4 December 2024 in IEEE Transactions on Aerospace and Electronic Systems
The traditional parameter estimation method based on the matrix framework in multiple-input multiple-output (MIMO) radar with sparse arrays loses the information of the tensor signal structure, resulting in performance degradation. Therefore, this paper primarily investigates parameter estimation methods for bistatic MIMO radar based on a tensor decomposition framework. The conventional tensor based on self-correlation discards two virtual array elements, leading to a loss of performance and degrees of freedom (DOFs). To address this issue, this paper proposes a coarray tensor decomposition framework for direction of departure (DOD) and direction of arrival (DOA) estimation, introducing a approach for constructing coarray tensor. First, a virtual difference coarray is constructed using two sub-tensors. Then, a coarray tensor is constructed based on the non-Hermitian structure of the cross-correlation signal matrix. Next, the resulting coarray tensor is reconstructed to achieve optimal source identifiability. Nevertheless, the increase in dimensionality resulting from the reconstructed coarray tensor leads to higher algorithmic complexity. To mitigate this, we perform a real-valued transformation on the reconstructed coarray tensor, which speeds up the execution of the method. Additionally, the proposed method also features the capability to suppress colored noise. Theoretical analysis indicates that the reconstructed coarray tensor has more DOFs than the original coarray tensor. Simulation results show that the proposed method has larger DOFs and good parameter estimation performance.
21 August 2025 in Signal Processing
17 April 2026 in IEEE Transactions on Aerospace and Electronic Systems
The monostatic frequency diverse array multiple-input multiple-output (FDA-MIMO) radar with unfolded coprime framework has an enlarged array aperture and extended signal bandwidth, which can significantly improve the resolution of range and angle parameter estimation for FDA-MIMO radar. Furthermore, tensor analysis techniques can effectively exploit the multidimensional structural characteristics inherent in signals to achieve superior estimation performance. Therefore, this paper mainly employs tensor analysis to improve the parameter estimation performance of FDA-MIMO radar, and proposes a joint angle and range estimation algorithm based on coupled canonical polyadic decomposition (C-CPD). The proposed algorithm first models the received signal as a third-order tensor. Then, based on the structure of the Vandermonde-like matrix, a C-CPD model is designed. Subsequently, the alternating least squares (ALS) technique is utilized to obtain steering matrix estimates. Finally, the coprime characteristic is exploited to resolve phase ambiguity of the array framework, and least squares fitting is employed to obtain angle and range estimates. Simulation experiments demonstrate the superiority and effectiveness of the proposed algorithm.
28 May 2026 in IEEE Transactions on Aerospace and Electronic Systems
Joint direction of arrival (DOA) and direction of departure (DOD) estimation algorithms based on tensor decomposition can enhance the angle estimation performance of bistatic multiple-input multiple-output (MIMO) radar by exploiting the multi-dimensional information of received signal data. However, conventional tensor decomposition techniques fail to exploit the Vandermonde structure information in the received signal model. Therefore, this paper proposes a joint DOA and DOD estimation algorithm based on structured tensor decomposition for bistatic MIMOradar. First, a structured fourth-order tensor is constructed by exploiting the non-centro-Hermitian property of the received third-order tensor signal and the exponential Vandermonde structure of its factor matrices. Then, combined with the Hankel transformation technique, rank-1 constraints are introduced for alternating iterative optimization to achieve structured tensor de composition and obtain estimations of the factor matrices. Finally, the least squares approach is applied to derive the estimations of DOD and DOA. The effectiveness and superiority of the proposed algorithm are validated by the simulation results.