The photocatalytic depolymerization of lignin is a sustainable strategy to produce high-value aromatic chemicals. The selective and efficient cleavage of β-O-4 bonds under mild conditions remains one of the challenges in lignin valorization. Herein, an efficient and mild strategy was employed for one-step photocatalytic depolymerization of lignin and β-O-4 model compounds over novel Z-scheme heterojunction g-C3N4/carbon quantum dot/CdZnS (CN/CQD/CZS) under simulated solar light. The total yield of vanillin and vanillic acid from lignin depolymerization was 36.3 mg g−1 lignin when the volume ratio of SDS-8 (sodium dodecyl sulfate solution with a mass fraction of 0.08%) to HCOOH was 4 : 1 within 2 h. The depolymerization mechanism of lignin was investigated using β-O-4 model compounds. The β-O-4 model compounds were converted into phenolic monomers over optimized CN/CQD/CZS, yielding 84% substrate conversion and ∼100% C–O bond cleavage selectivity. Three extractive natural lignin samples were applied to this system and successfully depolymerized. A combination of experimental results and theoretical calculations illustrated that CQDs played a crucial role in accelerating photogenerated electron transfer at the CN/CZS interface via the Z-scheme electron pathway, which effectively promoted the separation and transfer of photoexcited hole–electron pairs. Mechanistic studies demonstrated that the selective cleavage of the β-O-4 bond mainly involved a photogenerated electron–hole coupled redox mechanism. The construction of the Z-scheme CN/CQD/CZS heterojunction is essential to enhance the kinetics of electron transport and maintain strong redox ability. The approach in this work offers a useful guidance for the construction of Z-scheme heterojunction photocatalysts with a carbon-based electron mediator and the selective breakage of C–O bonds in lignin.
Fabricating highly efficient Pd-based nanocatalysts with a well-defined structure is desired for the commercialization of direct ethanol fuel cell (DEFC). Herein, a series of hierarchical three-dimensional N-doped hollow graphene spheres (NHGS) supported dendritic PdCu alloy catalysts Pd$_{x}$Cu$_{(d)}$-NHGS (x: Cu/Pd theoretical molar ratio of 4, 2, and 1) are assembled by one-pot ascorbic acid reduction-immobilization method. Aiming to maximize the Pd utilization and realize the efficient ethanol electrooxidation, this novel electrocatalyst offers potent activity sites and promotes electron and ion kinetics simultaneously. Characterization indicates that the as-obtained Pd$_{4}$Cu$_{(d)}$ alloy nanoparticles with average sizes of approximately 55 nm are evenly dispersed on the NHGS supporting materials obtained by using the SiO2 nanospheres template strategy. Three catalysts all exhibit enhanced electrocatalytic activity, of which the Pd$_{4}$Cu$_{(d)}$-NHGS shows the highest mass current activity (2683 mA mg$_{Pd}$$^{-1}$), which is 2.59 times of the commercial Pd/C toward ethanol electrooxidation in alkaline medium. Based on the results, we believed that the Pd$_{4}$Cu$_{(d)}$-NHGS could exhibit extensive application prospect in alkaline DEFC. Key words:
In order to find a better collector for the separation of carbon and kaolin from coal gangue flotation, and to explore the action mechanism of collectors, this paper selected 12 kinds of collectors for systematic comparison, including five non-polar organics with different carbon chain lengths, and polar organic matters with double bonds, triple bonds, benzene, as well as cycloalkyl, ester, carboxyl, and aldehyde groups. The flotation results show that the longer carbon chain (with a carbon atom number of 13~15), the better the flotation effect, the better the effect of the collector with the phenyl group (among the four hydrocarbon groups), and the better the effect of the collector with the ester group (among the three functional groups). In order to explore the flotation mechanism at the microscopic level, the molecular structure of carbon in coal gangue was detected using a solid nuclear magnetic test. Afterwards, the organic macromolecule model of carbon was simulated. Finally, the interaction energy values between carbon and collectors were calculated in accordance with the density functional theory, and the order of the acting force of collectors was obtained, which was consistent with that of the collectors in the macro experiment.
A mesoporous SnO–γ-Al2O3 nanocomposite was synthesized by a seeding-crystallization method and investigated in catalytic esterification of pentaerythritol and stearic acid to produce pentaerythrityl tetrastearate.
A series of Zr(SO4)2/SiO2 solid acid catalysts with different Zr(SO4)2 loadings were prepared by water-soluble-impregnation method at room temperature. Then, the prepared catalysts were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy and energy-dispersive X-ray spectrum, X-ray diffraction, adsorption/desorption of N2, and temperature-programmed desorption of NH3. The results showed that the active component Zr(SO4)2 was successfully adhered to the mesoporous SiO2, and the acid amount of Zr(SO4)2/SiO2 increased with the increasing of the Zr(SO4)2 loadings. Finally, the wheat stalk was used as raw material and depolymerized over Zr(SO4)2/SiO2 to produce ethyl levulinate (EL). The reaction mixture was separated and purified by filtration and vacuum distillation. The kinetic characteristics and the reaction pathway were also studied. A comparative study showed that 20 wt.% Zr(SO4)2/SiO2 exhibited higher catalytic activity. When reaction temperature, time, catalyst dosage and Zr(SO4)2 loadings were 190 °C, 50 min, 20 wt.% and 30 wt.%, the EL yield reached a maximum of 17.14%. The relative content of EL exceeded 90% after three steps of distillation.