Airborne array tomographic synthetic aperture radar (TomoSAR) can acquire three-dimensional (3D) information of the observed scene in a single pass. In the process of airborne array TomoSAR data imaging, due to the disturbance of factors such as inconsistent antenna patterns and baseline errors, there are spatially varying amplitude-phase inconsistency errors in the multi-channel Single-Look-Complex (SLC) images. The existence of the errors degrades the quality of the 3D imaging results, which suffer from positioning errors, stray points, and spurious targets. In this paper, a new calibration method based on multiple prominent points is proposed to calibrate the errors of amplitude-phase inconsistency. Firstly, the prominent points are selected from the multi-channel SLC data. Then, the subspace decomposition method and maximum interference spectrum method are used to extract the multi-channel amplitude-phase inconsistency information at each point. The last step is to fit the varying curve and to compensate for the errors. The performance of the method is verified using actual data. The experimental results show that compared with the traditional fixed amplitude-phase inconsistency calibration method, the proposed method can effectively calibrate spatially varying amplitude-phase inconsistency errors, thus improving on the accuracy of 3D reconstruction results for large-scale scenes.

Airborne array-interferometric synthetic aperture radar (array-InSAR), one of the implementation methods of tomographic SAR (TomoSAR), has the advantages of all-time, all-weather, high consistency, and exceptional timeliness. As urbanization continues to develop, the utilization of array-InSAR data for building detection holds significant application value. Existing methods, however, face challenges in terms of automation and detection accuracy, which can impact the subsequent accuracy and quality of building modeling. On the other hand, deep learning methods are still in their infancy in SAR point cloud processing. Existing deep learning methods do not adapt well to this problem. Therefore, we propose a Position-Feature Attention Network (PFA-Net), which seamlessly integrates positional encoding with point transformer for SAR point clouds building target segmentation tasks. Experimental results show that the proposed network is better suited to handle the inherent characteristics of SAR point clouds, including high noise levels and multiple scattering artifacts. And it achieves more accurate segmentation results while maintaining computational efficiency and avoiding errors associated with manual labeling. The experiments also investigate the role of multidimensional features in SAR point cloud data. This work also provides valuable insights and references for future research between SAR point clouds and deep learning.

Circular synthetic aperture radar (CSAR) offers multi-angle scattering for strong directional targets, benefiting urban surveying. However, the CSAR three-dimensional (3D) imaging of buildings is difficult. The reference height mismatch problem during imaging can lead to a defocused target, and a significant layover phenomenon exists in urban environments. To solve these problems and realize the CSAR 3D imaging of buildings, this study adopts the airborne circular flight array synthetic aperture radar (CFASAR) system for data acquisition and proposes a 3D processing method for airborne CFASAR based on layered phase compensation in the wavenumber domain. CFASAR has advantages over single-baseline and multi-baseline CSAR, as 3D imaging is independent of target azimuth scattering consistency and reduces flight experiment complexity. 3D imaging of buildings consists of two key steps: layered focusing based on phase compensation in the wavenumber domain and super-resolution imaging, which solves the defocusing problem and contributes to high-dimensional resolution. Compared with the traditional layered back projection (BP) imaging, the layered focusing method based on phase compensation in the wavenumber domain has a lower computational complexity. Layered focusing combined with super-resolution processing effectively suppresses conical sidelobes, addresses layover issues, and establishes an accurate 3D scattering model. The proposed method was validated using X-band airborne CFASAR data obtained in Rizhao, Shandong Province, China, in 2021. The experimental results indicate that the proposed method has low time complexity, and it can effectively suppress the conical sidelobe of CSAR and realize high-quality 3D reconstruction of buildings.

Airborne multiantenna synthetic aperture radar (SAR) urgently needs the high-precision motion information of each antenna to realize high-precision imaging. Distributed position and orientation system (POS) is an important way to solve this problem based on transfer alignment. Because multiple antennas are usually installed on the flexible and discontinuous structure, there are complex and time-varying relative motions between different antennas. This relative motion will lead to the decline of transfer alignment accuracy and directly affects the imaging accuracy of SAR. To solve this problem, a motion information acquisition algorithm of multiantenna SAR installed on flexible and discontinuous structure based on distributed POS is given. First, the gyroscopes and accelerometers of the distributed POS are used to calculate the relative attitude between nodes, which is applicable to both continuous and discontinuous structure. Second, combining the smooth estimation and the distributed filter, a distributed smoothing algorithm including forward filter and backward smoothing is proposed to calculate the high-precision and smoothed motion data of each subnode. The forward filter obtains the motion parameters of each subnode through transfer alignment based on the above relative attitude data. The backward smoothing further improves the motion information accuracy of subnode by using the measurement data at all time and sharing the data of all nodes. Through the flight imaging test of multiantenna SAR installed on a flexible and discontinuous platform, it is shown that the proposed algorithm can significantly improve the accuracy of the subnode motion data, in which the errors of position, velocity, and attitude are reduced by 58.9%, 61.9%, and 71.2%, respectively. Based on this motion data, SAR achieves better imaging focusing effect.

Airborne array synthetic aperture radar (SAR) has made a significant breakthrough in the three-dimensional resolution of traditional SAR. In the airborne array SAR 3D imaging technology, the baseline length is the main factor restricting the resolution. Airborne array flexible SAR can increase the baseline length to improve the resolution and interference performance by mounting antennae on the wing. The existing research lacks results obtained using flexible actual data processing and specific motion compensation methods. Thus, this paper proposes a motion error estimation and compensation method for an airborne array flexible SAR based on a multi-channel interferometric phase. Firstly, a flexible channel motion compensation model is established based on the multi-channel interference phase of airborne array flexible SAR. Then, based on the rigid multi-channel data, combined with the ground control points, the least square method, and the global optimal search algorithm, the accurate rigid baseline length and the central incidence angle are obtained. Finally, according to the multi-channel interference phase inversion of the flexible motion error and combined with the motion compensation model, the flexible data are compensated in the time domain. The actual results indicate that, compared with traditional motion compensation methods, our method can obtain accurate flexible compensation data. This study improves the interference performance of multi-channel data of airborne array flexible SAR and lays a solid foundation for the high-precision 3D reconstruction of airborne array flexible SAR.

The back-projection (BP) algorithm is completely accurate in the imaging principle, but the computational complexity is extremely high. The single-precision arithmetic used in the traditional graphics processing unit (GPU) acceleration scheme has low throughput and its usage of the video memory is large. An adaptive asynchronous streaming scheme for the BP algorithm based on half-precision is proposed in this study, and then it is extended to the fast back-projection (FBP) algorithm. In this scheme, the adaptive loss factors selection strategy ensures the dynamic range of data, the asynchronous streaming structure ensures the efficiency of large scene imaging, and the mixed-precision data processing ensures the imaging quality. The schemes proposed in this paper are compared with BP, FBP, and fast factorized back-projection (FFBP) algorithms of single-precision in GPU. The experimental results show that the two half-precision acceleration schemes in this paper reduce the video memory usage to 74% and 59% of the single-precision schemes with guaranteed image quality. The efficiency improvements of the proposed schemes are almost one and 0.5 times greater than that of the corresponding single-precision scheme, and the advantage can be more obvious when dealing with large computations.