Airborne array tomographic synthetic aperture radar (TomoSAR) can acquire three-dimensional (3D) information of the observed scene in a single pass. In the process of airborne array TomoSAR data imaging, due to the disturbance of factors such as inconsistent antenna patterns and baseline errors, there are spatially varying amplitude-phase inconsistency errors in the multi-channel Single-Look-Complex (SLC) images. The existence of the errors degrades the quality of the 3D imaging results, which suffer from positioning errors, stray points, and spurious targets. In this paper, a new calibration method based on multiple prominent points is proposed to calibrate the errors of amplitude-phase inconsistency. Firstly, the prominent points are selected from the multi-channel SLC data. Then, the subspace decomposition method and maximum interference spectrum method are used to extract the multi-channel amplitude-phase inconsistency information at each point. The last step is to fit the varying curve and to compensate for the errors. The performance of the method is verified using actual data. The experimental results show that compared with the traditional fixed amplitude-phase inconsistency calibration method, the proposed method can effectively calibrate spatially varying amplitude-phase inconsistency errors, thus improving on the accuracy of 3D reconstruction results for large-scale scenes.

Tomographic Synthetic Aperture Radar (TomoSAR) is a breakthrough of the traditional SAR, which has the three-dimentional (3D) observation ability of layover scenes such as buildings and high mountains. As an advanced system, the airborne array TomoSAR can effectively avoid temporal de-correlation caused by long revisit time, which has great application in high-precision mountain surveying and mapping. The 3D reconstruction using TomoSAR has mainly focused on low targets, while there are few literatures on 3D mountain reconstruction. Due to the layover phenomenon, surveying in high mountain areas remains a difficult task. Consequently, it is meaningful to carry out the research on 3D mountain reconstruction using the airborne array TomoSAR. However, the original TomoSAR mountain point cloud faces the problem of elevation ambiguity. Furthermore, for mountains with complex terrain, the points located in different elevation periods may intersect. This phenomenon increases the difficulty of solving the problem. In this paper, a novel elevation ambiguity resolution method is proposed. First, Density-Based Spatial Clustering of Applications with Noise (DBSCAN) and Gaussian Mixture Model (GMM) are combined for point cloud segmentation. The former ensures coarse segmentation based on density, and the latter allows fine segmentation of the abnormal categories caused by intersection. Subsequently, the segmentation results are reorganized in the elevation direction to reconstruct all possible point clouds. Finally, the real point cloud can be extracted automatically under the constraints of the boundary and elevation continuity. The performance of the proposed method is demonstrated by simulations and experiments. Based on the airborne array TomoSAR experiment in Leshan City, Sichuan Province, China in 2019, the 3D model of the surveyed mountain is presented. Moreover, three kinds of external data are applied to fully verify the validity of this method.

Tomographic synthetic aperture radar (TomoSAR) obtains elevation resolution by adding multiple baselines successively in the direction perpendicular to the line of sight, thereby realizing three-dimensional (3D) reconstruction of complex scenes and significantly promoting the development of the 3D application field. However, a large data redundancy and long mapping time in traditional 3D imaging lead to a large data transmission burden, low efficiency, and high costs. To solve the above problems, this paper proposes a distributed SAR high-resolution and wide-swath (HRWS) 3D imaging technology scheme. The proposed scheme overcomes the size limitation of traditional single-satellite antennas through the multi-channel arrangement of multiple satellites in the elevation direction to achieve HRWS imaging; meanwhile, the distributed SAR system is integrated with tomographic processing technology to realize 3D imaging of difficult areas by using the elevation directional resolution of TomoSAR systems. HRWS 3D SAR increases the baseline length and channel number by transmission in turn, which leads to excessive pulse repetition frequency and causes echoes of different pulse signals to overlap in the same receiving cycle, resulting in range ambiguity and thus seriously affecting the quality of the 3D reconstruction. To solve this problem, this paper proposes a range ambiguity resolution algorithm based on multi-beam forming and verifies it on the measured data from airborne array SAR. Compared with the traditional TomoSAR, the distributed HRWS 3D SAR scheme proposed in this paper can obtain a greater mapping bandwidth with the same resolution in a single flight, thereby enhancing the time correlation, reducing data redundancy, and greatly improving mapping efficiency.

Airborne array-interferometric synthetic aperture radar (array-InSAR), one of the implementation methods of tomographic SAR (TomoSAR), has the advantages of all-time, all-weather, high consistency, and exceptional timeliness. As urbanization continues to develop, the utilization of array-InSAR data for building detection holds significant application value. Existing methods, however, face challenges in terms of automation and detection accuracy, which can impact the subsequent accuracy and quality of building modeling. On the other hand, deep learning methods are still in their infancy in SAR point cloud processing. Existing deep learning methods do not adapt well to this problem. Therefore, we propose a Position-Feature Attention Network (PFA-Net), which seamlessly integrates positional encoding with point transformer for SAR point clouds building target segmentation tasks. Experimental results show that the proposed network is better suited to handle the inherent characteristics of SAR point clouds, including high noise levels and multiple scattering artifacts. And it achieves more accurate segmentation results while maintaining computational efficiency and avoiding errors associated with manual labeling. The experiments also investigate the role of multidimensional features in SAR point cloud data. This work also provides valuable insights and references for future research between SAR point clouds and deep learning.

Building reconstruction using high-resolution tomographic synthetic aperture radar (TomoSAR) point clouds has been very attractive in numerous applications, such as urban planning and dynamic city modeling. However, for side-looking TomoSAR, it is a challenge to reconstruct the obscured backs of buildings using traditional single-bounce scattering-based methods. It comes to our attention that the higher-order scattering points in airborne array TomoSAR point clouds may provide rich information on the backs of buildings. In this paper, the fourfold bounce (FB) scattering model of combined buildings in airborne array TomoSAR is derived, which not only explains the cause of FB scattering but also gives the distribution pattern of FB scattering points. Furthermore, a novel FB scattering-based method for the reconstruction of building backs is proposed. First, a two-step geometric constraint is used to detect the candidate FB scattering points. Subsequently, the FB scattering points are further detected by seed point selection and density estimation in the radar coordinate system. Finally, the backs of buildings can be reconstructed using the footprint inverted from the FB scattering points and the height information of the illuminated facades. To verify the FB scattering model and the effectiveness of the proposed method, the results from the simulated point clouds and the real airborne array TomoSAR point clouds are presented. Compared with the traditional roof point-based methods, the outstanding advantage of the proposed method is that it allows for the high-precision reconstruction of building backs, even in the case of poor roof points. Moreover, this paper may provide a novel perspective for the three-dimensional (3D) reconstruction of dense urban areas.

Circular synthetic aperture radar (CSAR) offers multi-angle scattering for strong directional targets, benefiting urban surveying. However, the CSAR three-dimensional (3D) imaging of buildings is difficult. The reference height mismatch problem during imaging can lead to a defocused target, and a significant layover phenomenon exists in urban environments. To solve these problems and realize the CSAR 3D imaging of buildings, this study adopts the airborne circular flight array synthetic aperture radar (CFASAR) system for data acquisition and proposes a 3D processing method for airborne CFASAR based on layered phase compensation in the wavenumber domain. CFASAR has advantages over single-baseline and multi-baseline CSAR, as 3D imaging is independent of target azimuth scattering consistency and reduces flight experiment complexity. 3D imaging of buildings consists of two key steps: layered focusing based on phase compensation in the wavenumber domain and super-resolution imaging, which solves the defocusing problem and contributes to high-dimensional resolution. Compared with the traditional layered back projection (BP) imaging, the layered focusing method based on phase compensation in the wavenumber domain has a lower computational complexity. Layered focusing combined with super-resolution processing effectively suppresses conical sidelobes, addresses layover issues, and establishes an accurate 3D scattering model. The proposed method was validated using X-band airborne CFASAR data obtained in Rizhao, Shandong Province, China, in 2021. The experimental results indicate that the proposed method has low time complexity, and it can effectively suppress the conical sidelobe of CSAR and realize high-quality 3D reconstruction of buildings.