sensitivity of -44.5 pm/µɛ. A susceptible magnetic field sensing structure can be achieved by simply bonding the strain device to a magnetostrictive material. Results demonstrate that the sensor exhibits a magnetic field sensitivity of -0.7838 nm/mT, with a linear fit of 0.9931 within the 8 to 28 mT. The direction sensitivity is calculated to be 230.85 pm/° for a magnetic field of 24 mT. This work demonstrates the device's great mechanical strength, low cross-sensitivity to temperature, ease of manufacture, and versatility in measuring strain and vector magnetic fields, making it suitable for use in civil engineering, aerospace, and other industrial fields.