In this experiment, we investigated the effects of different reactions on the growth process and morphology of h-MoO3 and α-MoO3, and their optical properties and photocatalytic activities were also investigated. Orthogonal experiments were designed to investigate the effects of four influencing factors, namely the amount of ammonium molybdate tetrahydrate (AHM), the type of acid, the reaction temperature and the holding time, on the morphology of h-MoO3 by a microwave hydrothermal method. The phase and morphology were analyzed by using advanced physicochemical techniques. The XRD results showed that the samples produced by the microwave hydrothermal method had sharp diffraction peaks, high crystallinity and complete crystalline shape. AHM generates h-MoO3 in both hydrochloric and nitric acid environments. In particular, when the temperature rises to 200 °C, the generated h-MoO3 will be converted to α-MoO3 in a nitric acid environment, which will be generated in a sulfuric acid environment. Therefore, increasing the reaction temperature will result in the conversion of h-MoO3 to α-MoO3 in sulfuric acid solution. SEM results show that the sample prepared from hydrochloric acid solution has a complete hexagonal prism morphology, while the sample prepared from sulfuric acid solution presents a long fibrous morphology, and the sample prepared from nitric acid solution has many defects on the surface of the hexagonal prism morphology. Interestingly, sample A11 prepared in nitric acid solution showed a spherical structure. Since the generated A3, A6 and A9 samples are all stable phase α-MoO3, they have a wider band gap compared with other samples. Their particle size is up to the nanometer scale, so they have strong adsorption properties. The spherical sample A11 has excellent adsorption and photocatalytic activity.
12 June 2010 in Journal of Wuhan University of Technology-Mater. Sci. Ed.
Solar energy-absorbing and -storing integrated ceramics are a new type of material that absorbs sunlight and stores it as heat energy, with properties such as high absorptivity, high thermal storage density, and high temperature stability. In this study, forsterite ceramics were prepared from fused magnesia, quartz, α-Al2O3, and Sm2O3, and concurrently, two additives of Fe2O3 and CuO were doped to improve the absorptivity, and the effects of the composite additives on the performance of forsterite ceramics were investigated. The results showed that the optimal Fe2O3/CuO content ratio was 8:2, at which time the apparent porosity, bulk density, and thermal storage density of the sample were 0.21%, 3.08 g/cm3, and 1516.71 kJ/kg (1000 °C), respectively. After 30 thermal shock cycles, the precipitation of samarium silicate in the samples resulted in a tighter grain bonding, increased the bending strength by 70.6%, and exhibited excellent thermal shock resistance. The solar absorptivity reached 93.80% in the 0.3–2.5 μm wavelength range. Fe2O3 doping replaced part of the positions of Al3+ in MgAl2O4 to form MgFe0.6Al1.4O4 phase. This replacement caused lattice distortion, which triggered electronic transition and augmented the intrinsic absorption capacity, thereby enhancing the sample’s absorptivity. CuO’s low reflectivity across the spectrum further reduced sample reflectivity.
About Me
Xiao Hong Xu is a professor at Wuhan University of Technology.
Xiao Hong Xu is a professor at Wuhan University of Technology.