The modular high temperature gas-cooled reactor (MHTGR) based nuclear steam supplying system (NSSS) is constituted by an MHTGR, a once-through steam generator (OTSG) and can generate superheated steam for industrial heat or electric power generation. The wide range closed-loop stability is achieved by the recently proposed coordinated control law, in which the neutron flux and the temperatures of both main steam and primary coolant are chosen as controlled variables, and the flowrates of both primary and secondary loop and the control rod speed are chosen as manipulated variables. However, the thermal power is only controlled in open loop manner and hence could be further optimized through feedback. Motivated by this, a dynamic matrix control (DMC) is proposed for optimizing the thermal power of MHTGR based NSSS. A simple step-response model with the thermal power response data is utilized in designing the DMC. The design objective of DMC is to optimize the deviation of the thermal power from its reference under its rate constraint. Then, by the virtue of strong stability of existing control law and optimization ability of DMC, a cascade control structure is implemented for the thermal power optimization, with the coordinated control law in the inner loop and DMC in the outer loop. Numerical simulation results show the satisfactory improvement of thermal power response. This cascade control structure inherits the advantages of both proportional-integral-differential (PID) control and DMC, by which the zeros offset and the short settling time of thermal power are realized.
Fluid flow networks (FFNs) can be utilized to integrate multiple once-through heat supply system (OTHSS) modules based on either the same or different energy resources such as the renewable, nuclear and fossil for multi-modular and hybrid energy systems. Modeling and control is very important for the safe, stable and efficient operation of the FFNs, whose objective is to maintain both the flowrates and pressure-drops of the network branches within specific bounds. In this paper, a differential-algebraic nonlinear dynamic model for general FFNs with multiple pump branches is proposed based on both the branch hydraulics and network graph properties. Then, an adaptive decentralized FFN flowrate-pressure control law, which takes a proportional-integral (PI) form with saturation on the integral terms, is established. This newly-built control not only guarantees satisfactory closed-loop global stability but also has no need for the values of network hydraulic parameters. This adaptive control is then applied to the flowrate-pressure regulation of the secondary FFN of a two-modular nuclear-solar hybrid energy system and numerical simulation results show the feasibility and high performance of this network control strategy. Due to its concise form, this new flowrate-pressure FFN controller can be easily implemented practically.
Timely detection of anomalies in nuclear power plants (NPPs) is essential for operational safety, especially under conditions where process signals deviate gradually or abruptly from nominal patterns. Traditional detection methods often struggle to adapt under transient conditions or in the absence of well-labeled fault data. To address this challenge, we propose KD-ADWIN, an adaptive concept drift-detection framework designed for unsupervised anomaly detection in dynamic industrial environments. The method integrates three core components: a Kalman-based prediction module to extract smoothed signal trends, a multi-channel detection strategy combining statistical and derivative-based drift indicators, and an adaptive thresholding mechanism that tunes detection sensitivity based on local signal variability. Evaluations on a synthetic dataset show that KD-ADWIN accurately detects both abrupt and gradual drifts, outperforming classical baselines. Further validation using full-scope simulation data from a modular high-temperature gas-cooled reactor (MHTGR) demonstrates its effectiveness in identifying concept drifts under realistic actuator and sensor fault conditions.
High software reliability is essential for safety-critical systems in nuclear power plants. To improve the quality of software following the requirements phase, requirements inspections are conducted to detect defects. Traditional approaches enhance inspection outcomes by employing more effective techniques or by increasing team redundancy. This study investigates an alternative approach: introducing diversity within the inspection team. Inspection technique diversity and inspector background diversity are considered in this paper. We hypothesize that an inspection team in which the inspectors use diverse inspection techniques or have diverse backgrounds will have a better performance in defect detection compared to an inspection team with no diversity. This is because diversity can reduce the number of dependent failures in an inspection team. In this study, a controlled experiment is designed and conducted to examine our hypothesis. In the experiment, research subjects with different backgrounds inspect a software requirements specification using different inspection techniques. The results are collected and analyzed statistically. The experiment shows that using diverse techniques in an inspection team can improve the performance of the inspection team; however, using inspectors with diverse backgrounds will not affect the performance of an inspection team significantly.