In a singular period, such as during a pandemic, the use of personal protective masks can become mandatory for all citizens in many places worldwide. The most used device is the disposable mask that, inevitably, generates a substantial waste flow to send to incineration or landfill. The article examines the most diffused type of disposable face mask and identifies the characteristic of the constituent materials through morphological, chemical, physical, and thermal analyses. Based on these investigations, a mechanical recycling protocol with different approaches is proposed. Advantages and disadvantages of the different recycling solutions are discussed with considerations on necessary separation processes and other treatments. The four solutions investigated lead to a recycling index from 78 to 91% of the starting disposable mask weight. The rheological, mechanical, and thermo-mechanical properties of the final materials obtained from the different recycling approaches are compared with each other and with solutions present on the market resulting in materials potentially industrially exploitable.
In this work, blends that were based on first use PP added with talc (PPt) and recycled polypropylene (r-PP) were designed and formulated, aiming at producing filaments that are suitable for 3D printing fused filament fabrication (FFF) processes. A preliminary characterization of PPt/r-PP blends at different weight ratios allowed selecting two systems showing adequate rheological behavior for FFF. The selected blends were melt compounded in a twin-screw extruder, optimizing the processing conditions through a design of experiments approach, involving the use of Taguchi’s method. The materials that were prepared with the optimized processing conditions, hence showing the best performance in terms of rheological behavior and thermal characteristics, were then selected for the production of the filament and for the subsequent FFF processing. Finally, the morphology of the filament and the mechanical properties of 3D-printed samples were assessed, demonstrating the achievement of satisfactory results in terms of performances. In general, the obtained results clearly demonstrated that a proper optimization of both material and processing conditions offers the possibility of using recycled PP-based formulations for additive manufacturing processes, hence allowing a remarkable valorization of a low added-value material through its utilization for an innovative and sustainable manufacturing approach.
Polymer structuring is a valuable cost- and time-saving strategy for the production of high-performance polymer-based materials. The main issue in the spreading of this approach lies in the understanding of the relationships between the processing parameters, the microstructure and the resulting properties, which represent fundamental factors in the actual defining of the final characteristics owing to the production method employed. The aim of the present work is to provide a wide overview of the currently available knowledge on solvent-free approaches for obtaining structured materials, specifically focusing on extrusion- and injection molding-based technologies, given their relevance as the most industrially exploited methods for the melt processing of thermoplastic materials. Additionally, particular attention will be paid to the relationships between the variation in the processing parameters and the resulting flow fields (both shear and elongational), considering their role in the definition of microstructure.
The purpose of this work was to evaluate and improve the flammability and combustion behavior of the polyethylene-based material obtained from the recycling of Tetra Pak® (PEAL) to widen its use to applications where these properties are required. Firstly, its thermal stability was investigated with thermogravimetric analysis, resulting in an enhancement in the main degradation step temperature (from 385 °C to 421 °C) due to the presence of the aluminum-flakes. Then, to improve the poor flammability (HB in UL-94 test) and combustion behavior (Fire Performance Index of 0.07) of the raw material, two flame retardant approaches were tested: an intumescent system made of ammonium polyphosphate and pentaerythritol, and magnesium hydroxide. In addition, the effectiveness of polyethylene as a charring agent was evaluated. Characterization was made with UL-94, cone calorimeter, and morphologic analysis. For all the materials tested, the temperature of the main weight loss step increased and the flammability rating improved (V2 for intumescent and V0 for magnesium hydroxide reached). Moreover, fire hazard decreased (Fire Performance Index of 0.15 and 0.55; Flame Retardancy Index of 2.6 and 10.0). Referring to the morphology, full compatibility was found in the PEAL–magnesium hydroxide compound, while PEAL-intumescent appeared as a heterogeneous system.
In this work, a multivariate approach was utilized for gaining some insights into the processing–structure–properties relationships in polyethylene-based blends. In particular, two high-density polyethylenes (HDPEs) with different molecular weights were melt-compounded using a twin-screw extruder, and the effects of the screw speed, processing temperature and composition on the microstructure of the blends were evaluated based on a Design of Experiment–multilinear regression (DoE-MLR) approach. The results of the thermal characterization, interpreted trough the MLR (multilinear regression) response surfaces, demonstrated that the composition of the blends and the screw rotation speed are the two most important parameters in determining the crystallinity of the materials. Furthermore, the rheological data were examined using a Principal Component Analysis (PCA) multivariate approach, highlighting also in this case the most prominent effect of the weight ratio of the two base polymers and the screw rotation speed.
In this work, the relationships between the processing parameters and the microstructure in melt‐compounded polyamide 6 (PA6) are investigated. To this aim, two PA6 having different viscosities are processed in a twin‐screw extruder at two different screw speeds (150 or 300 rpm) and characterized through rheological and thermal analyses. Furthermore, the thermo‐mechanical field along the screw is simulated using Ludovic® software, and the obtained results in terms of shear rate, residence time, and actual temperature are exploited to disclose interesting processing/microstructure relationships. In particular, the antagonistic role of the flow‐induced crystallization (FIC) and memory effect in governing the final microstructure is assessed. Specifically, for high screw speed and viscosity, FIC outweighs the memory effect due to the higher shear rate and temperature experienced by the material during processing. Besides, the dominant influence of FIC over the memory effect is found to be responsible for the higher overall crystallinity and α/γ content observed for the materials processed at 300 rpm. Finally, the same analyses are performed on blends containing different relative contents of the two PA6, demonstrating the interdependency of the screw speed and viscosity effects on the resulting microstructure.Highlights: Processing parameters/microstructurerelationships for PA6 are investigated. PA6 with different viscosities wasmelt compounded using two screw speeds. Shear rate, temperature and residencetime during the processing were simulated. Screw speed and viscosity affectflow‐induced crystallization and memory effect. High screw speed and viscositypromoted FIC over the memory effect.