The indiscriminate use of naproxen as an anti-inflammatory has been the leading cause of pollution in sewage effluents. Conversely, titanium dioxide is one of the most promising photocatalyst for the degradation of pollutants. Ti-La mixed oxides containing 0, 1, 3, 5, and 10 wt.% of lanthanum were synthetized by sol-gel and tested as photocatalysts in the degradation of naproxen (NPX). The materials were further characterized by X-ray diffraction (XRD), nitrogen physisorption (BET), scanning electron microscopy (SEM), UV-Vis and Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The XRD patterns resembled that of anatase titania. The Eg values, determined from the UV-Vis spectra, vary from 2.07 to 3.2 eV corresponded to pure titania. The photocatalytic activity of these materials showed a degradation of naproxen from 93.6 to 99.8 wt.% after 4 h under UV irradiation.
Pure TiO2 synthesized by the sol-gel method and subsequently deposited at 5% by weight with Co, Cu, Fe, and Ni ions by the deposition–precipitation method was studied as photocatalysts. The nanomaterials were analyzed by SEM, TEM, UV-Vis DRS, DRX, Physisorption N2, and XPS. The SEM and TEM images present a semi-spherical shape with small agglomerations of particles and average size between 63 and 65 nm. UV-Vis results show that a reduction below 3.2 eV exhibits a redshift displacement and increment in the optical absorption of the nanoparticles promoting the absorption in the UV-visible region. XRD spectra and analysis SAED suggest the characteristic anatase phase in TiO2 and deposited materials according to JCPDS 21-1272. The specific surface area was calculated and the nanomaterial Ni/TiO2 (21.3 m2 g−1) presents a slight increment when comparing to TiO2 (20.37 m2g−1). The information generated by the XPS spectra present the deposition of metallic ions on the support and the presence of different valence states for each photocatalyst. The photocatalytic activity was carried out in an aqueous solution with 80 mg L−1 of 2,4-D or 2,4-DCP under UV light (285 nm) with 100 mg L−1 of each photocatalysts for 360 min. The nanomaterial that presented the best efficiency was Ni/TiO2, obtaining a degradation of 85.6% and 90.3% for 2,4-D and 2,4-DCP, respectively. Similarly, this material was the one that presented the highest mineralization, 68.3% and 86.5% for 2,4-D and 2,4-DCP, respectively. Photocatalytic reactions correspond to the pseudo-first-order Langmuir–Hinshelwood model.
An effective way to obtain the optimal parameters of a process or experiment is the response surface method. Using the Box–Behnken design further decreases the number of experiments needed to obtain sufficient data to obtain a reliable equation. From the equation, it is possible to predict the behavior of the response with respect to the combination of variables involved. In this study we evaluated the photocatalytic activity of the synthesized TiO2 for the degradation of acetaminophen, a frequently used and uncontrolled drug that has been detected with increasing frequency in wastewater effluents. The variables used for this study were pH, contaminant concentration (acetaminophen) and catalyst dose. We found, with a 95% confidence level, that 99% of the contaminant can be degraded to pH 10, contaminant to 35 mg/L and a catalyst dose of 0.15 g TiO2.
The pharmaceutical industry is a major source of pollution in wastewater effluents, characterized by chemical residues that are complex and difficult to degrade. Naproxen, a commonly detected drug in sewage effluents, exceeds safe concentrations for aquifers and is highly persistent, posing significant risks to aquatic life and ecosystems. This drug is known to cause long-term side effects in humans, such as gastrointestinal ulcers and nephrosis, associated with frequent and prolonged use. Additionally, the recent pandemic has led to a marked increase in drug consumption over a short period, exacerbating environmental contamination. Titanium dioxide has been extensively used as a photocatalyst in recent decades, proving effective in reducing these emerging pollutants. In this study, TiO2 doped with cerium was synthesized using the sol–gel method, with cerium concentrations varied at 1, 3, 5, and 10% by weight. The resulting nanocatalysts were characterized through nitrogen physisorption, scanning electron microscopy (SEM), X-ray diffraction (XRD), and UV-Vis diffuse reflectance spectroscopy. Photocatalytic activity was assessed using a UV-Vis spectrophotometer to monitor the degradation of the drugs. XRD analysis confirmed the crystallinity and anatase phase of TiO2. UV-Vis diffuse reflectance spectra indicated a decrease in bandgap energy of up to 3.00 eV compared to pure TiO2. The materials demonstrated significant degradation of naproxen (NPX) and acetaminophen (ACTP), both prepared at 30 ppm, over a 6 h reaction period.