The effects of ball milling on the physicochemical, functional, and emulsification characteristics of Polygonatum sibiricum insoluble dietary fiber (PIDF) were investigated. Through controlling milling time (4, 5, 6, 7, and 8 h), five PIDFs (PIDF-1, PIDF-2, PIDF-3, PIDF-4, and PIDF-5) were obtained. The results showed that ball milling effectively decreased the particle size and increased the zeta-potential of PIDF. Scanning electron microscope results revealed that PIDF-5 has a coarser microstructure. All PIDF samples had similar FTIR and XRD spectra. The functional properties of PIDF were all improved to varying degrees after ball milling. PIDF-3 had the highest water-holding capacity (5.12 g/g), oil-holding capacity (2.83 g/g), water-swelling capacity (3.83 mL/g), total phenol (8.12 mg/g), and total flavonoid (1.91 mg/g). PIDF-4 had the highest ion exchange capacity. Fat and glucose adsorption capacity were enhanced with ball milling time prolongation. PIDF-5 exhibited a contact angle of 88.7° and lower dynamic interfacial tension. Rheological results showed that PIDF-based emulsions had shear thinning and gel-like properties. PE-PIDF-5 emulsion had the smallest particle size and the highest zeta-potential value. PE-PIDF-5 was stable at pH 7 and high temperature. The findings of this study are of great significance to guide the utilization of the by-products of Polygonatum sibiricum.

The purpose of this study was to investigate the effects of Polygonatum sibiricum (P. sibiricum) on microbial fermentation, physicochemical properties, and functional properties of fermented soymilk. Three types of fermented soymilk were prepared. The first type was fermented directly from regular soymilk (fermented soymilk, FSM), and the other two were fermented after adding P. sibiricum (P. sibiricum fermented soymilk, P-FSM) or P. sibiricum polysaccharides (P. sibiricum polysaccharides fermented soymilk, PP-FSM). The differences in physical and chemical indexes such as pH value, acidity, and water-holding capacity were mainly compared, and the differences in the contents of functional components such as total phenols, total flavonoids, soy isoflavones, γ-aminobutyric acid, and organic acids were compared. The functionalities of the three samples in terms of antioxidant activity were evaluated, and the relevance of each active substance was explored. Compared with the FSM group, the addition of P. sibiricum and P. sibiricum polysaccharides could not only significantly promote the fermentation of Lactobacillus but also significantly improve the stability of the finished products during storage and prolong the shelf life of the finished product. The conversion rates of glycoside soybean isoflavones in the PP-FSM and P-FSM groups were 73% and 69%, respectively, which were significantly higher than those in the FSM group (64%). At the end of fermentation, the γ-aminobutyric acid contents of the PP-FSM and P-FSM groups were 383.66 ± 1.41 mg/L and 386.27 ± 3.43 mg/L, respectively, while that of the FSM group was only 288.66 ± 3.94 mg/L. There were also great differences in the content and types of organic acids among the three samples, especially lactic acid and acetic acid. By comparing the antioxidant capacity of DPPH (1,1-Diphenyl-2-picrylhydrazyl free radical), AB-TS (2,2′-Azinobis-3-ethylbenzthiazoline-6-sulphonate), and iron chelation, it was found that both PP-FSM and P-FSM were superior to FSM, and the antioxidant capacity had a certain correlation with the contents of total phenols and total flavonoids.

In this study, ultra–high–pressure sterilization (UHPS) of Xinli No. 7 juice (XL7) was explored and optimized. A challenge to implement UHPS in juice as a full alternative to thermal treatment could be represented by the adoption of a pressure level of up to 500 MPa for 20 min at one cycle followed by the packaging in aseptic conditions. It was found that UHPS and HS treatments could effectively kill the microorganisms in XL7 juice but HS treatment would inevitably lose the nutritional quality in the juice, while UHPS treatment could better maintain the glyconic acid content, functional components, and antioxidant activity and reduce Browning degree and improve the stability of XL7 juice. The deterioration rate of UHPS and HS–treated XL7 juice increased with the increased storage temperature. The predicted shelf life of UHPS and HS–treated XL7 juice was 68 and 41 days at 4 °C, respectively. Collectively, UHPS treatment combined with low–temperature storage might be an effective way to prolong the shelf life of XL7 juice.