Youjing Wang

Dr. Youjing Wang

Petrochina Research Institute of Petroleum Exploration and Development, Beijing 100083, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 October 2023 in Processes
Verified
Journal Article
Open access
PDF file
FMFanle Meng
Fanle Meng
Youjing WangYoujing Wang
Youjing Wang
FMFanle Meng
Fanle Meng
MHMingqiang Hao
Mingqiang Hao
GQGuosheng Qin
Guosheng Qin
DWDong Wang
Dong Wang
Hydraulic fracturing of horizontal wells is a common method for enhancing production in low-permeability and unconventional oil reservoirs. However, due to the interference between fractures, issues such as decreased production and water channeling often occur in hydraulic fracturing of horizontal wells. Therefore, studying how to mitigate the effects of fracture interference is of great significance for optimizing hydraulic fracturing design and improving oil and gas recovery rates. In this paper, an oil–water two-phase discrete fracture model was established, and the grid dissection was carried out by using the optimization method to obtain a triangular grid that can finely characterize the fracture in geometry. Then, typical discrete fracture models were designed, and the influences of the fracture permeability ratio, absolute fracture scale, oil–water viscosity ratio, and fracture length on the fracture flow interference were investigated separately. The degree of fracture interference was evaluated using the fracture fractional flow rate ratio, remaining oil saturation, and sweep efficiency. This study verified fracture interaction and identified that the threshold value of the fracture permeability ratio is 9 to classify the degree of interference. Sensitivity analysis shows that the absolute size of the fracture has a significant impact on fracture interference, while the impact of the oil–water viscosity ratio and fracture length on fracture interference is relatively small.

11 October 2022 in Minerals
Verified
Journal Article
Open access
PDF file
Youjing WangYoujing Wang
Youjing Wang
XSXinmin Song
Xinmin Song
The generation of dynamic fractures during the process of water injection in ultra-low permeability reservoirs aggravates the heterogeneity of the reservoir, resulting in a rapid rise of water cut and directional flooding of the producers, which affects waterflood sweep efficiency and recovery. A dynamic fracture, as the geological feature of ultra-low permeability reservoirs, has a complex genetic mechanism and is difficult to characterize. Taking the Chang 6 reservoir of the Triassic Yanchang Formation in the Ordos Basin of central China as an example, this paper presents the characterization method and workflow of dynamic fractures. On the one hand, through the analysis of triaxial-compression rock-mechanic experiments and the mineral composition of the core, we evaluated rock brittleness in order to identify the lithology that can easily generate new fractures. On the other hand, beginning with the ancient tectonic stress field and combining the fracture characteristics of core and geological outcrop, the multi-fractal method and the probabilistic neural network were applied to identify the natural fractures and to quantitatively predict the intensity of natural fractures. Based on the rock brittleness evaluation and the natural fracture feature, the intensity of dynamic fractures was characterized by integrating the analysis of the bottom hole pressure, fracture pressure, and production response characteristics. A dynamic fracture is a “double-edged sword” during the waterflooding development of ultra-low permeability reservoirs. The premature activation and generation of dynamic fractures could lead to a worse development status. Nevertheless, the rational control and utilization of dynamic fractures play a positive role in improving oil recovery. Dynamic fractures are of great significance to the optimization and adjustment of well patterns for ultra-low permeability reservoirs. This can provide a reference for similar reservoirs.

9 April 2024 in Frontiers in Earth Science
Verified
Journal Article
Open access
YQYou Qi
You Qi
Youjing WangYoujing Wang
Youjing Wang
GQGuosheng Qin
Guosheng Qin
YSYanchen Song
Yanchen Song
HZHualing Zhang
Hualing Zhang
FMFanle Meng
Fanle Meng
By using equipment such as time-lapse cameras and 3D laser scanners, this study conducted flume simulation experiments to obtain topographic elevation, the amount of sediment increment, sedimentary cross sections, and other related data and diagrams. Quantitative software was then utilized for sedimentological analysis to clarify the depositional evolution, architecture, and depositional model of lobate shallow-water deltas. The research results show that under the influence of hydraulic conditions and main distributary channels, lobate shallow-water deltas primarily undergo three evolution stages: initial channel formation, distributary channel system formation, and continuous stable evolution stage. The architecture elements of lobate shallow-water deltas can be divided into distributary channels dominated by channel deposition, proximal river mouth bars, transitional bars, and distal bars. The lateral composition and downstream deposition of the river-bar combination are the main structural units of the shallow water delta. The proximal profile distributary channels exist in the form of thick channel sand bodies with multiple repetitive intercalation cycles, and thick proximal bar deposits form on both sides of the distributary channels. The bifurcation of distributary channels in the middle profile leads to a reduction in channel scale, while large-scale proximal bars still develop on both sides of the channel. In the distal profile, a substantial river mouth bar complex is formed at the break of the delta front slope, and with the gradual progradation of the delta, the river mouth bar deposition zone becomes flattened. Based on the insights of the flume simulation experiments, a sedimentary model for lobate shallow-water delta was established.

23 March 2024 in Geofluids
Verified
Journal Article
Open access
PDF file
ZMZunjing Ma
Zunjing Ma
YZYingchun Zhang
Yingchun Zhang
Youjing WangYoujing Wang
Youjing Wang
YLYancheng Liu
Yancheng Liu
The relationship between biodegraded oil and its source has long been a complex and contentious topic. The Western Halaalate area is located in the Piedmont area on the northwest margin of the Junggar Basin. Source rocks of the Fengcheng Formation exist both locally and in the nearby Mahu Depression. In order to determine the source of biodegraded crude oil in this area, the molecular marker characteristics of biodegraded crude oil were analyzed by gas chromatography-mass spectrometry. The results showed that the vitrinite reflectance (Ro) of source rocks of the Permian Fengcheng Formation in the nearby Mahu Depression is greater than 1.3 and has entered a high mature stage of condensate oil and moisture gas; the source rock of Permian Fengcheng Formation in Western Halaalate area is in a mature stage with Ro of 0.791.13. The ascending configuration of tricyclic terpenes C20-C21-C23 for the crude oil samples found in the Carboniferous strata of the Western Halaalate Area is consistent with the characteristics of the Fengcheng Formation source rocks, which are present in both the Western Halaalate Area and the nearby Mahu Depression. Chromatography spectrometry examination shows that crude oils have undergone a varying degree of biodegradation. The Carboniferous oil was originated from the in situ Fengcheng Formation source rocks based on the application of molecular markers resistant to biodegradation, such as maturity parameters, salinity parameters, the new gammacerane index, and aromatic hydrocarbon parameters, combined with the analysis of hydrocarbon migration pathway. In addition, the oil biodegradation alteration rules in the Western Halaalate area were clarified, which advances regional knowledge of the relationship between biodegraded oil and source rocks.

21 February 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
DHDerong Huang
Derong Huang
XSXinmin Song
Xinmin Song
Youjing WangYoujing Wang
Youjing Wang
GQGuosheng Qin
Guosheng Qin
Various glutenite reservoirs, developed by fans, can be found in the Junggar Basin. Among these, there are different interpretations of the glutenite reservoirs formed by shallow-water fan deltas in the Triassic system in the northwestern margin of the basin. The characteristics of these deltas and their reservoir architecture have not been understood clearly. It seriously restricts the advancement of the subsequent development of the oilfield. Therefore, it is of great significance to carry out the fine reservoir architecture characterization of the shallow-water fan delta in this area. In this study, the upper member of the Triassic Karamay Formation in the Bai 21 area was selected as the study site. Through core analysis, nine types of sedimentary microfacies, including mudflow deposit, braided river, flood plain, underwater main channel, underwater distributary channel, overbank channel, interchannel deposition, estuary bar, and sheet sand, are found. Through mixed-phase wavelet frequency extension, the main frequency of seismic data is moderately increased and the frequency band is broadened, which makes it possible to identify the thin layer of about 10 m. Through continuous stratal slicing, the thin-layer sedimentary bodies that are difficult to be distinguished in the vertical direction are depicted, and the distribution of sedimentary bodies at different vertical positions is obtained by browsing the slices. Through color fusion based on seismic frequency decomposition, the fusion results contain information reflecting the thickness, and the characterization effect of the fan boundary is significantly improved. In summary, this study depicts the distribution of single-stage fans and recognizes the sand body development characteristics of the two-stage fans. Research suggests that two large shallow-water fan-delta complexes were discovered in the S3 sand group within the study area. Each fan possesses a multilevel branching distributary channel system, resulting in multiple horizontally oriented lobes. Within the fan-delta complex in S3, which is the third sand group in the Upper Triassic Karamay Formation, the fan complex can be divided into two single-stage fans recorded in the sublayer S31 and S32 upward. The two-stage fan deltas show inherited development characteristics in sedimentary characteristics and form in a regression sequence. The sand bodies formed during the low-water-level stage in S31 are thick, with few interlayers developed. Most sand bodies intersect each other vertically. In the shallow fan delta, a widespread estuary bar is deposited, which develops along the underwater distributary channel. This research enhances the understanding of shallow-water fan-delta reservoirs in the study area, and it provides a precise target for oilfield development and solves the key problem of unclear understanding of sand body distribution and combination relationships, which restricts development.

17 January 2026 in Minerals
Verified
Journal Article
Open access
PDF file
YLYuxin Liang
Yuxin Liang
XSXinmin Song
Xinmin Song
Youjing WangYoujing Wang
Youjing Wang
WFwenjie feng
wenjie feng
This study systematically investigates the lithofacies, sedimentary microfacies, vertical evolution, and spatial distribution of the braided river delta–shallow lacustrine carbonate mixed sedimentary rocks of the Upper Ganchaigou Formation in the Huatugou Oilfield of the Qaidam Basin, China. This study integrates data from field outcrops, core observations, thin section petrography, laboratory analyses, and well-logging interpretations. Based on these datasets, the sedimentary characteristics are identified, and a comprehensive sedimentary model is constructed. The results reveal that the study area contains five clastic facies, three types of mixed sedimentary facies, and ten sedimentary microfacies. Two distinct modes of mixed sedimentation are recognized: component mixing and stratigraphic mixing. A full lacustrine transgression–regression cycle is formed by the two types of mixed sedimentation characteristics, which exhibit noticeable differences in vertical evolution. Component mixing, which occurs in a mixed environment of continuous clastic supply and carbonate precipitation during the transgression, is the primary characteristic of the VIII–X oil formation. The mixed strata that make up the VI–VII oil formation show rhythmic interbedding of carbonate and clastic rocks. During the lacustrine regression, it shows the alternating sedimentary environment regulated by frequent variations in lacustrine levels. The planar distribution is affected by both intensity of sediment from the west and the changes in lacustrine level. During the lacustrine transgression, it is dominated by littoral-shallow lacustrine mixed beach bar and mixed sedimentary delta. On the other hand, during the lacustrine regression, it is dominated by laterally amalgamated sand bodies in the braided-river delta front. Based on this, a mixed sedimentary evolution model controlled by the coupling of “source–lacustrine level” is established. It offers a guide for reconstructing the sedimentary environment in basins that are similar to it and reveals the evolution path of mixed sedimentation in the short-axis source area of arid saline lacustrine basins.