yuehao guo

Dr. yuehao guo


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 July 2023 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Closed access
XWXianpeng Wang
Xianpeng Wang
YGyuehao guo
yuehao guo
FWFangqing Wen
Fangqing Wen
JHJin He
Jin He
TTTrieu-Kien Truong
Trieu-Kien Truong
The electromagnetic vector sensor (EMVS) embedded multiple-input multiple-output (MIMO) radar, named EMVS-MIMO radar, offers a unique perspective on target localization, providing both two-dimensional (2D) angle and polarization status estimations of targets. However, the current frameworks limit the EMVS-MIMO radar's ability to achieve high-resolution 2D direction finding while maintaining low complexity. To address this limitation, this paper proposes a uniform rectangular array-based methodology with the inter-sensor spacing of the receiving array greater than half-wavelength, along with a high-resolution estimation strategy based on a parallel factor (PARAFAC) model. To optimize the identifiability of the PARAFAC model, the array measurement is first arranged into a third-order tensor, and the 6 possible PARAFAC tensor models are established. Factor matrices are then estimated via PARAFAC decomposition, and 2D direction finding is achieved by combining the spatial rotational invariance technique with the normalized vector-cross product technique. The proposed PARAFAC algorithm can be extended to other sparse uniform geometries, such as L-shaped arrays and parallel linear arrays. The larger array aperture and inherent tensor gain of the proposed PARAFAC approaches offer superior estimation performance compared to existing frameworks. Additionally, the flexibility of the PARAFAC model may make it suitable for single snapshot scenarios. Finally, the improvements of the proposed approaches are validated by numerical simulations.

18 April 2022 in IEEE Transactions on Intelligent Transportation Systems
Verified
Journal Article
Closed access
YGyuehao guo
yuehao guo
XWXianpeng Wang
Xianpeng Wang
XLXiang Lan
Xiang Lan
TSTing Su
Ting Su
As the safety problems and economic losses caused by traffic accidents are becoming more and more serious, intelligent transportation system (ITS) came into being. After the outbreak of COVID-19, how to achieve effective traffic scheduling and macro command under less contact has attracted more attention. Therefore, the location estimation of traffic objectives is a key issue. In the developed framework, for the target parameter estimation in traffic, frequency diversity array multiple-input multiple-output (FDA-MIMO) radar is introduced into ITS, and tensor decomposition is used to process transportation big data (TBD) to improve the real-time performance of target location estimation. Unfortunately, spatial colored noise and array gain-phase error will affect the performance of FDA-MIMO radar in ITS. An algorithm that can solve the angle-range estimation problem of FDA-MIMO radar in the co-existence of array gain-phase error and spatial colored noise is proposed. Firstly, the four-dimensional tensor is constructed by using the temporal un-correlation of colored noise. Therefore, the influence of colored noise in ITS is removed. Secondly, the direction matrix containing target information is obtained by parallel factor (PARAFAC) decomposition. For the array gain-phase error, the optimization problem is constructed, and the Lagrange multiplier is employed to calculate the optimal solution. The effect of gain-phase error is eliminated by utilizing the optimal solution and the direction matrices. Finally, the location information of motor vehicle is achieved by calculating the solution of least square (LS) fitting. The developed scheme can achieve the location information of motor vehicles in the co-existence of array gain-phase error and spatial colored noise. Comprehensive numerical experiments illustrate that the developed scheme in ITS can efficiently obtain the location information of motor vehicles.

4 December 2024 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Closed access
WWWenshuai Wang
Wenshuai Wang
XWXianpeng Wang
Xianpeng Wang
YGyuehao guo
yuehao guo
GGGuan Gui
Guan Gui
The traditional parameter estimation method based on the matrix framework in multiple-input multiple-output (MIMO) radar with sparse arrays loses the information of the tensor signal structure, resulting in performance degradation. Therefore, this paper primarily investigates parameter estimation methods for bistatic MIMO radar based on a tensor decomposition framework. The conventional tensor based on self-correlation discards two virtual array elements, leading to a loss of performance and degrees of freedom (DOFs). To address this issue, this paper proposes a coarray tensor decomposition framework for direction of departure (DOD) and direction of arrival (DOA) estimation, introducing a approach for constructing coarray tensor. First, a virtual difference coarray is constructed using two sub-tensors. Then, a coarray tensor is constructed based on the non-Hermitian structure of the cross-correlation signal matrix. Next, the resulting coarray tensor is reconstructed to achieve optimal source identifiability. Nevertheless, the increase in dimensionality resulting from the reconstructed coarray tensor leads to higher algorithmic complexity. To mitigate this, we perform a real-valued transformation on the reconstructed coarray tensor, which speeds up the execution of the method. Additionally, the proposed method also features the capability to suppress colored noise. Theoretical analysis indicates that the reconstructed coarray tensor has more DOFs than the original coarray tensor. Simulation results show that the proposed method has larger DOFs and good parameter estimation performance.

21 February 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
YGyuehao guo
yuehao guo
XWXianpeng Wang
Xianpeng Wang
JSJinmei Shi
Jinmei Shi
LSLu Sun
Lu Sun
XLXiang Lan
Xiang Lan
Since there is a frequency offset between each adjacent antenna of FDA radar, there exists angle-range two-dimensional dependence in the transmitter. For bistatic FDA-multiple input multiple output (MIMO) radar, range-direction of departure (DOD)-direction of arrival (DOA) information is coupled in transmitting the steering vector. How to decouple the three information has become the focus of research. Aiming at the issue of target parameter estimation of bistatic FDA-MIMO radar, a real-valued parameter estimation algorithm based on high-order-singular value decomposition (HOSVD) is developed. Firstly, for decoupling DOD and range in transmitter, it is necessary to divide the transmitter into subarrays. Then, the forward–backward averaging and unitary transformation techniques are utilized to convert complex-valued data into real-valued data. The signal subspace is obtained by HOSVD, and the two-dimensional spatial spectral function is constructed. Secondly, the dimension of spatial spectrum is reduced by the Lagrange algorithm, so that it is only related to DOA, and the DOA estimation is obtained. Then the frequency increment between subarrays is used to decouple the DOD and range information, and eliminate the phase ambiguity at the same time. Finally, the DOD and range estimation automatically matched with DOA estimation are obtained. The proposed algorithm uses the multidimensional structure of high-dimensional data to promote performance. Meanwhile, the proposed real-valued tensor-based method can effectively cut down the computing time. Simulation results verify the high efficiency of the developed method.

27 June 2023 in Electronics
Verified
Journal Article
Open access
PDF file
贵蔡贵忠 蔡
贵忠 蔡
XWXianpeng Wang
Xianpeng Wang
JSJinmei Shi
Jinmei Shi
XLXiang Lan
Xiang Lan
TSTing Su
Ting Su
YGyuehao guo
yuehao guo
Single sensors often fail to meet the needs of practical applications due to their lack of robustness and poor detection accuracy in harsh weather and complex environments. A vehicle detection method based on the fusion of millimeter wave (mmWave) radar and monocular vision was proposed to solve this problem in this paper. The method successfully combines the benefits of mmWave radar for measuring distance and speed with the vision for classifying objects. Firstly, the raw point cloud data of mmWave radar can be processed by the proposed data pre-processing algorithm to obtain 3D detection points with higher confidence. Next, the density-based spatial clustering of applications with noise (DBSCAN) clustering fusion algorithm and the nearest neighbor algorithm were also used to correlate the same frame data and adjacent frame data, respectively. Then, the effective targets from mmWave radar and vision were matched under temporal-spatio alignment. In addition, the successfully matched targets were output by using the Kalman weighted fusion algorithm. Targets that were not successfully matched were marked as new targets for tracking and handled in a valid cycle. Finally, experiments demonstrated that the proposed method can improve target localization and detection accuracy, reduce missed detection occurrences, and efficiently fuse the data from the two sensors.

21 March 2025 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
YSYunye Su
Yunye Su
XWXianpeng Wang
Xianpeng Wang
DMDandan Meng
Dandan Meng
YGyuehao guo
yuehao guo
With the rapid development of autonomous unmanned systems, the internet of unmanned agents (IUA) has emerged as a prominent research field. Direction of Arrival (DOA) estimation enables intelligent base stations (IBS) to detect the direction of unmanned device, facilitating essential functions such as target localization and tracking, and cooperative navigation, significantly enhancing the environmental perception capabilities and task execution efficiency of IUA systems. However,the traditional DOA estimation algorithms in practical complex electromagnetic mutual coupling environments are computationally intensive, incompatible with IUA’s high real-time requirements. To address these challenges, this paper proposes a data-driven (DD) DOA estimation method for unmanned device localization in IUA. The IUA localization system comprises four IBS equipped with uniform linear arrays (ULAs). Device localization is achieved through DOA estimates from these four IBS. A Deep Learning (DL) is proposed to jointly address two key challenges: IUA’s demand for real-time algorithm performance and mutual coupling effects between IBS sensors. A novel DL architecture is designed to estimate off-grid angle parameters and mutual coupling coefficients. The framework incorporates two learnable modules, one focusing on mutual coupling coefficients and another aimed at precise DOA estimation and associated confidence levels. The target unmanned device position is estimated using the least squares method applied to the DOA measurements from all IBSs. The proposed DL-based algorithm surpasses existing methods while maintaining low computational complexity. Extensive simulations demonstrate the high performance and real-time capabilities of the DD-based solution.