We present an interband cascade infrared photodetector based on Ga-free type-II superlattice absorbers. Substituting the more standard InAs/GaSb superlattice for a Ga-free superlattice with InAs/InAsSb requires an inverted carrier extraction path. A hole-ladder in the electron-barrier, instead of an electron-ladder in the hole-barrier, is employed to achieve photovoltaic operation. At elevated temperatures, seven negative-differential-conductance (NDC) regions are observed that arise from electrons tunneling through the electron barriers of the seven cascade stages. The detector operates in the photovoltaic mode at room temperature with a cutoff wavelength of 8.5 μm. At the NDC regions, the device features responsivity peaks under laser illumination reaching 0.45 A/W at room temperature at = 5.27 μm. This exceeds its highest measured low-temperature value of 0.22 A/W at this wavelength by a factor of 2.
Resonant tunneling diode photodetectors appear to be promising architectures with a simple design for mid-infrared sensing operations at room temperature. We fabricated resonant tunneling devices with GaInAsSb absorbers that allow operation in the μm range with significant electrical responsivity of 0.97 A/W at 2004 nm to optical readout. This paper characterizes the photosensor response contrasting different operational regimes and offering a comprehensive theoretical analysis of the main physical ingredients that rule the sensor functionalities and affect its performance. We demonstrate how the drift, accumulation, and escape efficiencies of photogenerated carriers influence the electrostatic modulation of the sensor’s electrical response and how they allow controlling the device’s sensing abilities.
The detectivity enhancement in a double-pass architecture in an interband cascade infrared photodetector (ICIP) is investigated. The ICIP consists of twelve identically thick absorbers composed of an InAs/GaSb type-II superlattice. To achieve a double-pass of radiation, a multilayer backside mirror was sputter-deposited after thinning the undoped GaSb substrate. At room temperature, a differential resistance area product of R0A= 1.37 Ω cm2 was achieved and the ICIP has a cutoff wavelength of 6.5 μm. By adding a backside mirror to the device, the responsivity was increased by 47% caused by the double radiation pass through the absorber. This resulted in a room temperature zero-bias detectivity of 8.3 × 108 Jones at a wavelength of 5.27 μm. Furthermore, oscillations are observed in the detectivity due to light interference from the reflected beam at the semiconductor/metal interface, which manifests the reflected double-pass device functionality unequivocally in the device characteristics.
We demonstrate substrate-emitting resonant cavity interband cascade light emitting diodes (RCICLEDs) based on a single distributed Bragg reflector (DBR). These devices operate in continuous wave mode at room temperature. Compared to standard ICLEDs without a cavity, we achieved an 89% reduction in the emission spectrum width, as indicated by the Full Width Half Maximum (FWHM) of 70 nm. Furthermore, we observed far-field narrowing and improved thermal stability. A single DBR configuration allows the cavity length to be adjusted by adding refractive index-matched material to the top of the epitaxial structure after epitaxial growth. This modification effectively shifts the cavity response towards longer wavelengths. We fabricated emitters comprising two cavities of different lengths, resulting in the emission of two distinct spectral lines that can be independently controlled. This dual-color capability enables one of the emission lines to serve as a built-in reference channel, making these LEDs highly suitable for cost-effective gas-sensing applications.
Molecule and gas sensing is a key technology that is applied in multiple environmental, industrial and medical fields. In particular optical detection technologies enable contactless, nondestructive, highly sensitive and fast detection of even smallest concentrations of trace gases and molecules. During the past years, an increasing demand for mid-infrared (MIR) light sources suitable for, e.g. molecule or gas sensing applications, has driven the development and optimization of novel MIR lasers and light sources, such as quantum cascade lasers (QCL) or interband cascade lasers (ICL). Despite the progress on MIR light sources, there is still a lack in appropriate MIR detectors. Here, we present and discuss two promising and novel GaSb/InAs-based detector concepts. First, resonant tunneling diode (RTD) photodetectors as an alternative to avalanche photodetectors. In RTDs, amplification of photogenerated minority charge carriers is based on modulation of a majority charge carrier resonant tunneling current. Second, interband cascade photodetectors (ICD), in which a cascading scheme allows for fast carrier extraction and a compensation of the diffusion length limitation.
We observe that under illumination and at cryogenic temperatures, plateaus emerge in the current-voltage characteristic of non-photocurrent-matched interband cascade infrared photodetectors (ICIPs) with identical thickness of individual superlattice absorbers. We attribute these plateaus to the formation of internal electric potentials on the order of multiple millivolts originating from a gradually decreasing photocurrent in optically deeper stages caused by light attenuation. At elevated temperatures, the plateaus vanish once the dark current exceeds the maximum photocurrent. Contrarily, in a photocurrent-matched ICIP architecture, with individual absorber thicknesses increasing towards optically deeper stages, no additional internal potentials are formed under illumination. The plateaus are found to show a strong wavelength and bias dependence related to the dispersion of the absorption coefficient of the type-II--superlattice absorbers used. This could potentially be implemented in a two-color-detector approach that allows separation of different spectral bands by biasing of the ICIP.