In this study, we report a compact and versatile gas sensor system combining mid-infrared interband cascade light emitting diodes (MIR-ICLEDs) with substrate-integrated hollow waveguides (iHWGs) toward miniaturized gas sensors. Two readily exchangeable MIR-ICLEDs with center emission wavelengths of 3.4 µm (2941 cm−1) and 5.7 µm (1754 cm−1), respectively, were integrated into a modular sensor system using the iHWG simultaneously as a miniaturized gas cell. The performance of the sensor system for quantitative analysis was evaluated based on calibration functions established for four analytes (i.e., methane, isobutane, acetone, and acetaldehyde) within the respective spectral regions. The utility of such a sensor system as a non-dispersive infrared sensor was tested for various scenarios, including the application of spectral filters, the performance of the individual ICLEDs, and in the analysis of gas mixtures. Furthermore, we demonstrated that the modularity of the sensor design facilitates flexible adaptation to target gas species and available sample volumes, differentiating individual components within gas mixtures.
We demonstrate substrate-emitting resonant cavity interband cascade light emitting diodes (RCICLEDs) based on a single distributed Bragg reflector (DBR). These devices operate in continuous wave mode at room temperature. Compared to standard ICLEDs without a cavity, we achieved an 89% reduction in the emission spectrum width, as indicated by the Full Width Half Maximum (FWHM) of 70 nm. Furthermore, we observed far-field narrowing and improved thermal stability. A single DBR configuration allows the cavity length to be adjusted by adding refractive index-matched material to the top of the epitaxial structure after epitaxial growth. This modification effectively shifts the cavity response towards longer wavelengths. We fabricated emitters comprising two cavities of different lengths, resulting in the emission of two distinct spectral lines that can be independently controlled. This dual-color capability enables one of the emission lines to serve as a built-in reference channel, making these LEDs highly suitable for cost-effective gas-sensing applications.
Mid infrared spectroscopy is a useful tool for quality control in the food production chain. We present Interband Cascade Light Emitting Diodes centered at 5.8 µm that enable cost effective and portable testing of food and feed commodities.
We present ICLEDs emitting at peak wavelengths of around 3.7 µm. A record efficiency was achieved by growing the epitaxial structures on low doped substrates and positioning the active stages at antinodes of the optical field.