A new type of hydroxyalkyl starch, γ-hydroxypropyl starch (γ-HPS), was prepared by etherification of alkali-activated starch with 3-chloropropanol. The reaction efficiency, morphological change, thermodynamic and apparent viscosity properties, and other physicochemical characteristics were described. The molar substitution (MS) of modified whole starch was determined to be 0.008, 0.017, 0.053, 0.106, and 0.178, with a ratio of 5%, 15%, 25%, 35%, and 45% 3-chloropropanol to starch (v/w), respectively. Compared to native starch, the granular size and shape and the X-ray diffraction pattern of γ-HPS are not very different. For low-substituted γ-HPS, the implications may be less evident. Thermal stability measurements by means of thermogravimetric analyses and differential scanning calorimetry (TGA-DSC) proved that thermal stability was reduced and water retaining capacity was increased after hydroxypropylation. Furthermore, the findings also showed that the solubility, light transmittance, and retrogradation of γ-HPS pastes could be improved by etherification. The greater the MS of the γ-HPS, the more its freeze–thaw stability and acid resistivity increased. In this study, we provide relevant information for the application of γ-HPS in food and non-food industries.
8 December 2023 in Sustainable Chemistry and Pharmacy
The performance of zeolite membrane supports directly determines the synthesis performance and industrial application of zeolite membranes. In this study, a novel and high permeation SiC supports for NaA zeolite membrane were prepared by carrying out in situ reaction bonding at high temperature in the air atmosphere to coat the SiC particles with aluminum sol. The effects of process parameters on the formation of porous structure of SiC supports were systematically investigated, and the underlying mechanism was explored. During the sintering process, high-temperature Al2O3 from aluminum sol reacted with SiO2 generated by oxidation of the surface of SiC particles to form mullite, which exhibited excellent chemical stability and improved the mechanical properties and chemical stability of the supports. The porous SiC supports for zeolite membrane displayed obvious three-dimensional connected pore structure, with smooth inner surface of the pores and obvious connection neck between the particles. The porous SiC supports for zeolite membrane showed good in situ mullite bonding between the particles, and high permeability. It has a porosity of 36.3%, an average pore size of 1.42 µm and a bending strength of 32.4 MPa. All these figures indicate good comprehensive properties that are consistent with the rigorous requirements of zeolite membrane synthesis and industrial application.